7,683 research outputs found
A Simple Cooperative Diversity Method Based on Network Path Selection
Cooperative diversity has been recently proposed as a way to form virtual
antenna arrays that provide dramatic gains in slow fading wireless
environments. However most of the proposed solutions require distributed
space-time coding algorithms, the careful design of which is left for future
investigation if there is more than one cooperative relay. We propose a novel
scheme, that alleviates these problems and provides diversity gains on the
order of the number of relays in the network. Our scheme first selects the best
relay from a set of M available relays and then uses this best relay for
cooperation between the source and the destination. We develop and analyze a
distributed method to select the best relay that requires no topology
information and is based on local measurements of the instantaneous channel
conditions. This method also requires no explicit communication among the
relays. The success (or failure) to select the best available path depends on
the statistics of the wireless channel, and a methodology to evaluate
performance for any kind of wireless channel statistics, is provided.
Information theoretic analysis of outage probability shows that our scheme
achieves the same diversity-multiplexing tradeoff as achieved by more complex
protocols, where coordination and distributed space-time coding for M nodes is
required, such as those proposed in [7]. The simplicity of the technique,
allows for immediate implementation in existing radio hardware and its adoption
could provide for improved flexibility, reliability and efficiency in future 4G
wireless systems.Comment: To appear, IEEE JSAC, special issue on 4
Cross-Sender Bit-Mixing Coding
Scheduling to avoid packet collisions is a long-standing challenge in
networking, and has become even trickier in wireless networks with multiple
senders and multiple receivers. In fact, researchers have proved that even {\em
perfect} scheduling can only achieve . Here
is the number of nodes in the network, and is the {\em medium
utilization rate}. Ideally, one would hope to achieve ,
while avoiding all the complexities in scheduling. To this end, this paper
proposes {\em cross-sender bit-mixing coding} ({\em BMC}), which does not rely
on scheduling. Instead, users transmit simultaneously on suitably-chosen slots,
and the amount of overlap in different user's slots is controlled via coding.
We prove that in all possible network topologies, using BMC enables us to
achieve . We also prove that the space and time
complexities of BMC encoding/decoding are all low-order polynomials.Comment: Published in the International Conference on Information Processing
in Sensor Networks (IPSN), 201
Distributed Estimation and Control of Algebraic Connectivity over Random Graphs
In this paper we propose a distributed algorithm for the estimation and
control of the connectivity of ad-hoc networks in the presence of a random
topology. First, given a generic random graph, we introduce a novel stochastic
power iteration method that allows each node to estimate and track the
algebraic connectivity of the underlying expected graph. Using results from
stochastic approximation theory, we prove that the proposed method converges
almost surely (a.s.) to the desired value of connectivity even in the presence
of imperfect communication scenarios. The estimation strategy is then used as a
basic tool to adapt the power transmitted by each node of a wireless network,
in order to maximize the network connectivity in the presence of realistic
Medium Access Control (MAC) protocols or simply to drive the connectivity
toward a desired target value. Numerical results corroborate our theoretical
findings, thus illustrating the main features of the algorithm and its
robustness to fluctuations of the network graph due to the presence of random
link failures.Comment: To appear in IEEE Transactions on Signal Processin
Towards a Collision-Free WLAN: Dynamic Parameter Adjustment in CSMA/E2CA
Carrier Sense Multiple Access with Enhanced Collision Avoidance (CSMA/ECA) is
a distributed MAC protocol that allows collision-free access to the medium in
WLAN. The only difference between CSMA/ECA and the well-known CSMA/CA is that
the former uses a deterministic backoff after successful transmissions.
Collision-free operation is reached after a transient state during which some
collisions may occur. This article shows that the duration of the transient
state can be shortened by appropriately setting the contention parameters.
Standard absorbing Markov Chain theory can be used to describe the behaviour of
the system in the transient state and to predict the expected number of slots
to reach the collision-free operation.
The article also introduces CSMA/E2CA, in which a deterministic backoff is
used two consecutive times after a successful transmission. CSMA/E2CA converges
quicker to collision-free operation and delivers higher performance than
CSMA/CA in harsh wireless scenarios with high frame error rates.
To achieve collision-free operations when the number of contenders is large,
it may be necessary to dynamically adjust the contention parameter. The last
part of the article suggests an approach for such parameter adjustment which is
validated by simulation results
- …