Performance Study of Shared Versus Nonshared Bandwidth on a Packet-Switched Network

In wide area computer data communications, many networks have evolved by satisfying increased user demands in the most expedient manner. In some cases, new users’ demands are satisfied by installing a new link, rather than sharing the links that are already in place. This research investigates the differences in performance between using a dedicated link for each source destination pair (nonshared bandwidth) and using a single link to be used by all source destination pairs (shared bandwidth). Simulation models are developed for a wide area network using shared bandwidth, and a wide area network using nonshared bandwidth. The quality of service offered by each network is based on its responsiveness and productivity. Responsiveness will be measured in terms of average end to end delay of packet transmission, and productivity will be measured in terms of percent bandwidth utilization. The networks are modeled under a common set of operating assumptions and system environment. This allows for accurate comparison of packet delay and bandwidth utilization. Two variable input parameters are used in the simulation: intensity of input traffic load, and amount of link capacity. Provided that the intensity of the input traffic load remains below the network saturation level, it is shown that the shared system clearly outperforms the nonshared system. This result occurs for both a uniform and a nonuniform traffic load destination distribution

Data communication network at the ASRM facility

The main objective of the report is to present the overall communication network structure for the Advanced Solid Rocket Motor (ASRM) facility being built at Yellow Creek near Iuka, Mississippi. This report is compiled using information received from NASA/MSFC, LMSC, AAD, and RUST Inc. As per the information gathered, the overall network structure will have one logical FDDI ring acting as a backbone for the whole complex. The buildings will be grouped into two categories viz. manufacturing critical and manufacturing non-critical. The manufacturing critical buildings will be connected via FDDI to the Operational Information System (OIS) in the main computing center in B 1000. The manufacturing non-critical buildings will be connected by 10BASE-FL to the Business Information System (BIS) in the main computing center. The workcells will be connected to the Area Supervisory Computers (ASCs) through the nearest manufacturing critical hub and one of the OIS hubs. The network structure described in this report will be the basis for simulations to be carried out next year. The Comdisco's Block Oriented Network Simulator (BONeS) will be used for the network simulation. The main aim of the simulations will be to evaluate the loading of the OIS, the BIS, the ASCs, and the network links by the traffic generated by the workstations and workcells throughout the site

Controlling Network Latency in Mixed Hadoop Clusters: Do We Need Active Queue Management?

With the advent of big data, data center applications are processing vast amounts of unstructured and semi-structured data, in parallel on large clusters, across hundreds to thousands of nodes. The highest performance for these batch big data workloads is achieved using expensive network equipment with large buffers, which accommodate bursts in network traffic and allocate bandwidth fairly even when the network is congested. Throughput-sensitive big data applications are, however, often executed in the same data center as latency-sensitive workloads. For both workloads to be supported well, the network must provide both maximum throughput and low latency. Progress has been made in this direction, as modern network switches support Active Queue Management (AQM) and Explicit Congestion Notifications (ECN), both mechanisms to control the level of queue occupancy, reducing the total network latency. This paper is the first study of the effect of Active Queue Management on both throughput and latency, in the context of Hadoop and the MapReduce programming model. We give a quantitative comparison of four different approaches for controlling buffer occupancy and latency: RED and CoDel, both standalone and also combined with ECN and DCTCP network protocol, and identify the AQM configurations that maintain Hadoop execution time gains from larger buffers within 5%, while reducing network packet latency caused by bufferbloat by up to 85%. Finally, we provide recommendations to administrators of Hadoop clusters as to how to improve latency without degrading the throughput of batch big data workloads.The research leading to these results has received funding from the European Unions Seventh Framework Programme (FP7/2007–2013) under grant agreement number 610456 (Euroserver). The research was also supported by the Ministry of Economy and Competitiveness of Spain under the contracts TIN2012-34557 and TIN2015-65316-P, Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272), HiPEAC-3 Network of Excellence (ICT- 287759), and the Severo Ochoa Program (SEV-2011-00067) of the Spanish Government.Peer ReviewedPostprint (author's final draft

Performance evaluation of Fast Ethernet, ATM and Myrinet under PVM

Congestion in network switches can limit the communication traffic between Parallel Virtual Machine (PVM) nodes in a parallel computation. The research introduces a new benchmark to evaluate the performance of PVM in various networking environments. The benchmark is used to achieve a better understanding of performance limitations in parallel computing that are imposed by the choice of the network. The networks considered here are Fast Ethernet, Asynchronous Transfer Mode (ATM) OC-3c (155Mb/s) and Myrinet. Together, they represent an interesting range of alternatives for parallel cluster computing. A characterization of network delays and throughput and a comparison of the expected costs of the three environments are developed to provide a basis for an informed decision on the networking methods and topology for a parallel database that is being considered for FBI\u27s National DNA Indexing System (NDIS)[17]. This network is used for communications among the nodes of the parallel machine; thus the security requirements defined for the FBI\u27s Criminal Justice Information Services Division Wide Area Network (CJIS-WAN) [12] are not a concern

Quality of service modeling and analysis for carrier ethernet

Today, Ethernet is moving into the mainstream evolving into a carrier grade technology. Termed as Carrier Ethernet it is expected to overcome most of the\ud shortcomings of native Ethernet. It is envisioned to carry services end-to-end serving corporate data networking and broadband access demands as well as backhauling wireless traffic. As the penetration of Ethernet increases, the offered Quality of Service (QoS) will become increasingly important and a distinguishing factor between different service providers. The challenge is to meet the QoS requirements of end applications such as response times, throughput, delay and jitter by managing the network resources at hand. Since Ethernet was not designed to operate in large public networks it does not possess functionalities to address this issue. In this thesis we propose and analyze mechanisms which improve the QoS performance of Ethernet enabling it to meet the demands of the current and next generation services and applications.\u

Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Connection Robustness for Wireless Moving Networks Using Transport Layer Multi-homing

Given any form of mobility management through wireless communication, one useful enhancement is improving the reliability and robustness of transport-layer connections in a heterogeneous mobile environment. This is particularly true in the case of mobile networks with multiple vertical handovers. In this thesis, issues and challenges in mobility management for mobile terminals in such a scenario are addressed, and a number of techniques to facilitate and improve efficiency and the QoS for such a handover are proposed and investigated. These are initially considered in an end-to-end context and all protocols and changes happened in the middleware of the connection where the network is involved with handover issues and end user transparency is satisfied. This thesis begins by investigating mobility management solutions particularly the transport layer models, also making significant observation pertinent to multi-homing for moving networks in general. A new scheme for transport layer tunnelling based on SCTP is proposed. Consequently a novel protocol to handle seamless network mobility in heterogeneous mobile networks, named nSCTP, is proposed. Efficiency of this protocol in relation to QoS for handover parameters in an end-to-end connection while wired and wireless networks are available is considered. Analytically and experimentally it has been proved that this new scheme can significantly increase the throughput, particularly when the mobile networks roam frequently. The detailed plan for the future improvements and expansion is also provided