Accuracy-guaranteed bit-width optimization

Published versio

Accuracy-Guaranteed Fixed-Point Optimization in Hardware Synthesis and Processor Customization

RÉSUMÉ De nos jours, le calcul avec des nombres fractionnaires est essentiel dans une vaste gamme d’applications de traitement de signal et d’image. Pour le calcul numérique, un nombre fractionnaire peut être représenté à l’aide de l’arithmétique en virgule fixe ou en virgule flottante. L’arithmétique en virgule fixe est largement considérée préférable à celle en virgule flottante pour les architectures matérielles dédiées en raison de sa plus faible complexité d’implémentation. Dans la mise en œuvre du matériel, la largeur de mot attribuée à différents signaux a un impact significatif sur des métriques telles que les ressources (transistors), la vitesse et la consommation d'énergie. L'optimisation de longueur de mot (WLO) en virgule fixe est un domaine de recherche bien connu qui vise à optimiser les chemins de données par l'ajustement des longueurs de mots attribuées aux signaux. Un nombre en virgule fixe est composé d’une partie entière et d’une partie fractionnaire. Il y a une limite inférieure au nombre de bits alloués à la partie entière, de façon à prévenir les débordements pour chaque signal. Cette limite dépend de la gamme de valeurs que peut prendre le signal. Le nombre de bits de la partie fractionnaire, quant à lui, détermine la taille de l'erreur de précision finie qui est introduite dans les calculs. Il existe un compromis entre la précision et l'efficacité du matériel dans la sélection du nombre de bits de la partie fractionnaire. Le processus d'attribution du nombre de bits de la partie fractionnaire comporte deux procédures importantes: la modélisation de l'erreur de quantification et la sélection de la taille de la partie fractionnaire. Les travaux existants sur la WLO ont porté sur des circuits spécialisés comme plate-forme cible. Dans cette thèse, nous introduisons de nouvelles méthodologies, techniques et algorithmes pour améliorer l’implémentation de calculs en virgule fixe dans des circuits et processeurs spécialisés. La thèse propose une approche améliorée de modélisation d’erreur, basée sur l'arithmétique affine, qui aborde certains problèmes des méthodes existantes et améliore leur précision. La thèse introduit également une technique d'accélération et deux algorithmes semi-analytiques pour la sélection de la largeur de la partie fractionnaire pour la conception de circuits spécialisés. Alors que le premier algorithme suit une stratégie de recherche progressive, le second utilise une méthode de recherche en forme d'arbre pour l'optimisation de la largeur fractionnaire. Les algorithmes offrent deux options de compromis entre la complexité de calcul et le coût résultant. Le premier algorithme a une complexité polynomiale et obtient des résultats comparables avec des approches heuristiques existantes. Le second algorithme a une complexité exponentielle, mais il donne des résultats quasi-optimaux par rapport à une recherche exhaustive. Cette thèse propose également une méthode pour combiner l'optimisation de la longueur des mots dans un contexte de conception de processeurs configurables. La largeur et la profondeur des blocs de registres et l'architecture des unités fonctionnelles sont les principaux objectifs ciblés par cette optimisation. Un nouvel algorithme d'optimisation a été développé pour trouver la meilleure combinaison de longueurs de mots et d'autres paramètres configurables dans la méthode proposée. Les exigences de précision, définies comme l'erreur pire cas, doivent être respectées par toute solution. Pour faciliter l'évaluation et la mise en œuvre des solutions retenues, un nouvel environnement de conception de processeur a également été développé. Cet environnement, qui est appelé PolyCuSP, supporte une large gamme de paramètres, y compris ceux qui sont nécessaires pour évaluer les solutions proposées par l'algorithme d'optimisation. L’environnement PolyCuSP soutient l’exploration rapide de l'espace de solution et la capacité de modéliser différents jeux d'instructions pour permettre des comparaisons efficaces.----------ABSTRACT Fixed-point arithmetic is broadly preferred to floating-point in hardware development due to the reduced hardware complexity of fixed-point circuits. In hardware implementation, the bitwidth allocated to the data elements has significant impact on efficiency metrics for the circuits including area usage, speed and power consumption. Fixed-point word-length optimization (WLO) is a well-known research area. It aims to optimize fixed-point computational circuits through the adjustment of the allocated bitwidths of their internal and output signals. A fixed-point number is composed of an integer part and a fractional part. There is a minimum number of bits for the integer part that guarantees overflow and underflow avoidance in each signal. This value depends on the range of values that the signal may take. The fractional word-length determines the amount of finite-precision error that is introduced in the computations. There is a trade-off between accuracy and hardware cost in fractional word-length selection. The process of allocating the fractional word-length requires two important procedures: finite-precision error modeling and fractional word-length selection. Existing works on WLO have focused on hardwired circuits as the target implementation platform. In this thesis, we introduce new methodologies, techniques and algorithms to improve the hardware realization of fixed-point computations in hardwired circuits and customizable processors. The thesis proposes an enhanced error modeling approach based on affine arithmetic that addresses some shortcomings of the existing methods and improves their accuracy. The thesis also introduces an acceleration technique and two semi-analytical fractional bitwidth selection algorithms for WLO in hardwired circuit design. While the first algorithm follows a progressive search strategy, the second one uses a tree-shaped search method for fractional width optimization. The algorithms offer two different time-complexity/cost efficiency trade-off options. The first algorithm has polynomial complexity and achieves comparable results with existing heuristic approaches. The second algorithm has exponential complexity but achieves near-optimal results compared to an exhaustive search. The thesis further proposes a method to combine word-length optimization with application-specific processor customization. The supported datatype word-length, the size of register-files and the architecture of the functional units are the main target objectives to be optimized. A new optimization algorithm is developed to find the best combination of word-length and other customizable parameters in the proposed method. Accuracy requirements, defined as the worst-case error bound, are the key consideration that must be met by any solution. To facilitate evaluation and implementation of the selected solutions, a new processor design environment was developed. This environment, which is called PolyCuSP, supports necessary customization flexibility to realize and evaluate the solutions given by the optimization algorithm. PolyCuSP supports rapid design space exploration and capability to model different instruction-set architectures to enable effective compari

Workshop on Verification and Theorem Proving for Continuous Systems (NetCA Workshop 2005)

Oxford, UK, 26 August 200

Precision analysis for hardware acceleration of numerical algorithms

The precision used in an algorithm affects the error and performance of individual computations, the memory usage, and the potential parallelism for a fixed hardware budget. However, when migrating an algorithm onto hardware, the potential improvements that can be obtained by tuning the precision throughout an algorithm to meet a range or error specification are often overlooked; the major reason is that it is hard to choose a number system which can guarantee any such specification can be met. Instead, the problem is mitigated by opting to use IEEE standard double precision arithmetic so as to be ‘no worse’ than a software implementation. However, the flexibility in the number representation is one of the key factors that can be exploited on reconfigurable hardware such as FPGAs, and hence ignoring this potential significantly limits the performance achievable. In order to optimise the performance of hardware reliably, we require a method that can tractably calculate tight bounds for the error or range of any variable within an algorithm, but currently only a handful of methods to calculate such bounds exist, and these either sacrifice tightness or tractability, whilst simulation-based methods cannot guarantee the given error estimate. This thesis presents a new method to calculate these bounds, taking into account both input ranges and finite precision effects, which we show to be, in general, tighter in comparison to existing methods; this in turn can be used to tune the hardware to the algorithm specifications. We demonstrate the use of this software to optimise hardware for various algorithms to accelerate the solution of a system of linear equations, which forms the basis of many problems in engineering and science, and show that significant performance gains can be obtained by using this new approach in conjunction with more traditional hardware optimisations

Application-Specific Number Representation

Reconfigurable devices, such as Field Programmable Gate Arrays (FPGAs), enable application- specific number representations. Well-known number formats include fixed-point, floating- point, logarithmic number system (LNS), and residue number system (RNS). Such different number representations lead to different arithmetic designs and error behaviours, thus produc- ing implementations with different performance, accuracy, and cost. To investigate the design options in number representations, the first part of this thesis presents a platform that enables automated exploration of the number representation design space. The second part of the thesis shows case studies that optimise the designs for area, latency or throughput from the perspective of number representations. Automated design space exploration in the first part addresses the following two major issues: ² Automation requires arithmetic unit generation. This thesis provides optimised arithmetic library generators for logarithmic and residue arithmetic units, which support a wide range of bit widths and achieve significant improvement over previous designs. ² Generation of arithmetic units requires specifying the bit widths for each variable. This thesis describes an automatic bit-width optimisation tool called R-Tool, which combines dynamic and static analysis methods, and supports different number systems (fixed-point, floating-point, and LNS numbers). Putting it all together, the second part explores the effects of application-specific number representation on practical benchmarks, such as radiative Monte Carlo simulation, and seismic imaging computations. Experimental results show that customising the number representations brings benefits to hardware implementations: by selecting a more appropriate number format, we can reduce the area cost by up to 73.5% and improve the throughput by 14.2% to 34.1%; by performing the bit-width optimisation, we can further reduce the area cost by 9.7% to 17.3%. On the performance side, hardware implementations with customised number formats achieve 5 to potentially over 40 times speedup over software implementations

Tools for efficient Deep Learning

In the era of Deep Learning (DL), there is a fast-growing demand for building and deploying Deep Neural Networks (DNNs) on various platforms. This thesis proposes five tools to address the challenges for designing DNNs that are efficient in time, in resources and in power consumption. We first present Aegis and SPGC to address the challenges in improving the memory efficiency of DL training and inference. Aegis makes mixed precision training (MPT) stabler by layer-wise gradient scaling. Empirical experiments show that Aegis can improve MPT accuracy by at most 4\%. SPGC focuses on structured pruning: replacing standard convolution with group convolution (GConv) to avoid irregular sparsity. SPGC formulates GConv pruning as a channel permutation problem and proposes a novel heuristic polynomial-time algorithm. Common DNNs pruned by SPGC have maximally 1\% higher accuracy than prior work. This thesis also addresses the challenges lying in the gap between DNN descriptions and executables by Polygeist for software and POLSCA for hardware. Many novel techniques, e.g. statement splitting and memory partitioning, are explored and used to expand polyhedral optimisation. Polygeist can speed up software execution in sequential and parallel by 2.53 and 9.47 times on Polybench/C. POLSCA achieves 1.5 times speedup over hardware designs directly generated from high-level synthesis on Polybench/C. Moreover, this thesis presents Deacon, a framework that generates FPGA-based DNN accelerators of streaming architectures with advanced pipelining techniques to address the challenges from heterogeneous convolution and residual connections. Deacon provides fine-grained pipelining, graph-level optimisation, and heuristic exploration by graph colouring. Compared with prior designs, Deacon shows resource/power consumption efficiency improvement of 1.2x/3.5x for MobileNets and 1.0x/2.8x for SqueezeNets. All these tools are open source, some of which have already gained public engagement. We believe they can make efficient deep learning applications easier to build and deploy.Open Acces

Mathematics and Digital Signal Processing

Modern computer technology has opened up new opportunities for the development of digital signal processing methods. The applications of digital signal processing have expanded significantly and today include audio and speech processing, sonar, radar, and other sensor array processing, spectral density estimation, statistical signal processing, digital image processing, signal processing for telecommunications, control systems, biomedical engineering, and seismology, among others. This Special Issue is aimed at wide coverage of the problems of digital signal processing, from mathematical modeling to the implementation of problem-oriented systems. The basis of digital signal processing is digital filtering. Wavelet analysis implements multiscale signal processing and is used to solve applied problems of de-noising and compression. Processing of visual information, including image and video processing and pattern recognition, is actively used in robotic systems and industrial processes control today. Improving digital signal processing circuits and developing new signal processing systems can improve the technical characteristics of many digital devices. The development of new methods of artificial intelligence, including artificial neural networks and brain-computer interfaces, opens up new prospects for the creation of smart technology. This Special Issue contains the latest technological developments in mathematics and digital signal processing. The stated results are of interest to researchers in the field of applied mathematics and developers of modern digital signal processing systems