High Peformance and Low Power On-Die Interconnect Fabrics.

Increasing power density with technology scaling has caused stagnation in operating frequency of modern day microprocessors. This has led designers to prefer multicore architectures over complex monolithic processors to keep up with the demand for rising computing throughput. Although processing units are getting smaller and simpler, the dramatic rise of their count on a single die has made the fabric that connects these processing units increasingly complex. These interconnect fabrics have become a bottleneck in improving overall system effciency. As a result, the design paradigm for multi-core chips is gradually shifting from a core-centric architecture towards an interconnect-centric architecture, where system efficiency is limited by the fabric rather than the processing ability of any individual core. This dissertation introduces three novel and synergistic circuit techniques to improve scalability of switch fabrics to make on-die integration of hundreds to thousands of cores feasible. 1) A matrix topology is proposed for designing a fully connected switch fabric that re-uses output buses for programming, and stores shue congurations at cross points. This significantly reduces routing congestion, lowers area/power, and improves per- formance. Silicon measurements demonstrate 47% energy savings in a 64-lane SIMD processor fabricated in 65nm CMOS over a conventional implementation. 2) A novel approach to handle high radix arbitration along with data routing is proposed. It optimally uses existing cross-bar interconnect resources without requiring any additional overhead. Bandwidth exceeding 2Tb/s is recorded in a test prototype fabricated in 65nm. 3) Building on the later, a new circuit topology to manage and update priority adaptively within the switch fabric without incurring additional delay or area is then proposed. Several assist circuit techniques, such as a thyristor based sense amplifier and self regenerating bi-directional repeaters are proposed for high speed energy efficient signaling to and from the switch fabric to improve overall routing efficiency. Using these techniques a 64 x 64 switch fabric with 128b data bus fabricated in 45nm achieves a throughput of 4.5Tb/s at single cycle latency while operating at 559MHz.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91506/1/sudhirks_1.pd

Multistage Packet-Switching Fabrics for Data Center Networks

Recent applications have imposed stringent requirements within the Data Center Network (DCN) switches in terms of scalability, throughput and latency. In this thesis, the architectural design of the packet-switches is tackled in different ways to enable the expansion in both the number of connected endpoints and traffic volume. A cost-effective Clos-network switch with partially buffered units is proposed and two packet scheduling algorithms are described. The first algorithm adopts many simple and distributed arbiters, while the second approach relies on a central arbiter to guarantee an ordered packet delivery. For an improved scalability, the Clos switch is build using a Network-on-Chip (NoC) fabric instead of the common crossbar units. The Clos-UDN architecture made with Input-Queued (IQ) Uni-Directional NoC modules (UDNs) simplifies the input line cards and obviates the need for the costly Virtual Output Queues (VOQs). It also avoids the need for complex, and synchronized scheduling processes, and offers speedup, load balancing, and good path diversity. Under skewed traffic, a reliable micro load-balancing contributes to boosting the overall network performance. Taking advantage of the NoC paradigm, a wrapped-around multistage switch with fully interconnected Central Modules (CMs) is proposed. The architecture operates with a congestion-aware routing algorithm that proactively distributes the traffic load across the switching modules, and enhances the switch performance under critical packet arrivals. The implementation of small on-chip buffers has been made perfectly feasible using the current technology. This motivated the implementation of a large switching architecture with an Output-Queued (OQ) NoC fabric. The design merges assets of the output queuing, and NoCs to provide high throughput, and smooth latency variations. An approximate analytical model of the switch performance is also proposed. To further exploit the potential of the NoC fabrics and their modularity features, a high capacity Clos switch with Multi-Directional NoC (MDN) modules is presented. The Clos-MDN switching architecture exhibits a more compact layout than the Clos-UDN switch. It scales better and faster in port count and traffic load. Results achieved in this thesis demonstrate the high performance, expandability and programmability features of the proposed packet-switches which makes them promising candidates for the next-generation data center networking infrastructure

Multistage Packet-Switching Fabrics for Data Center Networks

Recent applications have imposed stringent requirements within the Data Center Network (DCN) switches in terms of scalability, throughput and latency. In this thesis, the architectural design of the packet-switches is tackled in different ways to enable the expansion in both the number of connected endpoints and traffic volume. A cost-effective Clos-network switch with partially buffered units is proposed and two packet scheduling algorithms are described. The first algorithm adopts many simple and distributed arbiters, while the second approach relies on a central arbiter to guarantee an ordered packet delivery. For an improved scalability, the Clos switch is build using a Network-on-Chip (NoC) fabric instead of the common crossbar units. The Clos-UDN architecture made with Input-Queued (IQ) Uni-Directional NoC modules (UDNs) simplifies the input line cards and obviates the need for the costly Virtual Output Queues (VOQs). It also avoids the need for complex, and synchronized scheduling processes, and offers speedup, load balancing, and good path diversity. Under skewed traffic, a reliable micro load-balancing contributes to boosting the overall network performance. Taking advantage of the NoC paradigm, a wrapped-around multistage switch with fully interconnected Central Modules (CMs) is proposed. The architecture operates with a congestion-aware routing algorithm that proactively distributes the traffic load across the switching modules, and enhances the switch performance under critical packet arrivals. The implementation of small on-chip buffers has been made perfectly feasible using the current technology. This motivated the implementation of a large switching architecture with an Output-Queued (OQ) NoC fabric. The design merges assets of the output queuing, and NoCs to provide high throughput, and smooth latency variations. An approximate analytical model of the switch performance is also proposed. To further exploit the potential of the NoC fabrics and their modularity features, a high capacity Clos switch with Multi-Directional NoC (MDN) modules is presented. The Clos-MDN switching architecture exhibits a more compact layout than the Clos-UDN switch. It scales better and faster in port count and traffic load. Results achieved in this thesis demonstrate the high performance, expandability and programmability features of the proposed packet-switches which makes them promising candidates for the next-generation data center networking infrastructure

On-board B-ISDN fast packet switching architectures. Phase 1: Study

The broadband integrate services digital network (B-ISDN) is an emerging telecommunications technology that will meet most of the telecommunications networking needs in the mid-1990's to early next century. The satellite-based system is well positioned for providing B-ISDN service with its inherent capabilities of point-to-multipoint and broadcast transmission, virtually unlimited connectivity between any two points within a beam coverage, short deployment time of communications facility, flexible and dynamic reallocation of space segment capacity, and distance insensitive cost. On-board processing satellites, particularly in a multiple spot beam environment, will provide enhanced connectivity, better performance, optimized access and transmission link design, and lower user service cost. The following are described: the user and network aspects of broadband services; the current development status in broadband services; various satellite network architectures including system design issues; and various fast packet switch architectures and their detail designs

Three Highly Parallel Computer Architectures and Their Suitability for Three Representative Artificial Intelligence Problems

Virtually all current Artificial Intelligence (AI) applications are designed to run on sequential (von Neumann) computer architectures. As a result, current systems do not scale up. As knowledge is added to these systems, a point is reached where their performance quickly degrades. The performance of a von Neumann machine is limited by the bandwidth between memory and processor (the von Neumann bottleneck). The bottleneck is avoided by distributing the processing power across the memory of the computer. In this scheme the memory becomes the processor (a smart memory ). This paper highlights the relationship between three representative AI application domains, namely knowledge representation, rule-based expert systems, and vision, and their parallel hardware realizations. Three machines, covering a wide range of fundamental properties of parallel processors, namely module granularity, concurrency control, and communication geometry, are reviewed: the Connection Machine (a fine-grained SIMD hypercube), DADO (a medium-grained MIMD/SIMD/MSIMD tree-machine), and the Butterfly (a coarse-grained MIMD Butterflyswitch machine)

A multiple-SIMD architecture for image and tracking analysis

The computational requirements for real-time image based applications are such as to warrant the use of a parallel architecture. Commonly used parallel architectures conform to the classifications of Single Instruction Multiple Data (SIMD), or Multiple Instruction Multiple Data (MIMD). Each class of architecture has its advantages and dis-advantages. For example, SIMD architectures can be used on data-parallel problems, such as the processing of an image. Whereas MIMD architectures are more flexible and better suited to general purpose computing. Both types of processing are typically required for the analysis of the contents of an image. This thesis describes a novel massively parallel heterogeneous architecture, implemented as the Warwick Pyramid Machine. Both SIMD and MIMD processor types are combined within this architecture. Furthermore, the SIMD array is partitioned, into smaller SIMD sub-arrays, forming a Multiple-SIMD array. Thus, local data parallel, global data parallel, and control parallel processing are supported. After describing the present options available in the design of massively parallel machines and the nature of the image analysis problem, the architecture of the Warwick Pyramid Machine is described in some detail. The performance of this architecture is then analysed, both in terms of peak available computational power and in terms of representative applications in image analysis and numerical computation. Two tracking applications are also analysed to show the performance of this architecture. In addition, they illustrate the possible partitioning of applications between the SIMD and MIMD processor arrays. Load-balancing techniques are then described which have the potential to increase the utilisation of the Warwick Pyramid Machine at run-time. These include mapping techniques for image regions across the Multiple-SIMD arrays, and for the compression of sparse data. It is envisaged that these techniques may be found useful in other parallel systems