Automatic retrieval of crop characteristics: an example for hyperspectral AHS data from the AgriSAR campaign.

This paper presents the results of automated extraction of crop characteristics from hyperspectral earth observation data. The data was acquired with an airborne AHS imaging spectrometer in the framework of the joint European AgriSAR 2006 campaign. The AgriSAR campaign was directed by the ESA and took place at the DEMMIN test site in northeast Germany, an agricultural area dominated by large monocultures. An important objective of this campaign was to establish to what degree novel radar and optical technologies are able to provide accurate agro-meteorological parameters for precision farming purposes. Parameter retrieval in this study was performed with the CRASh approach, a software module based on the inversion of radiative transfer models. CRASh was developed at DLR as part of an automated operative processing chain for future hyperspectral missions. Validation of the model inversion results was performed with field measurements of leaf area index and leaf chlorophyll content which were carried out for winter wheat, winter barley, winter rape, maize, and sugar beet at two time steps during the 2006 growing season. Although spatial patterns of the model results generally coincide with the trends observed in the field, absolute accuracy of the fully automatically extracted variables appeared insufficient for precision agriculture purposes. The unsatisfying results are ascribed to a combination of causes, including angular anisotropy across the swath-width of the flight lines, the configuration of the applied bands, and the large number of model inversion solutions inherent to an automated environment in which little additional information on the observed canopy is present. Employing the airborne version of CRASh and incorporating a priori information on land cover and variable distributions is expected to drastically increase the retrieval performance

Effects of atmospheric, topographic, and BRDF correction on imaging spectroscopy-derived data products

Surface reflectance is an important data product in imaging spectroscopy for obtaining surface information. The complex retrieval of surface reflectance, however, critically relies on accurate knowledge of atmospheric absorption and scattering, and the compensation of these effects. Furthermore, illumination and observation geometry in combination with surface reflectance anisotropy determine dynamics in retrieved surface reflectance not related to surface absorption properties. To the best of authors’ knowledge, no comprehensive assessment of the impact of atmospheric, topographic, and anisotropy effects on derived surface information is available so far.This study systematically evaluates the impact of these effects on reflectance, albedo, and vegetation products. Using three well-established processing schemes (ATCOR F., ATCOR R., and BREFCOR), high-resolution APEX imaging spectroscopy data, covering a large gradient of illumination and observation angles, are brought to several processing states, varyingly affected by mentioned effects. Pixel-wise differences of surface reflectance, albedo, and spectral indices of neighboring flight lines are quantitatively analyzed in their respective overlapping area. We found that compensation of atmospheric effects reveals actual anisotropy-related dynamics in surface reflectance and derived albedo, related to an increase in pixel-wise relative reflectance and albedo differences of more than 40%. Subsequent anisotropy compensation allows us to successfully reduce apparent relative reflectance and albedo differences by up to 20%. In contrast, spectral indices are less affected by atmospheric and anisotropy effects, showing relative differences of 3% to 10% in overlapping regions of flight lines.We recommend to base decisions on the use of appropriate processing schemes on individual use cases considering envisioned data products

Evaluation of the MODIS LAI product using independent lidar-derived LAI: A case study in mixed conifer forest

This study presents an alternative assessment of the MODIS LAI product for a 58,000 ha evergreen needleleaf forest located in the western Rocky Mountain range in northern Idaho by using lidar data to model (R2=0.86, RMSE=0.76) and map LAI at higher resolution across a large number of MODIS pixels in their entirety. Moderate resolution (30 m) lidar-based LAI estimates were aggregated to the resolution of the 1-km MODIS LAI product and compared to temporally-coincident MODIS retrievals. Differences in the MODIS and lidar-derived values of LAI were grouped and analyzed by several different factors, including MODIS retrieval algorithm, sun/sensor geometry, and sub-pixel heterogeneity in both vegetation and terrain characteristics. Of particular interest is the disparity in the results when MODIS LAI was analyzed according to algorithm retrieval class. We observed relatively good agreement between lidar-derived and MODIS LAI values for pixels retrieved with the main RT algorithm without saturation for LAI LAI≤4. Moreover, for the entire range of LAI values, considerable overestimation of LAI (relative to lidar-derived LAI) occurred when either the main RT with saturation or back-up algorithm retrievals were used to populate the composite product regardless of sub-pixel vegetation structural complexity or sun/sensor geometry. These results are significant because algorithm retrievals based on the main radiative transfer algorithm with or without saturation are characterized as suitable for validation and subsequent ecosystem modeling, yet the magnitude of difference appears to be specific to retrieval quality class and vegetation structural characteristics

A Comparison of Foliage Profiles in the Sierra National Forest Obtained with a Full-Waveform Under-Canopy EVI Lidar System with the Foliage Profiles Obtained with an Airborne Full-Waveform LVIS Lidar System

Foliage profiles retrieved froma scanning, terrestrial, near-infrared (1064 nm), full-waveformlidar, the Echidna Validation Instrument (EVI), agree well with those obtained from an airborne, near-infrared, full-waveform, large footprint lidar, the Lidar Vegetation Imaging Sensor (LVIS). We conducted trials at 5 plots within a conifer stand at Sierra National Forest in August, 2008. Foliage profiles retrieved from these two lidar systems are closely correlated (e.g., r = 0.987 at 100 mhorizontal distances) at large spatial coverage while they differ significantly at small spatial coverage, indicating the apparent scanning perspective effect on foliage profile retrievals. Alsowe noted the obvious effects of local topography on foliage profile retrievals, particularly on the topmost height retrievals. With a fine spatial resolution and a small beam size, terrestrial lidar systems complement the strengths of the airborne lidars by making a detailed characterization of the crowns from a small field site, and thereby serving as a validation tool and providing localized tuning information for future airborne and spaceborne lidar missions

Retrieval of vegetation height in rice fields using polarimetric SAR interferometry with TanDEM-X data

This work presents for the first time a demonstration with satellite data of polarimetric SAR interferometry (PolInSAR) applied to the retrieval of vegetation height in rice fields. Three series of dual-pol interferometric SAR data acquired with large baselines (2–3 km) by the TanDEM-X system during its science phase (April–September 2015) are exploited. A novel inversion algorithm especially suited for rice fields cultivated in flooded soil is proposed and evaluated. The validation is carried out over three test sites located in geographically different areas: Sevilla (SW Spain), Valencia (E Spain), and Ipsala (W Turkey), in which different rice types are present. Results are obtained during the whole growth cycle and demonstrate that PolInSAR is useful to produce accurate height estimates (RMSE 10–20 cm) when plants are tall enough (taller than 25–40 cm), without relying on external reference information.This work has been supported by the Spanish Ministry of Economy and Competitiveness (MINECO) and EU FEDER under project TIN2014-55413-C2-2-P. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007–2013) under grant agreement 606983, and the Land-SAF (the EUMETSAT Network of Satellite Application Facilities) project. The in-situ measurements in the Ipsala site were conducted with the funding of The Scientific and Technological Research Council of Turkey (TUBITAK, Project No.: 113Y446)

NASA's surface biology and geology designated observable: A perspective on surface imaging algorithms

The 2017–2027 National Academies' Decadal Survey, Thriving on Our Changing Planet, recommended Surface Biology and Geology (SBG) as a “Designated Targeted Observable” (DO). The SBG DO is based on the need for capabilities to acquire global, high spatial resolution, visible to shortwave infrared (VSWIR; 380–2500 nm; ~30 m pixel resolution) hyperspectral (imaging spectroscopy) and multispectral midwave and thermal infrared (MWIR: 3–5 μm; TIR: 8–12 μm; ~60 m pixel resolution) measurements with sub-monthly temporal revisits over terrestrial, freshwater, and coastal marine habitats. To address the various mission design needs, an SBG Algorithms Working Group of multidisciplinary researchers has been formed to review and evaluate the algorithms applicable to the SBG DO across a wide range of Earth science disciplines, including terrestrial and aquatic ecology, atmospheric science, geology, and hydrology. Here, we summarize current state-of-the-practice VSWIR and TIR algorithms that use airborne or orbital spectral imaging observations to address the SBG DO priorities identified by the Decadal Survey: (i) terrestrial vegetation physiology, functional traits, and health; (ii) inland and coastal aquatic ecosystems physiology, functional traits, and health; (iii) snow and ice accumulation, melting, and albedo; (iv) active surface composition (eruptions, landslides, evolving landscapes, hazard risks); (v) effects of changing land use on surface energy, water, momentum, and carbon fluxes; and (vi) managing agriculture, natural habitats, water use/quality, and urban development. We review existing algorithms in the following categories: snow/ice, aquatic environments, geology, and terrestrial vegetation, and summarize the community-state-of-practice in each category. This effort synthesizes the findings of more than 130 scientists

Regional equivalent water thickness modeling from remote sensing across a tree cover/lai gradient in mediterranean forests of northern Tunisia

The performance of vegetation indexes derived from moderate resolution imaging spectroradiometer (MODIS) sensors is explored for drought monitoring in the forests of Northern Tunisia; representing a transition zone between the Mediterranean Sea and the Sahara Desert. We investigated the suitability of biomass and moisture vegetation indexes for vegetation water content expressed by the equivalent water thickness (EWT) in a Mediterranean forest ecosystem with contrasted water budgets and desiccation rates. We proposed a revised EWT at canopy level (EWTCAN) based on weekly field measurements of fuel moisture in seven species during the 2010 dry period, considering the mixture of plant functional types for water use (trees, shrubs and herbaceous layers) and a varying vegetation cover. MODIS vegetation indexes computed and smoothed over the dry season were highly correlated with the EWTCAN. The performances of moisture indexes Normalized Difference Infrared Index (NDII6 and NDII7) and Global Moisture Vegetation Index (GVMI6 and GVMI7) were comparable, whereas for biomass vegetation indexes, Normalized Difference Vegetation Index (NDVI), Modified Soil Adjusted Vegetation Index (MSAVI) and Adjusted Normalized Difference Vegetation Index (ANDVI) performed better than Enhanced Vegetation Index (EVI) and Soil Adjusted Vegetation Index (SAVI). We also identified the effect of Leaf Area Index (LAI) on EWTCAN monitoring at the regional scale under the tree cover/LAI gradient of the region from relatively dense to open forest. Statistical analysis revealed a significant decreasing linear relationship; indicating that for LAI less than two, the greater the LAI, the less responsive are the vegetation indexes to changes in EWTCAN; whereas for higher LAI, its influence becomes less significant and was not considered in the inversion models based on vegetation indexes. The EWTCAN time-course from LAI-adapted inversion models based on significantly-related vegetation indexes to EWTCAN showed close profiles resulting from the inversion models using NDVI, ANDVI, MSAVI and NDII6 applied during the dry season. The developed EWTCAN model from MODIS vegetation indexes for the study region was finally tested for its ability to capture the topo-climatic effects on the seasonal and the spatial patterns of desiccation/rewetting for keystone periods of Mediterranean vegetation functioning. Implications for further use in scientific developments or management are discussed

Monitoring the defoliation of hardwood forests in Pennsylvania using LANDSAT

An automated system for conducting annual gypsy moth defoliation surveys using LANDSAT MSS data and digital processing techniques is described. A two-step preprocessing procedure was developed that uses multitemporal data sets representing forest canopy conditions before and after defoliation to create a digital image in which all nonforest cover types are eliminated or masked out of a LANDSAT image that exhibits insect defoliation. A temporal window for defoliation assessment was identified and a statewide data base was established. A data management system to interface image analysis software with the statewide data base was developed and a cost benefit analysis of this operational system was conducted