A sum-of-sinusoids based simulation model for the joint shadowing process in urban peer-to-peer radio channels

This document is made available in accordance with publisher policies. Please cite only the published version using the reference above. Full terms of use are available

Wireless networks in industrial environments: state of the art and issues

Wireless is everywhere nowadays and WLAN (i.e. 802.11 standard family) has became used by almost any communications devices in the mass market. The recent achievements in the fields of modulation techniques, such as Spread Spectrum, coding methods, such as Turbocodes, CDMA2000, and frequencies allocation methods, such as OFDM and Frequency Hopping, has pushed the growing uses of reliable and low-cost wireless technologies. Among them the last standards are: IEEE 802.11 family (i.e. WiFi), HyperLAN and HyperLAN2, IEEE 802.15 (i.e. WPAN), IEEE 802.16 (i.e. WiMAX)… However, the industrial environments are not taken into consideration in the design of those standards, because its harsh constraints has specific characteristics (reliability, interferences with existing equipments, multi-path propagation, low-power consumption, real-time reconfiguration, security…) that need specific requirements and eventually standards. This paper will intent to give an overview of the wireless technologies and discusses the current and future possible technologies for the uses in the industrial environments (power plants and stations, factories, industrial buildings, automotive…). Our current works showed us that there is no perfect technology by it-self but the best trade-off solution is a hybrid architecture combining the right wired and wireless technologies.1st IFIP International Conference on Ad-Hoc NetWorkingRed de Universidades con Carreras en Informática (RedUNCI

Performance Evaluation of 5 GHz IEEE 802.11n WPA2 Laboratory Links

The increasing importance of wireless communications, involving electronic devices, has been widely recognized. Performance is a crucial issue, leading to more reliable and efficient communications. Security is also critically important. Laboratory measurements were performed about several performance aspects of Wi-Fi IEEE 802.11n WPA2 5 GHz links. Our study contributes to performance evaluation of this technology, using available equipments (HP V-M200 access points and Linksys WPC600N adapters). New detailed results are presented and discussed, namely at OSI level 4, from TCP and UDP experiments. TCP throughput is measured versus TCP packet length. Jitter and percentage datagram loss are measured versus UDP datagram size. Results are compared for both point-to-point and point-to-multipoint links. Comparisons are also made to corresponding results obtained for Open links. Conclusions are drawn about performance of the links.info:eu-repo/semantics/publishedVersio

System level modelling and design of hypergraph based wireless system area networks for multi-computer systems

This thesis deals with issues pertaining the wireless multicomputer interconnection networks namely topology and Medium Access Control (MAC). It argues that new channel assignment technique based on regular low-dimensional hypergraph networks, the dual radio wireless hypermesh, represents a promising alternative high-performance wireless interconnection network for the future multicomputers to shared communication medium networks and/or ordinary wireless mesh networks, which have been widely used in current wireless networks. The focus of this work is on improving the network throughput while maintaining a relatively low latency of a wireless network system. By means of a Carrier Sense Multiple Access (CSMA) based design of the MAC protocol and based on the desirable features of hypermesh network topology a relatively high performance network has been introduced. Compared to the CSMA shared communication channel model, which is currently the de facto MAC protocol for most of wireless networks, our design is shown to achieve a significant increase in network throughput with less average network latency for large number of communication nodes. SystemC model of the proposed wireless hypermesh, validated through mathematical models, are then introduced. The analysis has been incorporated in the proper SystemC design methodology which facilitates the integration of communication modelling into the design modelling at the early stages of the system development. Another important application of SystemC modelling techniques is to perform meaningful comparative studies of different protocols, or new implementations to determine which communication scenario performs better and the ability to modify models to test system sensitivity and tune performance. Effects of different design parameters (e.g., packet sizes, number of nodes) has been carried out throughout this work. The results shows that the proposed structure has out perform the existing shared medium network structure and it can support relatively high number of wireless connected computers than conventional networks

Belaidžio ryšio tinklų terpės prieigos valdymo tyrimas

Over the years, consumer requirements for Quality of Service (QoS) has been growing exponentially. Recently, the ratification process of newly IEEE 802.11ad amendment to IEEE 802.11 was finished. The IEEE 802.11ad is the newly con-sumer wireless communication approach, which will gain high spot on the 5G evolution. Major players in wireless market, such as Qualcomm already are inte-grating solutions from unlicensed band, like IEEE 802.11ac, IEEE 802.11ad into their architecture of LTE PRO (the next evolutionary step for 5G networking) (Qualcomm 2013; Parker et al. 2015). As the demand is growing both in enter-prise wireless networking and home consumer markets. Consumers started to no-tice the performance degradation due to overcrowded unlicensed bands. The un-licensed bands such as 2.4 GHz, 5 GHz are widely used for up-to-date IEEE 802.11n/ac technologies with upcoming IEEE 802.11ax. However, overusage of the available frequency leads to severe interference issue and consequences in to-tal system performance degradation, currently existing wireless medium access method can not sustain the increasing intereference and thus wireless needs a new methods of wireless medium access. The main focal point of this dissertation is to improve wireless performance in dense wireless networks. In dissertation both the conceptual and multi-band wireless medium access methods are considered both from theoretical point of view and experimental usage. The introduction chapter presents the investigated problem and it’s objects of research as well as importance of dissertation and it’s scientific novelty in the unlicensed wireless field. Chapter 1 revises used literature. Existing and up-to-date state-of-the-art so-lution are reviewed, evaluated and key point advantages and disadvantages are analyzed. Conclusions are drawn at the end of the chapter. Chapter 2 describes theoretical analysis of wireless medium access protocols and the new wireless medium access method. During analysis theoretical simula-tions are performed. Conclusions are drawn at the end of the chapter. Chapter 3 is focused on the experimental components evaluation for multi-band system, which would be in line with theoretical concept investigations. The experimental results, showed that components of multi-band system can gain sig-nificant performance increase when compared to the existing IEEE 802.11n/ac wireless systems. General conclusions are drawn after analysis of measurement results

Link layer protocol performance of indoor infrared wireless communications

The increasing deployment of portable computers and mobile devices leads to an increasing demand for wireless connections. Infrared presentsseveral advantagesover radio for indoor wireless connectivity but infrared link quality is affected by ambient infrared noise and by low power transmission levels due to eye safety limitations. The Infrared Data Association (IrDA) has developed the widely used IrDA 1.x protocol standard for short range, narrow beam, point to point connections.IrDA addressedthe requirement for indoor multipoint connectivity with the development of the Advanced Infrared (AIr) protocol stack. This work analyses infrared link layer design based on IrDA proposals for addressing link layer topics and suggests implementation issues and protocol modifications that improve the operation of short range infrared connections. The performance of optical wireless links is measuredby the utilization, which can be drawn at the data link layer. A new mathematical model is developed that reaches a simple equation that calculates IrDA 1.x utilization. The model is validated by comparing its outcome with simulation results obtained using the OPNET modeler. The mathematical model is employed to study the effectiveness on utilization of physical and link layer parameters.The simple equation gives insights for the optimum control of the infrared link for maximum utilization. By differentiating the utilization equation, simple formulas are derived for optimum values of the window and frame size parameters. Analytical results indicate that significant utilization increase is observed if the optimum values are implemented, especially for high error rate links. A protocolimprovement that utilizes special Supervisory frames (S-frames) to pass transmission control is proposed to deal with delays introduced by F-timer expiration. Results indicate that employing the special S-frame highly improves utilization when optimum window and frame size values are implemented. The achieved practical utilization increase for optimum parameter implementation is confirmed by meansof simulation. AIr protocol trades speedfor range by employing Repetition Rate (RR) coding to achieve the increased transmission range required for wireless LAN connectivity. AIr employs the RTS/CTS medium reservation scheme to cope with hidden stations and CSMA/CA techniques with linear contention window (CW) adjustment for medium access. A mathematical model is developed for the AIr collision avoidance (CA) procedures and validated by comparing analysis with simulation results. The model is employed to examine the effectiveness of the CA parameters on utilization. By differentiating the utilization equation, the optimum CW size that maximises utilization as a function of the number of the transmitting stations is derived. The proposed linear CW adjustment is very effective in implementing CW values close to optimum and thus minimizing CA delays. AIr implements a Go-Back-N retransmission scheme at high or low level to cope with transmission errors. AIr optionally implements a Stop-and-Wait retransmission scheme to efficiently implement RR coding. Analytical models for the AIr retransmission schemes are developed and employed to compare protocol utilization for different link parametervalues. Finally, the effectiveness of the proposedRR coding on utilization for different retransmission schemes is explored

Performance Evaluation of IEEE 802.11a 54 Mbps Open Laboratory Links

The increasing importance of wireless communications, involving electronic devices, has been widely recognized. Performance is a fundamental issue, leading to more reliable and efficient communications. Security is also critically important. Laboratory measurements were performed about several performance aspects of Wi-Fi IEEE 802.11a 54 Mbps Open links. Our study contributes to performance evaluation of this technology, using available equipments (HP V-M200 access points and Linksys WPC600N adapters). New detailed results are presented and discussed, namely at OSI level 4, from TCP and UDP experiments. TCP throughput is measured versus TCP packet length. Jitter and percentage datagram loss are measured versus UDP datagram size. Results are compared for both point-to-point and point-to-multipoint links. Conclusions are drawn about performance of the links.info:eu-repo/semantics/publishedVersio