Quality of Service over Specific Link Layers: state of the art report

The Integrated Services concept is proposed as an enhancement to the current Internet architecture, to provide a better Quality of Service (QoS) than that provided by the traditional Best-Effort service. The features of the Integrated Services are explained in this report. To support Integrated Services, certain requirements are posed on the underlying link layer. These requirements are studied by the Integrated Services over Specific Link Layers (ISSLL) IETF working group. The status of this ongoing research is reported in this document. To be more specific, the solutions to provide Integrated Services over ATM, IEEE 802 LAN technologies and low-bitrate links are evaluated in detail. The ISSLL working group has not yet studied the requirements, that are posed on the underlying link layer, when this link layer is wireless. Therefore, this state of the art report is extended with an identification of the requirements that are posed on the underlying wireless link, to provide differentiated Quality of Service

Per-Priority Flow Control (Ppfc) Framework For Enhancing Qos In Metro Ethernet

Day by day Internet communication and services are experiencing an increase in variety and quantity in their capacity and demand. Thus, making traffic management and quality of service (QoS) approaches for optimization of the Internet become a challenging area of research; meanwhile flow control and congestion control will be considered as significant fundamentals for the traffic control especially on the high speed Metro Ethernet. IEEE had standardized a method (IEEE 802.3x standard), which provides Ethernet Flow Control (EFC) using PAUSE frames as MAC control frames in the data link layer, to enable or disable data frame transmission. With the initiation of Metro Carrier Ethernet, the conventional ON/OFF IEEE 802.3x approach may no longer be sufficient. Therefore, a new architecture and mechanism that offer more flexible and efficient flow and congestion control, as well as better QoS provisioning is now necessary

LTE Optimization and Resource Management in Wireless Heterogeneous Networks

Mobile communication technology is evolving with a great pace. The development of the Long Term Evolution (LTE) mobile system by 3GPP is one of the milestones in this direction. This work highlights a few areas in the LTE radio access network where the proposed innovative mechanisms can substantially improve overall LTE system performance. In order to further extend the capacity of LTE networks, an integration with the non-3GPP networks (e.g., WLAN, WiMAX etc.) is also proposed in this work. Moreover, it is discussed how bandwidth resources should be managed in such heterogeneous networks. The work has purposed a comprehensive system architecture as an overlay of the 3GPP defined SAE architecture, effective resource management mechanisms as well as a Linear Programming based analytical solution for the optimal network resource allocation problem. In addition, alternative computationally efficient heuristic based algorithms have also been designed to achieve near-optimal performance

Prospects for Internet technology

This paper surveys the current developments in Internet technology, with a particular emphasis on performance, and the growing need for various guarantees of quality of service. It discusses hardware technologies for increased bandwidth, mechanisms for requesting and providing specific qualities of service, and various scaling issues. Fi-nally it discusses mechanisms needed for (but not the economics of) the Internet in the mass market. To this end, we survey changes in the areas of addressing, and flow management. 1

Quality of service over ATM networks

PhDAbstract not availabl

Evaluating and improving the performance of video content distribution in lossy networks

The contributions in this research are split in to three distinct, but related, areas. The focus of the work is based on improving the efficiency of video content distribution in the networks that are liable to packet loss, such as the Internet. Initially, the benefits and limitations of content distribution using Forward Error Correction (FEC) in conjunction with the Transmission Control Protocol (TCP) is presented. Since added FEC can be used to reduce the number of retransmissions, the requirement for TCP to deal with any losses is greatly reduced. When real-time applications are needed, delay must be kept to a minimum, and retransmissions not desirable. A balance, therefore, between additional bandwidth and delays due to retransmissions must be struck. This is followed by the proposal of a hybrid transport, specifically for H.264 encoded video, as a compromise between the delay-prone TCP and the loss-prone UDP. It is argued that the playback quality at the receiver often need not be 100% perfect, providing a certain level is assured. Reliable TCP is used to transmit and guarantee delivery of the most important packets. The delay associated with the proposal is measured, and the potential for use as an alternative to the conventional methods of transporting video by either TCP or UDP alone is demonstrated. Finally, a new objective measurement is investigated for assessing the playback quality of video transported using TCP. A new metric is defined to characterise the quality of playback in terms of its continuity. Using packet traces generated from real TCP connections in a lossy environment, simulating the playback of a video is possible, whilst monitoring buffer behaviour to calculate pause intensity values. Subjective tests are conducted to verify the effectiveness of the metric introduced and show that the results of objective and subjective scores made are closely correlated

The influence of protocol choice on network performance

Bibliography: leaves 100-102.Computer communication networks are a vital link in providing many of the services that we use daily, and our reliance on these networks is on the increase. The growing use of networks is driving network design towards greater performance. The greater need for network connectivity and increased performance makes the study of network performance constraints important. Networks consist of both hardware and software components. Currently great advances are being made in network hardware, resulting in advances in the available raw network performance. In this thesis, I will show through measurement that it is difficult to harness all the raw performance and to make it available to carry network services. I will also identify some of the factors limiting the full utilization of a high speed network

Traffic Engineering And Supporting QoS

ABSTRACT Traffic Engineering describes techniques for optimising network performance by measuring, modelling, characterizing and controlling Internet traffic for specific performance goals [11]. This is a comprehensive definition. Traffic engineering performance goals typically fall into one of two categories. The first one is traffic related performance objectives such as minimizing packet loss, lowering end-to-end delay, or supporting a contracted Service Level Agreement (SLA). The second category is efficiency related objectives, such as balancing the distribution of traffic across available bandwidth resources. Traffic related performance goals are set in order to meet contracted service levels and offer competitive services to customers. Efficiency related goals, are required by the service provider to minimize the cost of delivering services, especially the cost of utilizing expensive network resources. The objective of this thesis is to present a description of Multi Protocol Label Switching (MPLS) architecture and its functionality to achieve a tool for performing traffic engineering and QoS support. We simulate traffic engineering with MPLS on a simple network and measure its performance. We analyse measurements related to queuing delay, throughput and other traffic related issues. We then move on fine-tuning the MPLS-TE network to also take into consideration QoS support when aggregating flows through a single label- switching path. We combine differentiated services with MPLS architecture in order to support QoS requirements. The simulation tool used in this thesis is called OPNET Modeler version 8.11

Modeling and Optimization of Next-Generation Wireless Access Networks

The ultimate goal of the next generation access networks is to provide all network users, whether they are fixed or mobile, indoor or outdoor, with high data rate connectivity, while ensuring a high quality of service. In order to realize this ambitious goal, delay, jitter, error rate and packet loss should be minimized: a goal that can only be achieved through integrating different technologies, including passive optical networks, 4th generation wireless networks, and femtocells, among others. This thesis focuses on medium access control and physical layers of future networks. In this regard, the first part of this thesis discusses techniques to improve the end-to-end quality of service in hybrid optical-wireless networks. In these hybrid networks, users are connected to a wireless base station that relays their data to the core network through an optical connection. Hence, by integrating wireless and optical parts of these networks, a smart scheduler can predict the incoming traffic to the optical network. The prediction data generated herein is then used to propose a traffic-aware dynamic bandwidth assignment algorithm for reducing the end-to-end delay. The second part of this thesis addresses the challenging problem of interference management in a two-tier macrocell/femtocell network. A high quality, high speed connection for indoor users is ensured only if the network has a high signal to noise ratio. A requirement that can be fulfilled with using femtocells in cellular networks. However, since femtocells generate harmful interference to macrocell users in proximity of them, careful analysis and realistic models should be developed to manage the introduced interference. Thus, a realistic model for femtocell interference outside suburban houses is proposed and several performance measures, e.g., signal to interference and noise ratio and outage probability are derived mathematically for further analysis. The quality of service of cellular networks can be degraded by several factors. For example, in industrial environments, simultaneous fading and strong impulsive noise significantly deteriorate the error rate performance. In the third part of this thesis, a technique to improve the bit error rate of orthogonal frequency division multiplexing systems in industrial environments is presented. This system is the most widely used technology in next-generation networks, and is very susceptible to impulsive noise, especially in fading channels. Mathematical analysis proves that the proposed method can effectively mitigate the degradation caused by impulsive noise and significantly improve signal to interference and noise ratio and bit error rate, even in frequency-selective fading channels