COMMUNICATION IN SMART GRIDS USING LTE

The world today is focusing on the enhancement of efficient use of energy and it has compelled the energy industry to research and seek for measures for increasing energy efficiency. Out of various fields related to energy, Smart Grid has emerged itself as one of the effective contributor to fulfill the approach of efficient use of energy. The term smart grid has been evolved from power grid where the energy is generated, distributed and finally consumed by a consumer. The smart form of this power grid is actually smart grid which facilitates smart way of communication of smart devices between grids, so that the effective mode of controlling and monitoring can be achieved. In order to achieve this, the devices should be smart enough so that they can be interoperable and remotely accessed. For the smart devices to communicate in real time so that controlling and remote access becomes possible, it demands an advanced communicating medium. LTE is one of the most challenging, famous and widely adopted communication technology that meets the requirement imposed by broadband wireless mobile communications. Early tests, evaluations and their pre-commercial deployments have proved that they fulfil all the requirements like high-data-rate, low latency and optimized system that advanced communication demands. Thus, this paper focuses on the evaluation of integration of LTE in Smart Grids so that automation in Smart Grids can be achieved.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Wide-Area Time-Synchronized Closed-Loop Control of Power Systems And Decentralized Active Distribution Networks

The rapidly expanding power system grid infrastructure and the need to reduce the occurrence of major blackouts and prevention or hardening of systems against cyber-attacks, have led to increased interest in the improved resilience of the electrical grid. Distributed and decentralized control have been widely applied to computer science research. However, for power system applications, the real-time application of decentralized and distributed control algorithms introduce several challenges. In this dissertation, new algorithms and methods for decentralized control, protection and energy management of Wide Area Monitoring, Protection and Control (WAMPAC) and the Active Distribution Network (ADN) are developed to improve the resiliency of the power system. To evaluate the findings of this dissertation, a laboratory-scale integrated Wide WAMPAC and ADN control platform was designed and implemented. The developed platform consists of phasor measurement units (PMU), intelligent electronic devices (IED) and programmable logic controllers (PLC). On top of the designed hardware control platform, a multi-agent cyber-physical interoperability viii framework was developed for real-time verification of the developed decentralized and distributed algorithms using local wireless and Internet-based cloud communication. A novel real-time multiagent system interoperability testbed was developed to enable utility independent private microgrids standardized interoperability framework and define behavioral models for expandability and plug-and-play operation. The state-of-theart power system multiagent framework is improved by providing specific attributes and a deliberative behavior modeling capability. The proposed multi-agent framework is validated in a laboratory based testbed involving developed intelligent electronic device prototypes and actual microgrid setups. Experimental results are demonstrated for both decentralized and distributed control approaches. A new adaptive real-time protection and remedial action scheme (RAS) method using agent-based distributed communication was developed for autonomous hybrid AC/DC microgrids to increase resiliency and continuous operability after fault conditions. Unlike the conventional consecutive time delay-based overcurrent protection schemes, the developed technique defines a selectivity mechanism considering the RAS of the microgrid after fault instant based on feeder characteristics and the location of the IEDs. The experimental results showed a significant improvement in terms of resiliency of microgrids through protection using agent-based distributed communication

Plant descriptions for engineering tool interoperability

The emergence and deployment of connected devices in many domains of application (e.g. industrial production, buildings and facilities, urban environment, etc.) have resulted in the need to achieve integration of multiple and more complex systems. This new environment is stressing the intrinsic limits imposed by monolithic standards, data models and integration methods that focus on specific domains of application, types of systems, or specific aspects of a system. This paper describes the Plant Description Service developed as part of the Arrowhead Interoperability framework (EU ECSEL funded project). The manuscript contains a description of the abstract system descriptive model based on which the Plant Description service was implemented, and describes how the service can be used to achieve integration of several industry standards and data models. Case studies are provided that illustrates how the service was practically implemented to support engineering scenarios in the domain of industrial production. The paper concludes with a critical review of the approach and suggestion for future work and developments

Open research issues on multi-models for complex technological systems

Abstract -We are going to report here about state of the art works on multi-models for complex technological systems both from the theoretical and practical point of view. A variety of algorithmic approaches (k-mean, dss, etc.) and applicative domains (wind farms, neurological diseases, etc.) are reported to illustrate the extension of the research area

Scenarios for the development of smart grids in the UK: literature review

Smart grids are expected to play a central role in any transition to a low-carbon energy future, and much research is currently underway on practically every area of smart grids. However, it is evident that even basic aspects such as theoretical and operational definitions, are yet to be agreed upon and be clearly defined. Some aspects (efficient management of supply, including intermittent supply, two-way communication between the producer and user of electricity, use of IT technology to respond to and manage demand, and ensuring safe and secure electricity distribution) are more commonly accepted than others (such as smart meters) in defining what comprises a smart grid. It is clear that smart grid developments enjoy political and financial support both at UK and EU levels, and from the majority of related industries. The reasons for this vary and include the hope that smart grids will facilitate the achievement of carbon reduction targets, create new employment opportunities, and reduce costs relevant to energy generation (fewer power stations) and distribution (fewer losses and better stability). However, smart grid development depends on additional factors, beyond the energy industry. These relate to issues of public acceptability of relevant technologies and associated risks (e.g. data safety, privacy, cyber security), pricing, competition, and regulation; implying the involvement of a wide range of players such as the industry, regulators and consumers. The above constitute a complex set of variables and actors, and interactions between them. In order to best explore ways of possible deployment of smart grids, the use of scenarios is most adequate, as they can incorporate several parameters and variables into a coherent storyline. Scenarios have been previously used in the context of smart grids, but have traditionally focused on factors such as economic growth or policy evolution. Important additional socio-technical aspects of smart grids emerge from the literature review in this report and therefore need to be incorporated in our scenarios. These can be grouped into four (interlinked) main categories: supply side aspects, demand side aspects, policy and regulation, and technical aspects.

Cellular networks for smart grid communication

The next-generation electric power system, known as smart grid, relies on a robust and reliable underlying communication infrastructure to improve the efficiency of electricity distribution. Cellular networks, e.g., LTE/LTE-A systems, appear as a promising technology to facilitate the smart grid evolution. Their inherent performance characteristics and well-established ecosystem could potentially unlock unprecedented use cases, enabling real-time and autonomous distribution grid operations. However, cellular technology was not originally intended for smart grid communication, associated with highly-reliable message exchange and massive device connectivity requirements. The fundamental differences between smart grid and human-type communication challenge the classical design of cellular networks and introduce important research questions that have not been sufficiently addressed so far. Motivated by these challenges, this doctoral thesis investigates novel radio access network (RAN) design principles and performance analysis for the seamless integration of smart grid traffic in future cellular networks. Specifically, we focus on addressing the fundamental RAN problems of network scalability in massive smart grid deployments and radio resource management for smart grid and human-type traffic. The main objective of the thesis lies on the design, analysis and performance evaluation of RAN mechanisms that would render cellular networks the key enabler for emerging smart grid applications. The first part of the thesis addresses the radio access limitations in LTE-based networks for reliable and scalable smart grid communication. We first identify the congestion problem in LTE random access that arises in large-scale smart grid deployments. To overcome this, a novel random access mechanism is proposed that can efficiently support real-time distribution automation services with negligible impact on the background traffic. Motivated by the stringent reliability requirements of various smart grid operations, we then develop an analytical model of the LTE random access procedure that allows us to assess the performance of event-based monitoring traffic under various load conditions and network configurations. We further extend our analysis to include the relation between the cell size and the availability of orthogonal random access resources and we identify an additional challenge for reliable smart grid connectivity. To this end, we devise an interference- and load-aware cell planning mechanism that enhances reliability in substation automation services. Finally, we couple the problem of state estimation in wide-area monitoring systems with the reliability challenges in information acquisition. Using our developed analytical framework, we quantify the impact of imperfect communication reliability in the state estimation accuracy and we provide useful insights for the design of reliability-aware state estimators. The second part of the thesis builds on the previous one and focuses on the RAN problem of resource scheduling and sharing for smart grid and human-type traffic. We introduce a novel scheduler that achieves low latency for distribution automation traffic while resource allocation is performed in a way that keeps the degradation of cellular users at a minimum level. In addition, we investigate the benefits of Device-to-Device (D2D) transmission mode for event-based message exchange in substation automation scenarios. We design a joint mode selection and resource allocation mechanism which results in higher data rates with respect to the conventional transmission mode via the base station. An orthogonal resource partition scheme between cellular and D2D links is further proposed to prevent the underutilization of the scarce cellular spectrum. The research findings of this thesis aim to deliver novel solutions to important RAN performance issues that arise when cellular networks support smart grid communication.Las redes celulares, p.e., los sistemas LTE/LTE-A, aparecen como una tecnología prometedora para facilitar la evolución de la próxima generación del sistema eléctrico de potencia, conocido como smart grid (SG). Sin embargo, la tecnología celular no fue pensada originalmente para las comunicaciones en la SG, asociadas con el intercambio fiable de mensajes y con requisitos de conectividad de un número masivo de dispositivos. Las diferencias fundamentales entre las comunicaciones en la SG y la comunicación de tipo humano desafían el diseño clásico de las redes celulares e introducen importantes cuestiones de investigación que hasta ahora no se han abordado suficientemente. Motivada por estos retos, esta tesis doctoral investiga los principios de diseño y analiza el rendimiento de una nueva red de acceso radio (RAN) que permita una integración perfecta del tráfico de la SG en las redes celulares futuras. Nos centramos en los problemas fundamentales de escalabilidad de la RAN en despliegues de SG masivos, y en la gestión de los recursos radio para la integración del tráfico de la SG con el tráfico de tipo humano. El objetivo principal de la tesis consiste en el diseño, el análisis y la evaluación del rendimiento de los mecanismos de las RAN que convertirán a las redes celulares en el elemento clave para las aplicaciones emergentes de las SGs. La primera parte de la tesis aborda las limitaciones del acceso radio en redes LTE para la comunicación fiable y escalable en SGs. En primer lugar, identificamos el problema de congestión en el acceso aleatorio de LTE que aparece en los despliegues de SGs a gran escala. Para superar este problema, se propone un nuevo mecanismo de acceso aleatorio que permite soportar de forma eficiente los servicios de automatización de la distribución eléctrica en tiempo real, con un impacto insignificante en el tráfico de fondo. Motivados por los estrictos requisitos de fiabilidad de las diversas operaciones en la SG, desarrollamos un modelo analítico del procedimiento de acceso aleatorio de LTE que nos permite evaluar el rendimiento del tráfico de monitorización de la red eléctrica basado en eventos bajo diversas condiciones de carga y configuraciones de red. Además, ampliamos nuestro análisis para incluir la relación entre el tamaño de celda y la disponibilidad de recursos de acceso aleatorio ortogonales, e identificamos un reto adicional para la conectividad fiable en la SG. Con este fin, diseñamos un mecanismo de planificación celular que tiene en cuenta las interferencias y la carga de la red, y que mejora la fiabilidad en los servicios de automatización de las subestaciones eléctricas. Finalmente, combinamos el problema de la estimación de estado en sistemas de monitorización de redes eléctricas de área amplia con los retos de fiabilidad en la adquisición de la información. Utilizando el modelo analítico desarrollado, cuantificamos el impacto de la baja fiabilidad en las comunicaciones sobre la precisión de la estimación de estado. La segunda parte de la tesis se centra en el problema de scheduling y compartición de recursos en la RAN para el tráfico de SG y el tráfico de tipo humano. Presentamos un nuevo scheduler que proporciona baja latencia para el tráfico de automatización de la distribución eléctrica, mientras que la asignación de recursos se realiza de un modo que mantiene la degradación de los usuarios celulares en un nivel mínimo. Además, investigamos los beneficios del modo de transmisión Device-to-Device (D2D) en el intercambio de mensajes basados en eventos en escenarios de automatización de subestaciones eléctricas. Diseñamos un mecanismo conjunto de asignación de recursos y selección de modo que da como resultado tasas de datos más elevadas con respecto al modo de transmisión convencional a través de la estación base. Finalmente, se propone un esquema de partición de recursos ortogonales entre enlaces celulares y D2Postprint (published version

Scenarios for the development of smart grids in the UK : literature review

No abstractUK Energy Research Centr

Scenarios for the Development of Smart Grids in the UK: Literature Review

This Working Paper reviews the existing literature on the socio-technical aspects of smart grid development. This work was undertaken as part of the Scenarios for the Development of Smart Grids in the UK project

Cyber-Security Solutions for Ensuring Smart Grid Distribution Automation Functions

The future generation of the electrical network is known as the smart grid. The distribution domain of the smart grid intelligently supplies electricity to the end-users with the aid of the decentralized Distribution Automation (DA) in which intelligent control functions are distributed and accomplished via real-time communication between the DA components. Internet-based communication via the open protocols is the latest trend for decentralized DA communication. Internet communication has many benefits, but it exposes the critical infrastructure’s data to cyber-security threats. Security attacks may not only make DA services unreachable but may also result in undesirable physical consequences and serious damage to the distribution network environment. Therefore, it is compulsory to protect DA communication against such attacks. There is no single model for securing DA communication. In fact, the security level depends on several factors such as application requirements, communication media, and, of course, the cost.There are several smart grid security frameworks and standards, which are under development by different organizations. However, smart grid cyber-security field has not yet reached full maturity and, it is still in the early phase of its progress. Security protocols in IT and computer networks can be utilized to secure DA communication because industrial ICT standards have been designed in accordance with Open Systems Interconnection model. Furthermore, state-of-the-art DA concepts such as Active distribution network tend to integrate processing data into IT systems.This dissertation addresses cyber-security issues in the following DA functions: substation automation, feeder automation, Logic Selectivity, customer automation and Smart Metering. Real-time simulation of the distribution network along with actual automation and data networking devices are used to create hardware-in-the-loop simulation, and experiment the mentioned DA functions with the Internet communication. This communication is secured by proposing the following cyber-security solutions.This dissertation proposes security solutions for substation automation by developing IEC61850-TLS proxy and adding OPen Connectivity Unified Architecture (OPC UA) Wrapper to Station Gateway. Secured messages by Transport Layer Security (TLS) and OPC UA security are created for protecting substation local and remote communications. Data availability is main concern that is solved by designing redundant networks.The dissertation also proposes cyber-security solutions for feeder automation and Logic Selectivity. In feeder automation, Centralized Protection System (CPS) is proposed as the place for making Decentralized feeder automation decisions. In addition, applying IP security (IPsec) in Tunnel mode is proposed to establish a secure communication path for feeder automation messages. In Logic Selectivity, Generic Object Oriented Substation Events (GOOSE) are exchanged between the substations. First, Logic Selectivity functional characteristics are analyzed. Then, Layer 2 Tunneling over IPsec in Transport mode is proposed to create a secure communication path for exchanging GOOSE over the Internet. Next, communication impact on Logic Selectivity performance is investigated by measuring the jitter and latency in the GOOSE communication. Lastly, reliability improvement by Logic Selectivity is evaluated by calculating reliability indices.Customer automation is the additional extension to the smart grid DA. This dissertation proposes an integration solution for the heterogeneous communication parties (TCP/IP and Controller Area Network) in Home Area Network. The developed solution applies Secure Socket Layer in order to create secured messages.The dissertation also proposes Secondary Substation Automation Unit (SSAU) for realtime communication of low voltage data to metering database. Point-to-Point Tunneling Protocol is proposed to create a secure communication path for Smart Metering data.The security analysis shows that the proposed security solutions provide the security requirements (Confidentiality, Integrity and Availability) for DA communication. Thus, communication is protected against security attacks and DA functions are ensured. In addition, CPS and SSAU are proposed to distribute intelligence over the substations level

Fault Location, Isolation and Network Restoration as a Self-Healing function

One of the main emphasis of the smart grid is the interaction of power supply and power customer in order to provide a reliable supply of power as well as to improve the flexibility of the network. Along with this, the increased energy demand, coupled with strict regulations on the quality and reliability of supply intensifies the pressure on distribution network operators to maintain the integrity of the network in its faultless operation mode. Additionally, regardless of the huge investments already made in replacing aging infrastructure and translating “the old-fashioned grid” in a “Smart Grid” to minimize the probability for equipment failure, the chances of failure cannot be completely eliminated. In accordance, in the event of faults in the network, apart from the high penalty costs in which network operators may incur, certain safety factors must be taken into consideration for particular customers (for example, hospitals). In view of that, there is a necessity to minimize the impact on customers without supply and maintain outages times as brief as possible. Within this scenario comes the concept of self-healing grid as one of the key-technologies in the smart grid environment which is partly due to the rapid development of distribution automation. Self-healing refers to the capacity of the smart grid to restore efficiently and automatically power after an outage. Self-healing main goals comprise supply maximum load affected by the fault, take the shortest time period possible for restoration of the load, minimizing the number of switching operations and keeping the network capacity within its operating limits. This research has explored insights into the smart grid in terms of the self-healing functionality within the distribution network with main emphasis on self-healing implementation types and its applicability. Initially a detailed review of the conception of the smart grid in order to integrate the self-healing and thus fault location, isolation and service restoration capabilities was conducted. This was complemented with a detailed discussion about the electricity distribution system automatic fault management in order to create a framework around which the aim of the research is based. Finally the self-healing problem coupled with current practical implementation cases was addressed with the objective of exploring the means of improvement and evolution in the automation level in the distribution network using Fault Location Isolation and Service Restoration (FLISR) applicability as a medium