3,948 research outputs found
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
An Analysis of Packet Fragmentation Impact in LPWAN
Packet fragmentation has mostly been addressed in the literature when
referring to splitting data that does not fit a frame. It has received
attention in the IoT community after the 6LoWPAN working group of IETF started
studying the fragmentation headers to allow IPv6 1280 B MTU to be sent over
IEEE 802.15.4 networks supporting a 127 B MTU. In this paper, and following
some of the recent directions taken by the IETF LPWAN WG, an analysis of packet
fragmentation in LPWANs has been done. We aim to identify the impact of sending
the data in smaller fragments considering the restrictions of industrial
duty-cycled networks. The analyzed parameters were the energy consumption,
throughput, goodput and end to end delay introduced by fragmentation. The
results of our analysis show that packet fragmentation can increase the
reliability of the communication in duty-cycle restricted networks. This is of
especial relevance when densifying the network. We observed relevant impact in
energy consumption and extra latency, and identified the need for
acknowledgements from the gateway/sink to exploit some of the benefits raised
by fragmentation.Comment: paper accepted and presented at IEEE Wireless Communications and
Networking Conference, 15-18 April, Barcelona, Spai
Slotted ALOHA Overlay on LoRaWAN: a Distributed Synchronization Approach
LoRaWAN is one of the most promising standards for IoT applications.
Nevertheless, the high density of end-devices expected for each gateway, the
absence of an effective synchronization scheme between gateway and end-devices,
challenge the scalability of these networks. In this article, we propose to
regulate the communication of LoRaWAN networks using a Slotted-ALOHA (S-ALOHA)
instead of the classic ALOHA approach used by LoRa. The implementation is an
overlay on top of the standard LoRaWAN; thus no modification in pre-existing
LoRaWAN firmware and libraries is necessary. Our method is based on a novel
distributed synchronization service that is suitable for low-cost IoT
end-nodes. S-ALOHA supported by our synchronization service significantly
improves the performance of traditional LoRaWAN networks regarding packet loss
rate and network throughput.Comment: 4 pages, 8 figure
Selective Jamming of LoRaWAN using Commodity Hardware
Long range, low power networks are rapidly gaining acceptance in the Internet
of Things (IoT) due to their ability to economically support long-range sensing
and control applications while providing multi-year battery life. LoRa is a key
example of this new class of network and is being deployed at large scale in
several countries worldwide. As these networks move out of the lab and into the
real world, they expose a large cyber-physical attack surface. Securing these
networks is therefore both critical and urgent. This paper highlights security
issues in LoRa and LoRaWAN that arise due to the choice of a robust but slow
modulation type in the protocol. We exploit these issues to develop a suite of
practical attacks based around selective jamming. These attacks are conducted
and evaluated using commodity hardware. The paper concludes by suggesting a
range of countermeasures that can be used to mitigate the attacks.Comment: Mobiquitous 2017, November 7-10, 2017, Melbourne, VIC, Australi
Recommended from our members
Optimal Policy Derivation for Transmission Duty-Cycle Constrained LPWAN
Low-power wide-area network (LPWAN) technologies enable Internet of Things (IoT) devices to efficiently and robustly communicate over long distances, thus making them especially suited for industrial environments. However, the stringent regulations on the usage of certain industrial, scientific, and medical bands in many countries in which LPWAN operate limit the amount of time IoT motes can occupy the shared bands. This is particularly challenging in industrial scenarios, where not being able to report some detected events might result in the failure of critical assets. To alleviate this, and by mathematically modeling LPWAN-based IoT motes, we have derived optimal transmission policies that maximize the number of reported events (prioritized by their importance) while still complying with current regulations. The proposed solution has been customized for two widely known LPWAN technologies: 1) LoRa and 2) Sigfox. Analytical results reveal that our solution is feasible and performs remarkably close to the theoretical limit for a wide range of network activity patterns
Lightweight Synchronization Algorithm with Self-Calibration for Industrial LORA Sensor Networks
Wireless sensor and actuator networks are gaining momentum in the era of
Industrial Internet of Things IIoT. The usage of the close-loop data from
sensors in the manufacturing chain is extending the common monitoring scenario
of the Wireless Sensors Networks WSN where data were just logged. In this paper
we present an accurate timing synchronization for TDMA implemented on the state
of art IoT radio, such as LoRa, that is a good solution in industrial
environments for its high robustness. Experimental results show how it is
possible to modulate the drift correction and keep the synchronization error
within the requirements
- …