Fault tolerance force for redundant manipulators

Fault tolerant manipulators maintain their trajectory even if their joint/s fails. Assuming that the manipulator is fault tolerant on its trajectory, fault tolerant compliance manipulators provide required force at their end-effector even when a joint fails. To achieve this, the contributions of the faulty joints for the force of the end-effector are required to be mapped into the proper compensating joint torques of the healthy joints to maintain the force. This paper addresses the optimal mapping to minimize the force jump due to a fault, which is the maximum effort to maintain the force when a fault occurs. The paper studies the locked joint fault/s of the redundant manipulators and it relates the force jump at the end-effector to the faults within the joints. Adding on a previous study to maintain the trajectory, in here the objective is to providing fault tolerant force at the end-effector of the redundant manipulators. This optimal mapping with minimum force jump is presented using matrix perturbation model. And the force jump is calculated through this model for single and multiple joints fault. The proposed optimal mapping is used in different fault scenarios for a 5-DOF manipulator; also it is deployed to compensate the force at the end-effector for the 5-DOF manipulator through simulation study and the results are presented

Integration of fault tolerance and hardware redundancy techniques into the design of mobile platforms

This work addresses the development of a fault-tolerant mobile platform. Fault-tolerant mechanical system design is an emerging technology that attempts to build highly reliable systems by incorporating hardware and software architectures. For this purpose, previous work in fault-tolerant were reviewed. Alternate architectures were evaluated to maximize the fault tolerance capabilities of the driving and steering systems of a mobile platform. The literature review showed that most of the research work on fault tolerance has been done in the area of kinematics and control systems of robotic arms. Therefore, hardware redundancy and fault tolerance in mobile robots is an area to be researched. The prototype constructed as part of this work demonstrated basic principles and uses of a fault-tolerant mechanism, and is believed to be the first such system in its class. It is recommended that different driving and steering architectures, and the fault-tolerant controllers\u27 performance be tested on this prototype

Trajectory Optimization for Velocity Jumps Reduction considering the Unexpectedness Characteristics of Space Manipulator Joint-Locked Failure

Aiming at reducing joint velocity jumps caused by an unexpected joint-locked failure during space manipulator on-orbit operations without shutting down manipulator, trajectory optimization strategy considering the unexpectedness characteristics of joint-locked failure is proposed in the paper, which can achieve velocity jumps reduction in both operation space and joint space simultaneously. In the strategy, velocity in operation space concerning task completion directly is treated as equality constraints, and velocity in joint space concerning motion performance is treated as objective function. Global compensation vector which consists of coefficient, gradient of manipulability, and orthogonal matrix of null space is constructed to minimize the objective function. For each particular failure time, unique optimal coefficient can be obtained when the objective function is minimal. As a basis, a method for optimal coefficient function fitting is proposed based on a priori failure information (possible failure time and the corresponding optimal coefficient) to guarantee the unexpectedness characteristics of joint-locked failure. Simulations are implemented to validate the efficiency of trajectory optimization strategy in reducing velocity jumps in both joint space and operation space. And the feasibility of coefficient function is also verified in reducing velocity jump no matter when joint-locked failure occurs

Proceedings of the NASA Conference on Space Telerobotics, volume 1

The theme of the Conference was man-machine collaboration in space. Topics addressed include: redundant manipulators; man-machine systems; telerobot architecture; remote sensing and planning; navigation; neural networks; fundamental AI research; and reasoning under uncertainty

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Kinematics and Robot Design I, KaRD2018

This volume collects the papers published on the Special Issue “Kinematics and Robot Design I, KaRD2018” (https://www.mdpi.com/journal/robotics/special_issues/KARD), which is the first issue of the KaRD Special Issue series, hosted by the open access journal “MDPI Robotics”. The KaRD series aims at creating an open environment where researchers can present their works and discuss all the topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”. KaRD2018 received 22 papers and, after the peer-review process, accepted only 14 papers. The accepted papers cover some theoretical and many design/applicative aspects

TOWARDS A NOVEL RESILIENT ROBOTIC SYSTEM

Resilient robotic systems are a kind of robotic system that is able to recover their original function after partial damage of the system. This is achieved by making changes on the partially damaged robot. In this dissertation study, a general robot, which makes sense by including active joints, passive joints, passive links, and passive adjustable links, was proposed in order to explore its resilience. Note that such a robot is also called an under-actuated robot. This dissertation presents the following studies. First, a novel architecture of robots was proposed, which is characterized as under-actuated robot. The architecture enables three types of recovery strategy, namely (1) change of the robot behavior, (2) change of the robot state, and (3) change of the robot configuration. Second, a novel docking system was developed, which allows for the realization of real-time assembly and disassembly and passive joint and adjustable passive link, and this thus enables the realization of the proposed architecture. Third, an example prototype system was built to experiment the effectiveness of the proposed architecture and to demonstrate the resilient behavior of the robot. Fourth, a novel method for robot configuration synthesis was developed, which is based on the genetic algorithm (GA), to determine the goal configuration of a partially damaged robot, at which the robot can still perform its original function. The novelty of the method lies in the integration of both discrete variables such as the number of modules, type of modules, and assembly patterns between modules and the continuous variables such as the length of modules and initial location of the robot. Fifth, a GA-based method for robot reconfiguration planning and scheduling was developed to actually change the robot from its initial configuration to the goal configuration with a minimum effort (time and energy). Two conclusions can be drawn from the above studies. First, the under-actuated robotic architecture can build a cost effective robot that can achieve the highest degree of resilience. Second, the design of the under-actuated resilient robot with the proposed docking system not only reduces the cost but also overcomes the two common actuator failures: (i) an active joint is unlocked (thus becoming a passive joint) and (ii) an active joint is locked (thus becoming an adjustable link). There are several contributions made by this dissertation to the field of robotics. The first is the finding that an under-actuated robot can be made more resilient. In the field of robotics, the concept of the under-actuated robot is available, but it has not been considered for reconfiguration (in literature, the reconfiguration is mostly about fully actuated robots). The second is the elaboration on the concept of reconfiguration planning, scheduling, and manipulation/control. In the literature of robotics, only the concept of reconfiguration planning is precisely given but not for reconfiguration scheduling. The third is the development of the model along with its algorithm for synthesis of the goal reconfiguration, reconfiguration planning, and scheduling. The application of the proposed under-actuated resilient robot lies in the operations in unknown or dangerous environments, for example, in rescue missions and space explorations. In these applications, replacement or repair of a damaged robot is impossible or cost-prohibited

Aerospace medicine and biology: A cumulative index to a continuing bibliography (supplement 345)

This publication is a cumulative index to the abstracts contained in Supplements 333 through 344 of Aerospace Medicine and Biology: A Continuing Bibliography. Seven indexes are included -- subject, personal author, corporate source, foreign technology, contract number, report number, and accession number