A wideband linear tunable CDTA and its application in field programmable analogue array

This document is the Accepted Manuscript version of the following article: Hu, Z., Wang, C., Sun, J. et al. ‘A wideband linear tunable CDTA and its application in field programmable analogue array’, Analog Integrated Circuits and Signal Processing, Vol. 88 (3): 465-483, September 2016. Under embargo. Embargo end date: 6 June 2017. The final publication is available at Springer via https://link.springer.com/article/10.1007%2Fs10470-016-0772-7 © Springer Science+Business Media New York 2016In this paper, a NMOS-based wideband low power and linear tunable transconductance current differencing transconductance amplifier (CDTA) is presented. Based on the NMOS CDTA, a novel simple and easily reconfigurable configurable analogue block (CAB) is designed. Moreover, using the novel CAB, a simple and versatile butterfly-shaped FPAA structure is introduced. The FPAA consists of six identical CABs, and it could realize six order current-mode low pass filter, second order current-mode universal filter, current-mode quadrature oscillator, current-mode multi-phase oscillator and current-mode multiplier for analog signal processing. The Cadence IC Design Tools 5.1.41 post-layout simulation and measurement results are included to confirm the theory.Peer reviewedFinal Accepted Versio

Translinear signal processing circuits in standard CMOS FPAA

In this paper, the implementation of signal processing circuits on a novel translinear Field-Programmable Analog Array (FPAA) testchip is reported. The FPAA testchip is based on a 0.35-micron, fully CMOS translinear element, which is the core block of a reconfigurable analog cell. The FPAA embeds a 5 5 cell array. As implementation examples, a four-quadrant multiplier with five decade dynamic range and a programmable fourth-order low-pass filter with up to 7 MHz bandwidth have been mapped on the translinear FPAA. 14 cells have been used for the four-quadrant multiplier while 18 cells were needed for the fourth-order low-pass filter.Postprint (published version

Analog signal processing on a reconfigurable platform

The Cooperative Analog/Digital Signal Processing (CADSP) research group's approach to signal processing is to see what opportunities lie in adjusting the line between what is traditionally computed in digital and what can be done in analog. By allowing more computation to be done in analog, we can take advantage of its low power, continuous domain operation, and parallel capabilities. One setback keeping Analog Signal Processing (ASP) from achieving more wide-spread use, however, is its lack of programmability. The design cycle for a typical analog system often involves several iterations of the fabrication step, which is labor intensive, time consuming, and expensive. These costs in both time and money reduce the likelihood that engineers will consider an analog solution. With CADSP's development of a reconfigurable analog platform, a Field-Programmable Analog Array (FPAA), it has become much more practical for systems to incorporate processing in the analog domain. In this Thesis, I present an entire chain of tools that allow one to design simply at the system block level and then compile that design onto analog hardware. This tool chain uses the Simulink design environment and a custom library of blocks to create analog systems. I also present several of these ASP blocks, covering a broad range of functions from matrix computation to interfacing. In addition to these tools and blocks, the most recent FPAA architectures are discussed. These include the latest RASP general-purpose FPAAs as well as an adapted version geared toward high-speed applications.M.S.Committee Chair: Hasler, Paul; Committee Member: Anderson, David; Committee Member: Ghovanloo, Maysa

Analog Reconfigurable Circuits

The aim of this paper is to present an overview of a new branch of analog electronics represented by analog reconfigurable circuits. The reconfiguration of analog circuits has been known and used since the beginnings of electronics, but the universal reconfigurable circuits called Field Programmable Analog Arrays (FPAA) have been developed over the last two decades. This paper presents the classification of analog circuit reconfiguration, examples of FPAA solutions obtained as academic projects and commercially available ones, as well as some application examples of the dynamic reconfiguration of FPAA.

Palmo : a novel pulsed based signal processing technique for programmable mixed-signal VLSI

In this thesis a new signal processing technique is presented. This technique exploits the use of pulses as the signalling mechanism. This Palmo 1 signalling method applied to signal processing is novel, combining the advantages of both digital and analogue techniques. Pulsed signals are robust, inherently low-power, easily regenerated, and easily distributed across and between chips. The Palmo cells used to perform analogue operations on the pulsed signals are compact, fast, simple and programmable

Ultra-Low-Power Configurable Analog Signal Processor for Wireless Sensors

The demand for on-chip low-power Complementary Metal Oxide Semiconductor (CMOS) analog signal processing has significantly increased in recent years. Digital signal processors continue to shrink in size as transistors half in size every two years. However, digital signal processors (DSP\u27s) notoriously use more power than analog signal processors (APS\u27s). This thesis presents a configurable analog signal processor (CASP) used for wireless sensors. This CASP contains a multitude of processing blocks include the following: low pass filter (LPF), high pass filter (HPF) integrator, differentiator, operational transconductance amplifier (OTA), rectifier with absolute value functionality, and multiplier. Each block uses current-mode processing and operates in the sub-threshold region of operation. Current-mode processing allows for noise reduction, lower power consumption, and better dynamic range. Each block contains configurable current sources and capacitor banks for maximum adaptability. The blocks were designed, simulated, and fabricated in Cadence using IBM\u27s 130nm CMOS process. The processing blocks were combined into a four by three array and connected using specially designed interconnect fabric. A test structure including the LPF, HPF, and multiplier was also constructed for characterization purposes. The main goals for this project are frequency compression and creating a non-linear energy operator for neural spike detection. The test results for the low-pass filter, integrator, and frequency divider reflected the simulated values. The other blocks didn\u27t perform as well as in simulation. The interconnect fabric ties all the blocks together and achieved maximum configurability with negligible attenuation. In simulation, frequency compression was achieved with 30u[micro]W of power from a 1V supply rail

Large scale reconfigurable analog system design enabled through floating-gate transistors

This work is concerned with the implementation and implication of non-volatile charge storage on VLSI system design. To that end, the floating-gate pFET (fg-pFET) is considered in the context of large-scale arrays. The programming of the element in an efficient and predictable way is essential to the implementation of these systems, and is thus explored. The overhead of the control circuitry for the fg-pFET, a key scalability issue, is examined. A light-weight, trend-accurate model is absolutely necessary for VLSI system design and simulation, and is also provided. Finally, several reconfigurable and reprogrammable systems that were built are discussed.Ph.D.Committee Chair: Hasler, Paul E.; Committee Member: Anderson, David V.; Committee Member: Ayazi, Farrokh; Committee Member: Degertekin, F. Levent; Committee Member: Hunt, William D