IEEE 802.11ad V2V-radar : a joint vehicle-to-vehicle communication and automotive radar system

Proprietary millimeter wave (mmWave) radar technologies are widely used in luxury cars to enable active safety functions such as cruise control and collision avoidance. Vehicle-to-vehicle (V2V) communication using the dedicated short range communication (DSRC) technology permits basic low-latency safety applications such as forward collision detection in the 5.9 GHz band. The DSRC technology supports only low data rates, which is not sufficient to handle the gigabytes that can be generated in the next generation vehicles. This challenge can, however, be overcome by using mmWave V2V communication technology that has not been adopted yet by the automotive industry. In this thesis, we propose an IEEE 802.11ad V2V-radar system that leverages the waveform and the typical receiver algorithms of a mmWave consumer WLAN standard to enable a joint framework of vehicular communication and radar technologies at 60 GHz. It will lead to efficient spectrum usage, enhanced performance and increased penetration in the vehicles with minimal size and cost of the hardware. Our theoretical analyses and numerical simulations show promising results; Gbps data rate is achieved simultaneously with cm-level range accuracy, cm/s-level velocity accuracy and high probability of detection at a significantly low false alarm rate.Electrical and Computer Engineerin

Integrated Sensing and Communication with MOCZ Waveform

In this work, we propose a waveform based on Modulation on Conjugate-reciprocal Zeros (MOCZ) originally proposed for short-packet communications in [1], as a new Integrated Sensing and Communication (ISAC) waveform. Having previously established the key advantages of MOCZ for noncoherent and sporadic communication, here we leverage the optimal auto-correlation property of Binary MOCZ (BMOCZ) for sensing applications. Due to this property, which eliminates the need for separate communication and radar-centric waveforms, we propose a new frame structure for ISAC, where pilot sequences and preambles become obsolete and are completely removed from the frame. As a result, the data rate can be significantly improved. Aimed at (hardware-) cost-effective radar-sensing applications, we consider a Hybrid Digital-Analog (HDA) beamforming architecture for data transmission and radar sensing. We demonstrate via extensive simulations, that a communication data rate, significantly higher than existing standards can be achieved, while simultaneously achieving sensing performance comparable to state-of-the-art sensing systems

Simulation framework for multigigabit applications at 60 GHz

This dissertation describes the implementation of a OFDM-based simulation framework for multigigabit applications at 60 GHz band over indoor multipath fading channels. The main goal of the framework is to provide a modular simulation tool designed for high data rate application in order to be easily adapted to a speci c standard or technology, such as 5G. The performance of OFDM using mmWave signals is severely a ected by non-linearities of the RF front-ends. This work analyses the impact of RF impairments in an OFDM system over multipath fading channels at 60 GHz using the proposed simulation framework. The impact of those impairments is evaluated through the metrics of BER, CFR, operation range and PSNR for residential and kiosk scenarios, suggested by the standard for LOS and NLOS. The presented framework allows the employment of 16 QAM or 64 QAM modulation scheme, and the length of the cyclic pre x extension is also con gurable. In order to simulate a realistic multipath fading channel, the proposed framework allows the insertion of a channel impulse response de ned by the user. The channel estimation can be performed either using pilot subcarriers or Golay sequence as channel estimation sequences. Independently of the channel estimation technique selected, frequency domain equalization is available through ZF approach or MMSE. The simulation framework also allows channel coding techniques in order to provide a more robustness transmission and to improve the link budget

Usean gigabitin langaton tiedonsiirto 60 GHz:lla: keilanmuodostus ja mittauksia

Usage of wireless communication systems has been growing steadily during the past decades as more and more services and users are starting to utilize various cloud based systems. Need for higher data rates and the exponential increase of users are becoming significant difficulties for the current wireless communication systems. To tackle this problem, frequency bands of several gigahertz have been suggested for the next generation of local and personal communication systems (WLAN/WPAN). The extremely large unlicensed band at 60 GHz is an attractive option to provide multi-gigabit data rates over short distances. However, even at short distances systems have to compensate the poor link budget which is due to increased frequency and bandwidth. To mitigate these losses, highly directional communication with antenna arrays and beamforming is proposed. IEEE 802.11ad standard is one of the most promising millimeter wave standards to offer multi-gigabit data rates for WLAN/WPAN use. In comparison to the legacy IEEE 802.11 standards, the IEEE 802.11ad introduces completely new medium access control (MAC) and physical (PHY) layers due to highly directional communication. This thesis studies the IEEE 802.11ad standard, focusing on the renewed MAC and PHY layers, beamforming mechanisms, and overall performance in a home environment. While previous academic work has included measurements at 60 GHz, these measurements have been limited to laboratory and office areas which do not realistically model an actual end-user environment. Additionally, the measurement equipment in these research papers has not explicitly implemented the IEEE 802.11ad standard. Hence, measurements in this thesis are conducted with a prototype implementing the mandatory parts of the standard resulting in a more thorough realization of the performance. The results indicate that the prototype performs well in a home environment. Overall, theoretical PHY data rates of above 2 Gbps are to be expected in most cases if operated in similar environment

A Detailed Characterization of 60 GHz Wi-Fi (IEEE 802.11ad)

The emergence of wireless local area network (WLAN) standards and the global system of mobile communication (GSM) in the early 1990s incited tremendous growth in the demand for wireless connectivity. Iterative technological enhancements to cellular and WLAN improved wireless capacity and created a breadth of new mobile applications. The continued increase in display resolutions and image quality combined with streaming displacing satellite/cable has created unprecedented demands on wireless infrastructure. Data-caps on cellular networks deter over consumption and increasingly shift the growing burden to Wi-Fi networks. The traditional 2.4/5 GHz Wi-Fi bands have become overloaded and the increasing number of wireless devices in the home, public, and workplace create difficult challenges to deliver quality service to large numbers of client stations. In dense urban areas, the wireless medium is subjected to increased interference due to overlapping networks and other devices communicating in the same frequency bands. Improvements to conventional Wi-Fi are approaching their theoretical limits and higher order enhancements require idealized conditions which are seldom attainable in practice. In an effort to supplant to scaling capacity requirements a very high frequency WLAN amendment has been proposed (IEEE 802.11ad). IEEE 802.11ad, also referred to as Wireless Gigabit (WiGig), operates in the globally unlicensed 60 GHz band and offers channel bandwidths nearly 100x as wide as 802.11n. The higher bandwidth facilitates multi-Gbps throughput even with the use of lower complexity modulation coding schemes (MCS). IEEE 802.11ad relies heavily on rate adaptation and high beamforming gain to mitigate interference and fading as signals in the 60 GHz band suffer from higher atmospheric ab- sorption and free space path loss (FSPL). Due to the unique nature of 60 GHz wireless there have been numerous research efforts. Many studies have been directed at simulation and modeling of the 60 GHz channel. However modeling the channel is difficult as real- world environments are highly dynamic with varying link quality and conditions which cannot be accurately predicted by conventional techniques. Some research is focused on medium access control (MAC) enhancements to improve overall capacity by coordinating concurrent links or reducing communication overhead for example. Lastly, there has been a limited amount of real world testing of 802.11ad due to lack of availability of commercial platforms and measurement instrumentation. Some researchers tested early generation devices in certain use cases such as in vehicles for media streaming, in data centers to augment the wired network, or in basic indoor and outdoor environments. This research contains two main components. In the first study, analytical models are applied to estimate line of sight (LOS) 802.11ad performance for realistic antenna param- eters. The second part contains a comprehensive evaluation of performance and reliability of early generation 802.11ad hardware. This characterization emphasizes environmen- tal performance (e.g. conference room, cubical farm, open office), multiple-client testing (multiclient), multiple network interference (spatial re-use), and stability in the presence of station mobility, physical obstructions, and antenna misalignment. In order to evaluate 802.11ad, early generation platforms from technology vendors were used in extensive test suites. The hardware tested included docks for wireless personal area networking (WPAN) applications, client laptop stations, and reference design access points (APs). Finally, a customized proof-of-concept (PoC) platform was engineered which allowed finer control over front end antenna configuration parameters such as: topology, placement and orienta- tion. The PoC also served as a suitable means to identify practical limitations and system design engineering challenges associated with supporting directional multi-Gbps (DMG) communication in the 60 GHz band

Ultra-Wideband Secure Communications and Direct RF Sampling Transceivers

Larger wireless device bandwidth results in new capabilities in terms of higher data rates and security. The 5G evolution is focus on exploiting larger bandwidths for higher though-puts. Interference and co-existence issues can also be addressed by the larger bandwidth in the 5G and 6G evolution. This dissertation introduces of a novel Ultra-wideband (UWB) Code Division Multiple Access (CDMA) technique to exploit the largest bandwidth available in the upcoming wireless connectivity scenarios. The dissertation addresses interference immunity, secure communication at the physical layer and longer distance communication due to increased receiver sensitivity. The dissertation presents the design, workflow, simulations, hardware prototypes and experimental measurements to demonstrate the benefits of wideband Code-Division-Multiple-Access. Specifically, a description of each of the hardware and software stages is presented along with simulations of different scenarios using a test-bench and open-field measurements. The measurements provided experimental validation carried out to demonstrate the interference mitigation capabilities. In addition, Direct RF sampling techniques are employed to handle the larger bandwidth and avoid analog components. Additionally, a transmit and receive chain is designed and implemented at 28 GHz to provide a proof-of-concept for future 5G applications. The proposed wideband transceiver is also used to demonstrate higher accuracy direction finding, as much as 10 times improvement

Beam alignment for millimeter wave vehicular communications

Millimeter wave (mmWave) has the potential to provide vehicles with high data rate communications that will enable a whole new range of applications. Its use, however, is not straightforward due to its challenging propagation characteristics. One approach to overcome the propagation challenge is the use of directional beams, but it requires a proper alignment and presents a challenging engineering problem, especially under the high vehicular mobility. In this dissertation, fast and efficient beam alignment solutions suitable for vehicular applications are developed. To better quantify the problem, first the impact of directional beams on the temporal variation of the channels is investigated theoretically. The proposed model includes both the Doppler effect and the pointing error due to mobility. The channel coherence time is derived, and a new concept called the beam coherence time is proposed for capturing the overhead of mmWave beam alignment. Next, an efficient learning-based beam alignment framework is proposed. The core of this framework is the beam pair selection methods that use side information (position in this case) and past beam measurements to identify promising beam directions and eliminate unnecessary beam training. Three offline learning methods for beam pair selection are proposed: two statistics-based and one machine learning-based methods. The two statistical learning methods consist of a heuristic and an optimal selection that minimizes the misalignment probability. The third one uses a learning-to-rank approach from the recommender system literature. The proposed approach shows an order of magnitude lower overhead than existing standard (IEEE 802.11ad) enabling it to support large arrays at high speed. Finally, an online version of the optimal statistical learning method is developed. The solution is based on the upper confidence bound algorithm with a newly introduced risk-aware feature that helps avoid severe misalignment during the learning. Along with the online beam pair selection, an online beam pair refinement is also proposed for learning to adapt the codebook to the environment to further maximize the beamforming gain. The combined solution shows a fast learning behavior that can quickly achieve positive gain over the exhaustive search on the original (and unrefined) codebook. The results show that side information can help reduce mmWave link configuration overhead.Electrical and Computer Engineerin