1,191 research outputs found

    An enhanced pulse position modulation (PPM) in ultra-wideband (UWB) systems

    Get PDF
    Simplicity, transmission rate, and bit error rate (BER) performance are three major concerns for ultra-wideband (UWB) systems. The main advantage of existing pulse-position modulation (PPM) schemes is simplicity, but their BER performance is poorer than that of an on-off-keying (OOK) modulation scheme, and their transmission rate is lower than that of an OOK scheme. In this research project, I will explore a novel PPM scheme, which can maintain the simplicity of the PPM schemes as well as achieve a BER performance and a transmission rate similar to the OOK scheme. During the research, I will thoroughly investigate the relationship between pulse position allocation and the BER performance and the transmission rate of UWB systems through computer simulations and theoretical analysis, and develop a whole set of design rules for the novel PPM scheme

    Real-Time Dispersion Code Multiple Access (DCMA) for High-Speed Wireless Communications

    Full text link
    We model, demonstrate and characterize Dispersion Code Multiple Access (DCMA) and hence show the applicability of this purely analog and real-time multiple access scheme to high-speed wireless communications. We first mathematically describe DCMA and show the appropriateness of Chebyshev dispersion coding in this technology. We next provide an experimental proof-of-concept in a 2 X 2 DCMA system. Finally,we statistically characterize DCMA in terms of bandwidth, dispersive group delay swing, system dimension and signal-to-noise ratio

    Comparison of Bit Error Rate and Power Spectral Density on the Ultra Wideband Impulse Radio Systems

    Get PDF
    Ultra-Wideband (UWB) is defined as a wireless transmission scheme that occupies a bandwidth of more than 25% of its center frequency. UWB Impulse Radio (UWB-IR) is a popular implementation of the UWB technology. In UWB-IR, information is encoded in baseband without any carrier modulation. Pulse shaping and baseband modulation scheme are two of the determinants on the performance of the UWB-IR. In this thesis, both temporal and spectral characteristics of the UWB-IR are examined because all radio signals exist in both the time and frequency domains. Firstly, the bit error rate (BER) performance of the UWB-IR is investigated via simulation using three modulation schemes: Pulse position modulation (PPM), on-off shift keying (OOK), and binary phase shift keying (BPSK). The results are verified for three different pulse shaping named Gaussian first derivative, Gaussian second derivative, and return-to-zero (RZ) Manchester. Secondly, the effects of the UWB-IR parameters on the power spectral density (PSD) are investigated because PSD provides information on how the power is distributed over the radio frequency (RF) spectrum and determines the interference of UWB-IR and the existing systems to each other in the spectrum. The investigated UWB-IR parameters include pulse duration, pulse repetition rate, modulation scheme, and pseudorandom codes

    High-speed photonic power-efficient ultra-wideband transceiver based on multiple PM-IM conversions

    Get PDF
    We experimentally demonstrate a novel photonic ultra-wideband (UWB) transceiver with pulse spectral efficiency of 50.97% and transmission speed up to 3.125 Gb/s. The UWB generator only consists of a highly nonlinear fiber (HNLF) and a commercial arrayed-waveguide grating (AWG). By using the concept of multiple cross-phase modulation in the HNLF and multiple phase modulation to intensity modulation conversions in the AWG, a power-efficient UWB pulse is combined with incoherent summation of two asymmetric monocycle pulses with inverted polarities. Benefiting from the ultra-fast response of fiber nonlinearities in the HNLF, onoff keying encoded UWB signals generated at 781.25 Mb/s, 1.5625 Gb/s, and 3.125 Gb/s are all error-free transmitted through a 22.5-km single-mode fiber (SMF) with power penalties lower than 1 dB. The bit-error rate is directly measured on down-converted baseband signals by using optical full rectification and electrical low-pass filtering technologies. The measured electrical spectra before and after 22.5-km SMF link transmission both fully comply with the spectral mask specified by the U.S. Federal Communications Commission (FCC) without power attenuation. © 2006 IEEE.published_or_final_versio

    Performance of Bit Error Rate and Power Spectral Density of Ultra Wideband with Time Hopping Sequences.

    Get PDF
    This thesis focuses on several modulation methods for an ultra wideband (UWB) signal. These methods are pulse position modulation (PPM), binary phase shift keying (BPSK), on/off key shifting (OOK), and pulse amplitude modulation (PAM). In addition, time hopping is considered for these modulation schemes, where the capacity per time frame of time hopping PPM is studied using different spreading ratios. This thesis proves that with the addition of time hopping to all types of modulated UWB signals, the performance of power spectral density improves in all aspects, despite the increase of data per time frame. Note that despite the increase of data per frame, the bit error rate remains the same as standard non-time hopping UWB modulated signals

    UWB Signal Generation and Modulation Based on Photonic Approaches

    Get PDF
    Demands for efficient and reliable wireless communications between computers, mobile phones, and other portable electronic devices in short distances are increasing very fast. Ultra-wideband impulse radio is one of the promising techniques, which has gained much research interests in recent years. It covers a wide scope of applications in short-reach wireless communications. Conventionally, the low-bandwidth electronics can process the UWB signals very well. More recently, microwave photonics has enabled a new paradigm for developing UWB techniques in photonic domain. The photonic approaches offer much higher bandwidth and seamless compatibility with optical fiber networks, which allow for scaling the UWB technology to more advanced application scenarios. This chapter is included because photonic approaches have become a unique and effective technique in microwave signal processing. We do not attempt to offer a comprehensive review of UWB photonics, but rather to introduce the typical photonic solutions for UWB signal generation, modulation, transmission, down conversion, and so on
    • …
    corecore