End-Fire Silicon Optical Phased Array with Half-Wavelength Spacing

We demonstrate a one-dimensional optical phased array on an integrated silicon platform for operation at 1.55 microns. Light is emitted end-fire from the chip edge where the waveguides are terminated. The innovative design and high confinement afforded by the silicon waveguides enables lambda/2 spacing (775-nm pitch) at the output. Steering is achieved by inducing a phase shift between the waveguides via integrated thermo-optic heaters. The device forms a beam with a FWHM angular width of 17 degrees, and we demonstrate beam steering over a 64 degrees range

Speckle Reduction in Projection Systems

A speckle pattern is a quasi-random interference pattern which typically emerges when lasers are used as illumination sources in projection applications and which severely degrades the image quality. Since in most projection applications high speckle disturbance is not tolerable, speckle reduction is a major issue. This work gives an introduction into the theoretical description of speckle and investigates different practical methods for speckle reduction in laser projection systems

Coded access optical sensor (CAOS) imager

High spatial resolution, low inter-pixel crosstalk, high signal-to-noise ratio (SNR), adequate application dependent speed, economical and energy efficient design are common goals sought after for optical image sensors. In optical microscopy, overcoming the diffraction limit in spatial resolution has been achieved using materials chemistry, optimal wavelengths, precision optics and nanomotion-mechanics for pixel-by-pixel scanning. Imagers based on pixelated imaging devices such as CCD/CMOS sensors avoid pixel-by-pixel scanning as all sensor pixels operate in parallel, but these imagers are fundamentally limited by inter-pixel crosstalk, in particular with interspersed bright and dim light zones. In this paper, we propose an agile pixel imager sensor design platform called Coded Access Optical Sensor (CAOS) that can greatly alleviate the mentioned fundamental limitations, empowering smart optical imaging for particular environments. Specifically, this novel CAOS imager engages an application dependent electronically programmable agile pixel platform using hybrid space-time-frequency coded multiple-access of the sampled optical irradiance map. We demonstrate the foundational working principles of the first experimental electronically programmable CAOS imager using hybrid time-frequency multiple access sampling of a known high contrast laser beam irradiance test map, with the CAOS instrument based on a Texas Instruments (TI) Digital Micromirror Device (DMD). This CAOS instrument provides imaging data that exhibits 77 dB electrical SNR and the measured laser beam image irradiance specifications closely match (i.e., within 0.75% error) the laser manufacturer provided beam image irradiance radius numbers. The proposed CAOS imager can be deployed in many scientific and non-scientific applications where pixel agility via electronic programmability can pull out desired features in an irradiance map subject to the CAOS imaging operation

Coded access optical sensor (CAOS) imager

High spatial resolution, low inter-pixel crosstalk, high signal-to-noise ratio (SNR), adequate application dependent speed, economical and energy efficient design are common goals sought after for optical image sensors. In optical microscopy, overcoming the diffraction limit in spatial resolution has been achieved using materials chemistry, optimal wavelengths, precision optics and nanomotion-mechanics for pixel-by-pixel scanning. Imagers based on pixelated imaging devices such as CCD/CMOS sensors avoid pixel-by-pixel scanning as all sensor pixels operate in parallel, but these imagers are fundamentally limited by inter-pixel crosstalk, in particular with interspersed bright and dim light zones. In this paper, we propose an agile pixel imager sensor design platform called Coded Access Optical Sensor (CAOS) that can greatly alleviate the mentioned fundamental limitations, empowering smart optical imaging for particular environments. Specifically, this novel CAOS imager engages an application dependent electronically programmable agile pixel platform using hybrid space-time-frequency coded multiple-access of the sampled optical irradiance map. We demonstrate the foundational working principles of the first experimental electronically programmable CAOS imager using hybrid time-frequency multiple access sampling of a known high contrast laser beam irradiance test map, with the CAOS instrument based on a Texas Instruments (TI) Digital Micromirror Device (DMD). This CAOS instrument provides imaging data that exhibits 77 dB electrical SNR and the measured laser beam image irradiance specifications closely match (i.e., within 0.75% error) the laser manufacturer provided beam image irradiance radius numbers. The proposed CAOS imager can be deployed in many scientific and non-scientific applications where pixel agility via electronic programmability can pull out desired features in an irradiance map subject to the CAOS imaging operation

Review of high-contrast imaging systems for current and future ground-based and space-based telescopes III: technology opportunities and pathways

The Optimal Optical CoronagraphWorkshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 30 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. This contribution is the final part of a series of three papers summarizing the outcomes of the workshop, and presents an overview of novel optical technologies and systems that are implemented or considered for high-contrast imaging instruments on both ground-based and space telescopes. The overall objective of high contrast instruments is to provide direct observations and characterizations of exoplanets at contrast levels as extreme as 10^(-10). We list shortcomings of current technologies, and identify opportunities and development paths for new technologies that enable quantum leaps in performance. Specifically, we discuss the design and manufacturing of key components like advanced deformable mirrors and coronagraphic optics, and their amalgamation in "adaptive coronagraph" systems. Moreover, we discuss highly integrated system designs that combine contrast-enhancing techniques and characterization techniques (like high-resolution spectroscopy) while minimizing the overall complexity. Finally, we explore extreme implementations using all-photonics solutions for ground-based telescopes and dedicated huge apertures for space telescopes

Body surface imaging

An embodiment of the invention may provide a portable, inexpensive two-view 3D stereo vision imaging system, which acquires a 3D surface model and dimensions of an object. The system may comprise front-side and back-side stereo imagers which each have a projector and at least two digital cameras to image the object from different perspectives. An embodiment may include a method for reconstructing an image of a human body from the data of a two-view body scanner by obtaining a front scan image data point set and a back scan image data point set. A smooth body image may be gained by processing the data point sets using the following steps: (1) data resampling; (2) initial mesh generation; (3) mesh simplification; and (4) mesh subdivision and optimization.Board of Regents, University of Texas Syste

Bio-Inspired Multi-Spectral Imaging Sensors and Algorithms for Image Guided Surgery

Image guided surgery (IGS) utilizes emerging imaging technologies to provide additional structural and functional information to the physician in clinical settings. This additional visual information can help physicians delineate cancerous tissue during resection as well as avoid damage to near-by healthy tissue. Near-infrared (NIR) fluorescence imaging (700 nm to 900 nm wavelengths) is a promising imaging modality for IGS, namely for the following reasons: First, tissue absorption and scattering in the NIR window is very low, which allows for deeper imaging and localization of tumor tissue in the range of several millimeters to a centimeter depending on the tissue surrounding the tumor. Second, spontaneous tissue fluorescence emission is minimal in the NIR region, allowing for high signal-to-background ratio imaging compared to visible spectrum fluorescence imaging. Third, decoupling the fluorescence signal from the visible spectrum allows for optimization of NIR fluorescence while attaining high quality color images. Fourth, there are two FDA approved fluorescent dyes in the NIR region—namely methylene blue (MB) and indocyanine green—which can help to identify tumor tissue due to passive accumulation in human subjects. The aforementioned advantages have led to the development of NIR fluorescence imaging systems for a variety of clinical applications, such as sentinel lymph node imaging, angiography, and tumor margin assessment. With these technological advances, secondary surgeries due to positive tumor margins or damage to healthy organs can be largely mitigated, reducing the emotional and financial toll on the patient. Currently, several NIR fluorescence imaging systems (NFIS) are available commercially or are undergoing clinical trials, such as FLARE, SPY, PDE, Fluobeam, and others. These systems capture multi-spectral images using complex optical equipment and are combined with real-time image processing to present an augmented view to the surgeon. The information is presented on a standard monitor above the operating bed, which requires the physician to stop the surgical procedure and look up at the monitor. The break in the surgical flow sometimes outweighs the benefits of fluorescence based IGS, especially in time-critical surgical situations. Furthermore, these instruments tend to be very bulky and have a large foot print, which significantly complicates their adoption in an already crowded operating room. In this document, I present the development of a compact and wearable goggle system capable of real-time sensing of both NIR fluorescence and color information. The imaging system is inspired by the ommatidia of the monarch butterfly, in which pixelated spectral filters are integrated with light sensitive elements. The pixelated spectral filters are fabricated via a carefully optimized nanofabrication procedure and integrated with a CMOS imaging array. The entire imaging system has been optimized for high signal-to-background fluorescence imaging using an analytical approach, and the efficacy of the system has been experimentally verified. The bio-inspired spectral imaging sensor is integrated with an FPGA for compact and real-time signal processing and a wearable goggle for easy integration in the operating room. The complete imaging system is undergoing clinical trials at Washington University in the St. Louis Medical School for imaging sentinel lymph nodes in both breast cancer patients and melanoma patients

National MEMS Technology Roadmap - Markets, Applications and Devices

MEMS teknologiaa on jo pitkään käytetty lukuisien eri laitteiden valmistamiseen. Osa näistä laitteista on ollut markkinoilla jo useita vuosia, kun taas osa on vasta kehitysvaiheessa. Jotta tutkimus ja kehitystyötä osattaisiin jatkossa kohdistaa oikeille painopistealueille, on tärkeää tietää mihin suuntaan kehitys on menossa. Tämä työ on osa kansallista MEMS teknologioiden tiekartta -projektia ja sen tavoitteena oli selvittää MEMS laitteiden kehityksen suuntaa. Työ toteutettiin laajana kirjallisuustutkimuksena. Lisäksi tulosten tueksi haastateltiin asiantuntijoita Suomen MEMS teollisuudesta. Työssä tarkasteltiin lukuisia jo markkinoilta löytyviä ja vasta kehitteillä olevia MEMS laitteita ja analysoitiin niitä sekä teknisestä että kaupallisesta näkökulmasta. Tutkimuksen perusteella kävi ilmi, että MEMS markkinat ovat pitkään muodostuneet vakiintuneista laitteista kuten mustesuihkupäistä, kiihtyvyysantureista, paineantureista sekä RF suotimista. Lisäksi mikrofonit, gyroskoopit ja optiset laitteet ovat olleet kaupallisesti saatavilla jo pitkään. Markkinat ovat hiljattain alkaneet tehdä tilaa myös uusille MEMS laitteille, joita tulee ulos nopeaa vauhtia. Viimeisimpänä markkinoille tulleita laitteita ovat erilaiset mikrofluidistiikka laitteet, mikrobolometrit sekä yhdistelmäanturit. Pian kaupallisesti saatavia laitteita ovat magnetometrit, automaattitarkennuslaitteet sekä MEMS oskillaattorit. Näiden laitteiden lisäksi kehitteillä on monia uusia MEMS laitteita, jotka saattavat tarjota merkittäviä mahdollisuuksia tulevaisuudessa. Kehitteillä olevia laitteita ovat erilaiset lääketieteelliset laitteet, atomikellot, mikrojäähdyttimet, mikrokaiuttimet, energiantuottolaitteet sekä RFID-laitteet. Kaikki kehitteillä olevista laitteista eivät välttämättä tule menestymään kaupallisesti, mutta jatkuva tutkimustyö osoittaa, että monilla MEMS laitteilla on potentiaalia useissa eri sovelluksissa. Markkinanäkökulmasta tarkasteltuna suurin potentiaali piilee kuluttajaelektroniikka markkinoilla. Muita tulevaisuuden kannalta potentiaalisia markkinoita ovat lääketieteelliset ja teollisuusmarkkinat. Tutkimus osoitti että MEMS laitteiden tutkimukseen ja kehitykseen liittyy monia potentiaalisia painopistealueita tulevaisuudessa. Käyttömahdollisuuksien parantamiseksi monet jo vakiintuneet laitteet kaipaavat vielä parannuksia. Toisaalta, jo olemassa olevia laitteita voidaan hyödyntää uusissa sovelluksissa. Lisäksi monet uusista ja kehitteillä olevista MEMS laitteista vaativat vielä kehitystyötä.MEMS technology has long been applied to the fabrication of various devices from which some have already been in use for several years, whereas others are still under development. In order to find future focus areas in research and development activities in the industry, it is important to know where the development is going. This thesis was conducted as a part of National MEMS technology roadmap, and it aimed for determining the evolution of MEMS devices. The work was conducted as an extensive literature review. In addition, experts from the Finnish MEMS industry were interviewed in order obtain a broader insight to the results. In this thesis various existing and emerging MEMS devices were reviewed and analyzed from technological and commercial perspectives. The study showed that the MEMS market has long been composed of established devices, such as inkjet print-heads, pressure sensors, accelerometers and RF filters. Also gyroscopes, microphones and optical MEMS devices have already been on the market for a long time. Lately, many new devices have started to find their place in the markets. The most recently introduced commercial devices include microfluidic devices, micro bolometers, and combo sensors. There are also a few devices including magnetometers, MEMS oscillators, and auto-focus devices that are currently crossing the gap from R&D to commercialization. In addition to the already available devices, many new MEMS devices are under development, and might offer significant opportunities in the future. These emerging devices include various bioMEMS devices, atomic clocks, micro-coolers, micro speakers, power MEMS devices, and RFID devices. All of the emerging devices might not find commercial success, but the constant stream shows, that there are numerous applications, where MEMS devices could be applied in. From a market point of view, the greatest potential in the future lies in consumer electronics market. Other highly potential markets include medical and industrial markets. The results of the thesis indicate that there are many potential focus areas in the future related to MEMS devices, including improvements of the existing devices in order to gain better utilization, application of the existing devices in new areas, and development work among the emerging devices

Smart optical imaging systems with automated electronics

In this dissertation, proposed and demonstrated are several novel smart electronically automated optical designs to efficiently solve existing real-world problems in the field of shape sensing and imaging. First half of the thesis proposes shape sensing techniques that use an Electronically Controlled Variable Focus Lens (ECVFL) within a smart optical design suitable for a wide range of applications including shape sensing and projection displays. The second part of this dissertation involves the use of the Digital Micromirror Device (DMD) deployed within several smart optical designs including an embedded laser beam profiler and a new camera idea which is inspired by the Telecommunication science field. Specifically, proposed and demonstrated is the design and implementation of the novel imaging device called Coded Access Optical Sensor (CAOS) where CAOS is able of operating with different application dependent working modes. Experimentally and successfully demonstrated for the first time are its use for coherent light laser imaging as well as for incoherent imaging of a high dynamic range white light scenario. It is also shown how its design can be further extended for multispectral and hyperspectral imaging applications