2,868 research outputs found
Smart Traction Control Systems for Electric Vehicles Using Acoustic Road-type Estimation
The application of traction control systems (TCS) for electric vehicles (EV)
has great potential due to easy implementation of torque control with
direct-drive motors. However, the control system usually requires road-tire
friction and slip-ratio values, which must be estimated. While it is not
possible to obtain the first one directly, the estimation of latter value
requires accurate measurements of chassis and wheel velocity. In addition,
existing TCS structures are often designed without considering the robustness
and energy efficiency of torque control. In this work, both problems are
addressed with a smart TCS design having an integrated acoustic road-type
estimation (ARTE) unit. This unit enables the road-type recognition and this
information is used to retrieve the correct look-up table between friction
coefficient and slip-ratio. The estimation of the friction coefficient helps
the system to update the necessary input torque. The ARTE unit utilizes machine
learning, mapping the acoustic feature inputs to road-type as output. In this
study, three existing TCS for EVs are examined with and without the integrated
ARTE unit. The results show significant performance improvement with ARTE,
reducing the slip ratio by 75% while saving energy via reduction of applied
torque and increasing the robustness of the TCS.Comment: Accepted to be published by IEEE Trans. on Intelligent Vehicles, 22
Jan 201
PAC: A Novel Self-Adaptive Neuro-Fuzzy Controller for Micro Aerial Vehicles
There exists an increasing demand for a flexible and computationally
efficient controller for micro aerial vehicles (MAVs) due to a high degree of
environmental perturbations. In this work, an evolving neuro-fuzzy controller,
namely Parsimonious Controller (PAC) is proposed. It features fewer network
parameters than conventional approaches due to the absence of rule premise
parameters. PAC is built upon a recently developed evolving neuro-fuzzy system
known as parsimonious learning machine (PALM) and adopts new rule growing and
pruning modules derived from the approximation of bias and variance. These rule
adaptation methods have no reliance on user-defined thresholds, thereby
increasing the PAC's autonomy for real-time deployment. PAC adapts the
consequent parameters with the sliding mode control (SMC) theory in the
single-pass fashion. The boundedness and convergence of the closed-loop control
system's tracking error and the controller's consequent parameters are
confirmed by utilizing the LaSalle-Yoshizawa theorem. Lastly, the controller's
efficacy is evaluated by observing various trajectory tracking performance from
a bio-inspired flapping-wing micro aerial vehicle (BI-FWMAV) and a rotary wing
micro aerial vehicle called hexacopter. Furthermore, it is compared to three
distinctive controllers. Our PAC outperforms the linear PID controller and
feed-forward neural network (FFNN) based nonlinear adaptive controller.
Compared to its predecessor, G-controller, the tracking accuracy is comparable,
but the PAC incurs significantly fewer parameters to attain similar or better
performance than the G-controller.Comment: This paper has been accepted for publication in Information Science
Journal 201
Adaptive Approximation-Based Control for Nonlinear Systems: A Unified Solution with Accurate and Inaccurate Measurements
A unified solution to adaptive approximation-based control for nonlinear
systems with accurate and inaccurate state measurement is synthesized in this
study. Starting from the standard adaptive approximation-based controller with
accurate state measurement, its corresponding physical interpretation,
stability conclusion, and learning ability are rigorously addressed when facing
additive measurement inaccuracy, and explicit answers are obtained in the
framework of both controller matching and system matching. Finally, it proves
that, with a certain condition, the standard adaptive approximation-based
controller works as a unified solution for the cases with accurate and
inaccurate measurement, and the solution can be extended to the nonlinear
system control problems with extra unknown dynamics or faults in actuator
and/or process dynamics. A single-link robot arm example is used for the
simulation demonstration of the unified solution
A Review of Control Techniques for Wind Energy Conversion System
Wind energy is the most efficient and advanced form of renewable energy (RE) in recent decades, and an effective controller is required to regulate the power generated by wind energy. This study provides an overview of state-of-the-art control strategies for wind energy conversion systems (WECS). Studies on the pitch angle controller, the maximum power point tracking (MPPT) controller, the machine side controller (MSC), and the grid side controller (GSC) are reviewed and discussed. Related works are analyzed, including evolution, software used, input and output parameters, specifications, merits, and limitations of different control techniques. The analysis shows that better performance can be obtained by the adaptive and soft-computing based pitch angle controller and MPPT controller, the field-oriented control for MSC, and the voltage-oriented control for GSC. This study provides an appropriate benchmark for further wind energy research
Fuzzy control turns 50: 10 years later
In 2015, we celebrate the 50th anniversary of Fuzzy Sets, ten years after the main milestones regarding its applications in fuzzy control in their 40th birthday were reviewed in FSS, see [1]. Ten years is at the same time a long period and short time thinking to the inner dynamics of research. This paper, presented for these 50 years of Fuzzy Sets is taking into account both thoughts. A first part presents a quick recap of the history of fuzzy control: from model-free design, based on human reasoning to quasi-LPV (Linear Parameter Varying) model-based control design via some milestones, and key applications. The second part shows where we arrived and what the improvements are since the milestone of the first 40 years. A last part is devoted to discussion and possible future research topics.Guerra, T.; Sala, A.; Tanaka, K. (2015). Fuzzy control turns 50: 10 years later. Fuzzy Sets and Systems. 281:162-182. doi:10.1016/j.fss.2015.05.005S16218228
- …