Cyber-resilient Automatic Generation Control for Systems of AC Microgrids

In this paper we propose a co-design of the secondary frequency regulation in systems of AC microgrids and its cyber securty solutions. We term the secondary frequency regulator a Micro-Automatic Generation Control (Micro-AGC) for highlighting its same functionality as the AGC in bulk power systems. We identify sensory challenges and cyber threats facing the Micro-AGC. To address the sensory challenges, we introduce a new microgrid model by exploiting the rank-one deficiency property of microgrid dynamics. This model is used to pose an optimal Micro-AGC control problem that is easily implemented, because it does not require fast frequency measurements. An end-to-end cyber security solution to the False Data Injection (FDI) attack detection and mitigation is developed for the proposed Micro-AGC. The front-end barrier of applying off-the-shelf algorithms for cyber attack detection is removed by introducing a data-driven modeling approach. Finally, we propose an observer-based corrective control for an islanded microgrid and a collaborative mitigation schemes in systems of AC microgrids. We demonstrate a collaborative role of systems of microgrids during cyber attacks. The performance of the proposed cyber-resilient Micro-AGC is tested in a system of two networked microgrids.Comment: The manuscript has been accepted by IEEE Transactions on Smart Gri

A Review on Application of Artificial Intelligence Techniques in Microgrids

A microgrid can be formed by the integration of different components such as loads, renewable/conventional units, and energy storage systems in a local area. Microgrids with the advantages of being flexible, environmentally friendly, and self-sufficient can improve the power system performance metrics such as resiliency and reliability. However, design and implementation of microgrids are always faced with different challenges considering the uncertainties associated with loads and renewable energy resources (RERs), sudden load variations, energy management of several energy resources, etc. Therefore, it is required to employ such rapid and accurate methods, as artificial intelligence (AI) techniques, to address these challenges and improve the MG's efficiency, stability, security, and reliability. Utilization of AI helps to develop systems as intelligent as humans to learn, decide, and solve problems. This paper presents a review on different applications of AI-based techniques in microgrids such as energy management, load and generation forecasting, protection, power electronics control, and cyber security. Different AI tasks such as regression and classification in microgrids are discussed using methods including machine learning, artificial neural networks, fuzzy logic, support vector machines, etc. The advantages, limitation, and future trends of AI applications in microgrids are discussed.©2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed

Exploring Cyber Security Issues and Solutions for Various Components of DC Microgrid System

Nowadays, considering the growing demand for the DC loads and simplified interface with renewable power generation sources, DC microgrids could be cost effective solution for the power supply in small scale area. the supervisory control and data acquisition (SCADA) system maintain the bidirectional power communication through the internet connectivity with the microgrid. However, this intelligent and interactive feature may pose a cyber-security threat to the power grid. this work aims to exploring cyber-security issues and their solutions for the DC microgrid system. To mitigate the adverse effects of various cyber-attacks such as the False Data Injection (FDI) attack, Distributed Denial of Service (DDoS) attack etc., two new techniques based on non-linear and proportional-integral (PI) controllers have been proposed. Simulation results obtained from MATLAB/Simulink software demonstrate the effectiveness of the proposed methods in mitigating the adverse effects of cyber-attacks on the DCMG system performance

On addressing the security and stability issues due to false data injection attacks in DC microgrids an adaptive observer approach

© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksThis paper proposes an observer-based methodology to detect and mitigate false data injection attacks in collaborative DC microgrids. The ability of observers to effectively detect such attacks is complicated by the presence of unknown non-linear constant power loads. This work determines that, in the presence of unknown constant power loads, the considered attack detection and mitigation problem involves non linearities, locally unobservable states, unknown parameters, uncertainty and noise. Taking into account these limitations, a distributed non linear adaptive observer is proposed to overcome these limitations and solve the concerned observation problem. The necessary conditions for the stability of the distributed scheme are found out. Moreover, numerical simulations are performed and then validated in a real experimental prototype, where communication delay, uncertainty and noise are considered.Peer ReviewedPostprint (author's final draft

Microgrid Control and Protection: Stability and Security

When the microgrid disconnects from the main grid in response to, say, upstream disturbance or voltage fluctuation and goes to islanding mode, both voltage and frequency at all locations in the microgrid have to be regulated to nominal values in a short amount of time before the operation of protective relays. Motivated by this, we studied the application of intelligent pinning of distributed cooperative secondary control of distributed generators in islanded microgrid operation in a power system. In the first part, the problem of single and multi-pinning of distributed cooperative secondary control of DGs in a microgrid is formulated. It is shown that the intelligent selection of a pinning set based on the number of its connections and distance of leader DG/DGs from the rest of the network, i.e., degree of connectivity, strengthens microgrid voltage and frequency regulation performance both in transient and steady state. The proposed control strategy and algorithm are validated by simulation in MATLAB/SIMULINK using different microgrid topologies. It is shown that it is much easier to stabilize the microgrid voltage and frequency in islanding mode operation by specifically placing the pinning node on the DGs with high degrees of connectivity than by randomly placing pinning nodes into the network. In all of these research study cases, DGs are only required to communicate with their neighboring units which facilitates the distributed control strategy. Historically, the models for primary control are developed for power grids with centralized power generation, in which the transmission lines are assumed to be primarily inductive. However, for distributed power generation, this assumption does not hold since the network has significant resistive impedance as well. Hence, it is of utmost importance to generalize the droop equations, i.e., primary control, to arrive at a proper model for microgrid systems. Motivated by this, we proposed the secondary adaptive voltage and frequency control of distributed generators for low and medium voltage microgrid in autonomous mode to overcome the drawback of existing classical droop based control techniques. Our proposed secondary control strategy is adaptive with line parameters and can be applied to all types of microgrids to address the simultaneous impacts of active and reactive power on the microgrids voltage and frequency. Also, since the parameters in the network model are unknown or uncertain, the second part of our research studies adaptive distributed estimation/compensation. It is shown that this is an effective method to robustly regulate the microgrid variables to their desired values. The security of power systems against malicious cyberphysical data attacks is the third topic of this dissertation. The adversary always attempts to manipulate the information structure of the power system and inject malicious data to deviate state variables while evading the existing detection techniques based on residual test. The solutions proposed in the literature are capable of immunizing the power system against false data injection but they might be too costly and physically not practical in the expansive distribution network. To this end, we define an algebraic condition for trustworthy power system to evade malicious data injection. The proposed protection scheme secures the power system by deterministically reconfiguring the information structure and corresponding residual test. More importantly, it does not require any physical effort in either microgrid or network level. The identification scheme of finding meters being attacked is proposed as well. Eventually, a well-known IEEE 30-bus system is adopted to demonstrate the effectiveness of the proposed schemes