Flexible LDPC Decoder Architectures

Flexible channel decoding is getting significance with the increase in number of wireless standards and modes within a standard. A flexible channel decoder is a solution providing interstandard and intrastandard support without change in hardware. However, the design of efficient implementation of flexible low-density parity-check (LDPC) code decoders satisfying area, speed, and power constraints is a challenging task and still requires considerable research effort. This paper provides an overview of state-of-the-art in the design of flexible LDPC decoders. The published solutions are evaluated at two levels of architectural design: the processing element (PE) and the interconnection structure. A qualitative and quantitative analysis of different design choices is carried out, and comparison is provided in terms of achieved flexibility, throughput, decoding efficiency, and area (power) consumption

Improve the Usability of Polar Codes: Code Construction, Performance Enhancement and Configurable Hardware

Error-correcting codes (ECC) have been widely used for forward error correction (FEC) in modern communication systems to dramatically reduce the signal-to-noise ratio (SNR) needed to achieve a given bit error rate (BER). Newly invented polar codes have attracted much interest because of their capacity-achieving potential, efficient encoder and decoder implementation, and flexible architecture design space.This dissertation is aimed at improving the usability of polar codes by providing a practical code design method, new approaches to improve the performance of polar code, and a configurable hardware design that adapts to various specifications. State-of-the-art polar codes are used to achieve extremely low error rates. In this work, high-performance FPGA is used in prototyping polar decoders to catch rare-case errors for error-correcting performance verification and error analysis. To discover the polarization characteristics and error patterns of polar codes, an FPGA emulation platform for belief-propagation (BP) decoding is built by a semi-automated construction flow. The FPGA-based emulation achieves significant speedup in large-scale experiments involving trillions of data frames. The platform is a key enabler of this work. The frozen set selection of polar codes, known as bit selection, is critical to the error-correcting performance of polar codes. A simulation-based in-order bit selection method is developed to evaluate the error rate of each bit using Monte Carlo simulations. The frozen set is selected based on the bit reliability ranking. The resulting code construction exhibits up to 1 dB coding gain with respect to the conventional bit selection. To further improve the coding gain of BP decoder for low-error-rate applications, the decoding error mechanisms are studied and analyzed, and the errors are classified based on their distinct signatures. Error detection is enabled by low-cost CRC concatenation, and post-processing algorithms targeting at each type of the error is designed to mitigate the vast majority of the decoding errors. The post-processor incurs only a small implementation overhead, but it provides more than an order of magnitude improvement of the error-correcting performance. The regularity of the BP decoder structure offers many hardware architecture choices. Silicon area, power consumption, throughput and latency can be traded to reach the optimal design points for practical use cases. A comprehensive design space exploration reveals several practical architectures at different design points. The scalability of each architecture is also evaluated based on the implementation candidates. For dynamic communication channels, such as wireless channels in the upcoming 5G applications, multiple codes of different lengths and code rates are needed to t varying channel conditions. To minimize implementation cost, a universal decoder architecture is proposed to support multiple codes through hardware reuse. A 40nm length- and rate-configurable polar decoder ASIC is demonstrated to fit various communication environments and service requirements.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/140817/1/shuangsh_1.pd

Energy-Efficient Computing for Mobile Signal Processing

Mobile devices have rapidly proliferated, and deployment of handheld devices continues to increase at a spectacular rate. As today's devices not only support advanced signal processing of wireless communication data but also provide rich sets of applications, contemporary mobile computing requires both demanding computation and efficiency. Most mobile processors combine general-purpose processors, digital signal processors, and hardwired application-specific integrated circuits to satisfy their high-performance and low-power requirements. However, such a heterogeneous platform is inefficient in area, power and programmability. Improving the efficiency of programmable mobile systems is a critical challenge and an active area of computer systems research. SIMD (single instruction multiple data) architectures are very effective for data-level-parallelism intense algorithms in mobile signal processing. However, new characteristics of advanced wireless/multimedia algorithms require architectural re-evaluation to achieve better energy efficiency. Therefore, fourth generation wireless protocol and high definition mobile video algorithms are analyzed to enhance a wide-SIMD architecture. The key enhancements include 1) programmable crossbar to support complex data alignment, 2) SIMD partitioning to support fine-grain SIMD computation, and 3) fused operation to support accelerating frequently used instruction pairs. Near-threshold computation has been attractive in low-power architecture research because it balances performance and power. To further improve energy efficiency in mobile computing, near-threshold computation is applied to a wide SIMD architecture. This proposed near-threshold wide SIMD architecture-Diet SODA-presents interesting architectural design decisions such as 1) very wide SIMD datapath to compensate for degraded performance induced by near-threshold computation and 2) scatter-gather data prefetcher to exploit large latency gap between memory and the SIMD datapath. Although near-threshold computation provides excellent energy efficiency, it suffers from increased delay variations. A systematic study of delay variations in near-threshold computing is performed and simple techniques-structural duplication and voltage/frequency margining-are explored to tolerate and mitigate the delay variations in near-threshold wide SIMD architectures. This dissertation analyzes representative wireless/multimedia mobile signal processing algorithms, proposes an energy-efficient programmable platform, and evaluates performance and power. A main theme of this dissertation is that the performance and efficiency of programmable embedded systems can be significantly improved with a combination of parallel SIMD and near-threshold computations.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86356/1/swseo_1.pd

Low-Power Embedded Design Solutions and Low-Latency On-Chip Interconnect Architecture for System-On-Chip Design

This dissertation presents three design solutions to support several key system-on-chip (SoC) issues to achieve low-power and high performance. These are: 1) joint source and channel decoding (JSCD) schemes for low-power SoCs used in portable multimedia systems, 2) efficient on-chip interconnect architecture for massive multimedia data streaming on multiprocessor SoCs (MPSoCs), and 3) data processing architecture for low-power SoCs in distributed sensor network (DSS) systems and its implementation. The first part includes a low-power embedded low density parity check code (LDPC) - H.264 joint decoding architecture to lower the baseband energy consumption of a channel decoder using joint source decoding and dynamic voltage and frequency scaling (DVFS). A low-power multiple-input multiple-output (MIMO) and H.264 video joint detector/decoder design that minimizes energy for portable, wireless embedded systems is also designed. In the second part, a link-level quality of service (QoS) scheme using unequal error protection (UEP) for low-power network-on-chip (NoC) and low latency on-chip network designs for MPSoCs is proposed. This part contains WaveSync, a low-latency focused network-on-chip architecture for globally-asynchronous locally-synchronous (GALS) designs and a simultaneous dual-path routing (SDPR) scheme utilizing path diversity present in typical mesh topology network-on-chips. SDPR is akin to having a higher link width but without the significant hardware overhead associated with simple bus width scaling. The last part shows data processing unit designs for embedded SoCs. We propose a data processing and control logic design for a new radiation detection sensor system generating data at or above Peta-bits-per-second level. Implementation results show that the intended clock rate is achieved within the power target of less than 200mW. We also present a digital signal processing (DSP) accelerator supporting configurable MAC, FFT, FIR, and 3-D cross product operations for embedded SoCs. It consumes 12.35mW along with 0.167mm2 area at 333MHz

Improving Network-on-Chip-based Turbo Decoder Architectures

In this work novel results concerning Networkon- Chip-based turbo decoder architectures are presented. Stemming from previous publications, this work concentrates first on improving the throughput by exploiting adaptive-bandwidth-reduction techniques. This technique shows in the best case an improvement of more than 60 Mb/s. Moreover, it is known that double-binary turbo decoders require higher area than binary ones. This characteristic has the negative effect of increasing the data width of the network nodes. Thus, the second contribution of this work is to reduce the network complexity to support doublebinary codes, by exploiting bit-level and pseudo-floatingpoint representation of the extrinsic information. These two techniques allow for an area reduction of up to more than the 40 % with a performance degradation of about 0.2 d

Exploring HLS Coding Techniques to Achieve Desired Turbo Decoder Architectures

Software defined radio (SDR) platforms implement many digital signal processing algorithms. These can be accelerated on an FPGA to meet performance requirements. Due to the flexibility of SDR\u27s and continually evolving communications protocols, high level synthesis (HLS) is a promising alternative to standard handcrafted design flows. A crucial component in any SDR is the error correction codes (ECC). Turbo codes are a common ECC that are implemented on an FPGA due to their computational complexity. The goal of this thesis is to explore the HLS coding techniques required to produce a design that targets the desired hardware architecture and can reach handcrafted levels of performance. This work implemented three existing turbo decoder architectures with HLS to produce quality hardware which reaches handcrafted performance. Each targeted design was analyzed to determine its functionality and algorithm so a C implementation could be developed. Then the C code was modified and HLS directives were added to refine the design through the HLS tools. The process of code modification and processing through the HLS tools continued until the desired architecture and performance were reached. Each design was implemented and the bottlenecks were identified and dealt with through appropriate usage of directives and C style. The use of pipelining to bypass bottlenecks added a small overhead from the ramp-up and ramp-down of the pipeline, reducing the performance by at most 1.24%. The impact of the clock constraint set within the HLS tools was also explored. It was found that the clock period and resource usage estimate generated by the HLS tools is not accurate and all evaluations should occur after hardware synthesis