10,718 research outputs found
A nanometer-scale optical electrometer
Self-assembled semiconductor quantum dots show remarkable optical and spin
coherence properties, which have lead to a concerted research effort examining
their potential as a quantum bit for quantum information science1-6. Here, we
present an alternative application for such devices, exploiting recent
achievements of charge occupation control and the spectral tunability of the
optical emission of quantum dots by electric fields7 to demonstrate
high-sensitivity electric field measurement. In contrast to existing
nanometer-scale electric field sensors, such as single electron transistors8-11
and mechanical resonators12,13, our approach relies on homodyning light
resonantly Rayleigh scattered from a quantum dot transition with the excitation
laser and phase sensitive lock-in detection. This offers both static and
transient field detection ability with high bandwidth operation and near unity
quantum efficiency. Our theoretical estimation of the static field sensitivity
for typical parameters, 0.5 V/m/ \surd Hz, compares favorably to the
theoretical limit for single electron transistor-based electrometers. The
sensitivity level of 5 V/m/ \surd Hz we report in this work, which corresponds
to 6.4 * 10-6 e/ \surd Hz at a distance of 12 nm, is worse than this
theoretical estimate, yet higher than any other result attained at 4.2 K or
higher operation temperature
Theory of phaselock techniques as applied to aerospace transponders
Phaselock techniques as applied to aerospace transponder
Phase Locked Loop Test Methodology
Phase locked loops are incorporated into almost every large-scale mixed signal and digital system on chip (SOC). Various types of PLL architectures exist including fully analogue, fully digital, semi-digital, and software based. Currently the most commonly used PLL architecture for SOC environments and chipset applications is the Charge-Pump (CP) semi-digital type. This architecture is commonly used for clock synthesis applications, such as the supply of a high frequency on-chip clock, which is derived from a low frequency board level clock. In addition, CP-PLL architectures are now frequently used for demanding RF (Radio Frequency) synthesis, and data synchronization applications. On chip system blocks that rely on correct PLL operation may include third party IP cores, ADCs, DACs and user defined logic (UDL). Basically, any on-chip function that requires a stable clock will be reliant on correct PLL operation. As a direct consequence it is essential that the PLL function is reliably verified during both the design and debug phase and through production testing. This chapter focuses on test approaches related to embedded CP-PLLs used for the purpose of clock generation for SOC. However, methods discussed will generally apply to CP-PLLs used for other applications
Development and performance of pulse-width-modulated static inverter and converter modules
Pulse-width-modulated inverter and converter modules are being developed for modular aerospace electrical power systems. The modules, rate 2.5 kilowatts per module and 10-minute - 150-percent overload, operate from 56 volts dc. The converter module provides two output voltages: a nominal link voltage of 200 volts dc when used with the inverter, and 150 volts dc to a load bus when used separately. The inverter module output is 400-hertz, sinusoidal, three-phase, 120/208 volts. Tests of breadboard models with standard parts and integrated circuits show rated power efficiencies of 71.4 and 85.1 percent and voltage regulation of 5 and 3.1 percent for inverter and converter modules, respectively. Sine-wave output distortion is 0.74 percent
Electronic equipment, systems, and techniques: A compilation
Electronic circuits with specialized computer applications and control circuits are presented. Patent information is included
Distributed control of a fault tolerant modular multilevel inverter for direct-drive wind turbine grid interfacing
Modular generator and converter topologies are being pursued for large offshore wind turbines to achieve fault tolerance and high reliability. A centralized controller presents a single critical point of failure which has prevented a truly modular and fault tolerant system from being obtained. This study analyses the inverter circuit control requirements during normal operation and grid fault ride-through, and proposes a distributed controller design to allow inverter modules to operate independently of each other. All the modules independently estimate the grid voltage magnitude and position, and the modules are synchronised together over a CAN bus. The CAN bus is also used to interleave the PWM switching of the modules and synchronise the ADC sampling. The controller structure and algorithms are tested by laboratory experiments with respect to normal operation, initial synchronization to the grid, module fault tolerance and grid fault ride-through
Distinct roles for inhibition in spatial and temporal tuning of local edge detectors in the rabbit retina.
This paper examines the role of inhibition in generating the receptive-field properties of local edge detector (LED) ganglion cells in the rabbit retina. We confirm that the feed-forward inhibition is largely glycinergic but, contrary to a recent report, our data demonstrate that the glycinergic inhibition contributes to temporal tuning for the OFF and ON inputs to the LEDs by delaying the onset of spiking; this delay was more pronounced for the ON inputs (∼ 340 ms) than the OFF inputs (∼ 12 ms). Blocking glycinergic transmission reduced the delay to spike onset and increased the responses to flickering stimuli at high frequencies. Analysis of the synaptic conductances indicates that glycinergic amacrine cells affect temporal tuning through both postsynaptic inhibition of the LEDs and presynaptic modulation of the bipolar cells that drive the LEDs. The results also confirm that presynaptic GABAergic transmission contributes significantly to the concentric surround antagonism in LEDs; however, unlike presumed LEDs in the mouse retina, the surround is only partly generated by spiking amacrine cells
Conical-scan tracking with the 64-m-diameter antenna at goldstone
The theory and experimental work which demonstrated the feasibility of conical-scan tracking with a 64 m diameter paraboloid antenna is documented. The purpose of this scheme is to actively track spacecraft and radio sources continuously with an accuracy superior to that obtained by manual correction of the computer driven pointing. The conical-scan implementation gives increased tracking accuracy with X-band spacecraft signals, as demonstrated in the Mariner Venus/Mercury 1973 mission. Also, the high accuracy and ease of measurement with conical-scan tracking allow evaluation of systematic and random antenna tracking errors
An Experimental Facility for the Study of Capillary Instability of Liquid Jets
An overview of the instability of laminar Newtonian liquid jets in air is given, and the experimental procedures used by previous investigators are described. It is shown that empirical data are still needed for design purposes. For a systematic improvement of existing mathematical models through experimental data, a facility is designed, constructed, and tested for measuring the breakup length of jets and the size distribution of the drops. It consists of a flow system, an electro-optical detector and a signal conditioner. The performance of the electro-optical detector is shown to be good. The output signal from the electronics is a pulse train that corresponds to the train of drops passing through the detector. Anomalous doublet and triplet pulses in the pulse train are studied. For small nozzle, the anomalous pulses are attributed to large drops and/or small satellite drops passing through the detector simultaneously. For large nozzle, the anomalous pulses may come either from two partially overlapping drops or from a single drop with one or more waists
- …