Timing Analysis of the FlexRay Communication Protocol

FlexRay will very likely become the de-facto standard for in-vehicle communications. However, before it can be successfully used for safety-critical applications that require predictability, timing analysis techniques are necessary for providing bounds for the message communication times. In this paper, we propose techniques for determining the timing properties of messages transmitted in both the static (ST) and the dynamic (DYN) segments of a FlexRay communication cycle. The analysis techniques for messages are integrated in the context of a holistic schedulability analysis that computes the worst-case response times of all the tasks and messages in the system. We have evaluated the proposed analysis techniques using extensive experiments. 1

Simulation of Mixed Critical In-vehicular Networks

Future automotive applications ranging from advanced driver assistance to autonomous driving will largely increase demands on in-vehicular networks. Data flows of high bandwidth or low latency requirements, but in particular many additional communication relations will introduce a new level of complexity to the in-car communication system. It is expected that future communication backbones which interconnect sensors and actuators with ECU in cars will be built on Ethernet technologies. However, signalling from different application domains demands for network services of tailored attributes, including real-time transmission protocols as defined in the TSN Ethernet extensions. These QoS constraints will increase network complexity even further. Event-based simulation is a key technology to master the challenges of an in-car network design. This chapter introduces the domain-specific aspects and simulation models for in-vehicular networks and presents an overview of the car-centric network design process. Starting from a domain specific description language, we cover the corresponding simulation models with their workflows and apply our approach to a related case study for an in-car network of a premium car

An experimental study of the FlexRay dynamic segment

It is expected that the time-triggered FlexRay bus will replace the event-triggered Controller Area Network (CAN) for the high-speed in-vehicle communication in future automobiles. To this end, FlexRay provides a static segment for the transmission of periodic messages and a dynamic segment that is suitable for exchanging event-based (sporadic) messages. In this paper, we experimentally evaluate the operation of the FlexRay dynamic segment. In particular, we study how the maximum and average message delays are affected if the length of the dynamic segment, the message payload, the utilization of the dynamic segment and the priority assignment changes. Our experiments are carried out on a FlexRay network with 6 nodes

Modeling and verifying the FlexRay physical layer protocol with reachability checking of timed automata

In this thesis, I report on the verification of the resilience of the FlexRay automotive bus protocol's physical layer protocol against glitches during message transmission and drifting clocks. This entailed modeling a significant part of this industrially used communictation protocol and the underlying hardware as well as the possible error scenarios in fine detail. Verifying such a complex model with model-checking led me to the development of data-structures and algorithms able to handle the associated complexity using only reasonable resources. This thesis presents such data-structures and algorithms for reachability checking of timed automata. It also present modeling principles enabling the construction of timed automata models that can be efficiently checked, as well as the models arrived at. Finally, it reports on the verified resilience of FlexRay's physical layer protocol against specific patterns of glitches under varying assumptions about the underlying hardware, like clock drift.In dieser Dissertation berichte ich über den Nachweis der Resilienz des Bitübertragungsprotokolls für die physikalische Schicht des FlexRay-Fahrzeugbusprotokolls gegenüber Übertragungsfehlern und Uhrenverschiebung. Dafür wurde es notwendig, einen signifikanten Teil dieses industriell genutzten Kommunikationsprotokolls mit seiner Hardwareumgebung und die möglichen Fehlerszenarien detailliert zu modellieren. Ein so komplexes Modell mittels Modellprüfung zu überprüfen führte mich zur Entwicklung von Datenstrukturen und Algorithmen, die die damit verbundene Komplexität mit vernünftigen Ressourcenanforderungen bewältigen können. Diese Dissertation stellt solche Datenstrukturen und Algorithmen zur Erreichbarkeitsprüfung gezeiteter Automaten vor. Sie stellt auch Modellierungsprinzipien vor, die es ermöglichen, Modelle in Form gezeiteter Automaten zu konstruieren, die effizient überprüft werden können, sowie die erstellten Modelle. Schließlich berichtet sie über die überprüfte Resilienz des FlexRay-Bitübertragungsprotokolls gegenüber spezifischen Übertragungsfehlermustern unter verschiedenen Annahmen über die Hardwareumgebung, wie etwa die Uhrenverschiebung.DFG: SFB/TRR 14 "AVACS - Automatische Verifikation und Analyse komplexer Systeme

Safety-Critical Communication in Avionics

The aircraft of today use electrical fly-by-wire systems for manoeuvring. These safety-critical distributed systems are called flight control systems and put high requirements on the communication networks that interconnect the parts of the systems. Reliability, predictability, flexibility, low weight and cost are important factors that all need to be taken in to consideration when designing a safety-critical communication system. In this thesis certification issues, requirements in avionics, fault management, protocols and topologies for safety-critical communication systems in avionics are discussed and investigated. The protocols that are investigated in this thesis are: TTP/C, FlexRay and AFDX, as a reference protocol MIL-STD-1553 is used. As reference architecture analogue point-to-point is used. The protocols are described and evaluated regarding features such as services, maturity, supported physical layers and topologies.Pros and cons with each protocol are then illustrated by a theoretical implementation of a flight control system that uses each protocol for the highly critical communication between sensors, actuators and flight computers.The results show that from a theoretical point of view TTP/C could be used as a replacement for a point-to-point flight control system. However, there are a number of issues regarding the physical layer that needs to be examined. Finally a TTP/C cluster has been implemented and basic functionality tests have been conducted. The plan was to perform tests on delays, start-up time and reintegration time but the time to acquire the proper hardware for these tests exceeded the time for the thesis work. More advanced testing will be continued here at Saab beyond the time frame of this thesis