A Novel Rate Control Algorithm for Onboard Predictive Coding of Multispectral and Hyperspectral Images

Predictive coding is attractive for compression onboard of spacecrafts thanks to its low computational complexity, modest memory requirements and the ability to accurately control quality on a pixel-by-pixel basis. Traditionally, predictive compression focused on the lossless and near-lossless modes of operation where the maximum error can be bounded but the rate of the compressed image is variable. Rate control is considered a challenging problem for predictive encoders due to the dependencies between quantization and prediction in the feedback loop, and the lack of a signal representation that packs the signal's energy into few coefficients. In this paper, we show that it is possible to design a rate control scheme intended for onboard implementation. In particular, we propose a general framework to select quantizers in each spatial and spectral region of an image so as to achieve the desired target rate while minimizing distortion. The rate control algorithm allows to achieve lossy, near-lossless compression, and any in-between type of compression, e.g., lossy compression with a near-lossless constraint. While this framework is independent of the specific predictor used, in order to show its performance, in this paper we tailor it to the predictor adopted by the CCSDS-123 lossless compression standard, obtaining an extension that allows to perform lossless, near-lossless and lossy compression in a single package. We show that the rate controller has excellent performance in terms of accuracy in the output rate, rate-distortion characteristics and is extremely competitive with respect to state-of-the-art transform coding

A novel semi-fragile forensic watermarking scheme for remote sensing images

Peer-reviewedA semi-fragile watermarking scheme for multiple band images is presented. We propose to embed a mark into remote sensing images applying a tree structured vector quantization approach to the pixel signatures, instead of processing each band separately. The signature of themmultispectral or hyperspectral image is used to embed the mark in it order to detect any significant modification of the original image. The image is segmented into threedimensional blocks and a tree structured vector quantizer is built for each block. These trees are manipulated using an iterative algorithm until the resulting block satisfies a required criterion which establishes the embedded mark. The method is shown to be able to preserve the mark under lossy compression (above a given threshold) but, at the same time, it detects possibly forged blocks and their position in the whole image.Se presenta un esquema de marcas de agua semi-frágiles para múltiples imágenes de banda. Proponemos incorporar una marca en imágenes de detección remota, aplicando un enfoque de cuantización del vector de árbol estructurado con las definiciones de píxel, en lugar de procesar cada banda por separado. La firma de la imagen hiperespectral se utiliza para insertar la marca en el mismo orden para detectar cualquier modificación significativa de la imagen original. La imagen es segmentada en bloques tridimensionales y un cuantificador de vector de estructura de árbol se construye para cada bloque. Estos árboles son manipulados utilizando un algoritmo iteractivo hasta que el bloque resultante satisface un criterio necesario que establece la marca incrustada. El método se muestra para poder preservar la marca bajo compresión con pérdida (por encima de un umbral establecido) pero, al mismo tiempo, detecta posiblemente bloques forjados y su posición en la imagen entera.Es presenta un esquema de marques d'aigua semi-fràgils per a múltiples imatges de banda. Proposem incorporar una marca en imatges de detecció remota, aplicant un enfocament de quantització del vector d'arbre estructurat amb les definicions de píxel, en lloc de processar cada banda per separat. La signatura de la imatge hiperespectral s'utilitza per inserir la marca en el mateix ordre per detectar qualsevol modificació significativa de la imatge original. La imatge és segmentada en blocs tridimensionals i un quantificador de vector d'estructura d'arbre es construeix per a cada bloc. Aquests arbres són manipulats utilitzant un algoritme iteractiu fins que el bloc resultant satisfà un criteri necessari que estableix la marca incrustada. El mètode es mostra per poder preservar la marca sota compressió amb pèrdua (per sobre d'un llindar establert) però, al mateix temps, detecta possiblement blocs forjats i la seva posició en la imatge sencera

Sparse representation based hyperspectral image compression and classification

Abstract This thesis presents a research work on applying sparse representation to lossy hyperspectral image compression and hyperspectral image classification. The proposed lossy hyperspectral image compression framework introduces two types of dictionaries distinguished by the terms sparse representation spectral dictionary (SRSD) and multi-scale spectral dictionary (MSSD), respectively. The former is learnt in the spectral domain to exploit the spectral correlations, and the latter in wavelet multi-scale spectral domain to exploit both spatial and spectral correlations in hyperspectral images. To alleviate the computational demand of dictionary learning, either a base dictionary trained offline or an update of the base dictionary is employed in the compression framework. The proposed compression method is evaluated in terms of different objective metrics, and compared to selected state-of-the-art hyperspectral image compression schemes, including JPEG 2000. The numerical results demonstrate the effectiveness and competitiveness of both SRSD and MSSD approaches. For the proposed hyperspectral image classification method, we utilize the sparse coefficients for training support vector machine (SVM) and k-nearest neighbour (kNN) classifiers. In particular, the discriminative character of the sparse coefficients is enhanced by incorporating contextual information using local mean filters. The classification performance is evaluated and compared to a number of similar or representative methods. The results show that our approach could outperform other approaches based on SVM or sparse representation. This thesis makes the following contributions. It provides a relatively thorough investigation of applying sparse representation to lossy hyperspectral image compression. Specifically, it reveals the effectiveness of sparse representation for the exploitation of spectral correlations in hyperspectral images. In addition, we have shown that the discriminative character of sparse coefficients can lead to superior performance in hyperspectral image classification.EM201

Lossless compression of hyperspectral images

Band ordering and the prediction scheme are the two major aspects of hyperspectral imaging which have been studied to improve the performance of the compression system. In the prediction module, we propose spatio-spectral prediction methods. Two non-linear spectral prediction methods have been proposed in this thesis. NPHI (Non-linear Prediction for Hyperspectral Images) is based on a band look-ahead technique wherein a reference band is included in the prediction of pixels in the current band. The prediction technique estimates the variation between the contexts of the two bands to modify the weights computed in the reference band to predict the pixels in the current band. EPHI (Edge-based Prediction for Hyperspectral Images) is the modified NPHI technique wherein an edge-based analysis is used to classify the pixels into edges and non-edges in order to perform the prediction of the pixel in the current band. Three ordering methods have been proposed in this thesis. The first ordering method computes the local and global features in each band to group the bands. The bands in each group are ordered by estimating the compression ratios achieved between the entire band in the group and then ordering them using Kruskal\u27s algorithm. The other two methods of ordering compute the compression ratios between b-neighbors in performing the band ordering

Constant-SNR, rate control and entropy coding for predictive lossy hyperspectral image compression

Predictive lossy compression has been shown to represent a very flexible framework for lossless and lossy onboard compression of multispectral and hyperspectral images with quality and rate control. In this paper, we improve predictive lossy compression in several ways, using a standard issued by the Consultative Committee on Space Data Systems, namely CCSDS-123, as an example of application. First, exploiting the flexibility in the error control process, we propose a constant-signal-to-noise-ratio algorithm that bounds the maximum relative error between each pixel of the reconstructed image and the corresponding pixel of the original image. This is very useful to avoid low-energy areas of the image being affected by large errors. Second, we propose a new rate control algorithm that has very low complexity and provides performance equal to or better than existing work. Third, we investigate several entropy coding schemes that can speed up the hardware implementation of the algorithm and, at the same time, improve coding efficiency. These advances make predictive lossy compression an extremely appealing framework for onboard systems due to its simplicity, flexibility, and coding efficiency

An Overview of Multi-Processor Approximate Message Passing

Approximate message passing (AMP) is an algorithmic framework for solving linear inverse problems from noisy measurements, with exciting applications such as reconstructing images, audio, hyper spectral images, and various other signals, including those acquired in compressive signal acquisiton systems. The growing prevalence of big data systems has increased interest in large-scale problems, which may involve huge measurement matrices that are unsuitable for conventional computing systems. To address the challenge of large-scale processing, multiprocessor (MP) versions of AMP have been developed. We provide an overview of two such MP-AMP variants. In row-MP-AMP, each computing node stores a subset of the rows of the matrix and processes corresponding measurements. In column- MP-AMP, each node stores a subset of columns, and is solely responsible for reconstructing a portion of the signal. We will discuss pros and cons of both approaches, summarize recent research results for each, and explain when each one may be a viable approach. Aspects that are highlighted include some recent results on state evolution for both MP-AMP algorithms, and the use of data compression to reduce communication in the MP network

GPU acceleration of predictive partitioned vector quantization for ultraspectral sounder data compression

[[abstract]]For the large-volume ultraspectral sounder data, compression is desirable to save storage space and transmission time. To retrieve the geophysical paramters without losing precision the ultraspectral sounder data compression has to be lossless. Recently there is a boom on the use of graphic processor units (GPU) for speedup of scientific computations. By identifying the time dominant portions of the code that can be executed in parallel, significant speedup can be achieved by using GPU. Predictive partitioned vector quantization (PPVQ) has been proven to be an effective lossless compression scheme for ultraspectral sounder data. It consists of linear prediction, bit depth partitioning, vector quantization, and entropy coding. Two most time consuming stages of linear prediction and vector quantization are chosen for GPU-based implementation. By exploiting the data parallel characteristics of these two stages, a spatial division design shows a speedup of 72x in our four-GPU-based implementation of the PPVQ compression scheme.[[notice]]補正完畢[[journaltype]]國外[[incitationindex]]SCI[[booktype]]紙本[[countrycodes]]US