3,065 research outputs found

    Optical fibre local area networks

    Get PDF

    Benchmarking and viability assessment of optical packet switching for metro networks

    Get PDF
    Optical packet switching (OPS) has been proposed as a strong candidate for future metro networks. This paper assesses the viability of an OPS-based ring architecture as proposed within the research project DAVID (Data And Voice Integration on DWDM), funded by the European Commission through the Information Society Technologies (IST) framework. Its feasibility is discussed from a physical-layer point of view, and its limitations in size are explored. Through dimensioning studies, we show that the proposed OPS architecture is competitive with respect to alternative metropolitan area network (MAN) approaches, including synchronous digital hierarchy, resilient packet rings (RPR), and star-based Ethernet. Finally, the proposed OPS architectures are discussed from a logical performance point of view, and a high-quality scheduling algorithm to control the packet-switching operations in the rings is explained

    Quality of service differentiation for multimedia delivery in wireless LANs

    Get PDF
    Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

    Měření Triple play služeb v hybridní síti

    Get PDF
    The master's thesis deals with a project regarding the implementation, design and the quality of IPTV, VoIP and Data services within the Triple Play services. In heterostructural networks made up of GEPON and xDSL technologies. Different lengths of the optical and metallic paths were used for the measurements. The first part of the thesis is theoretically analyzed the development and trend of optical and metallic networks. The second part deals with the measurement of typical optical and metallic parameters on the constructed experimental network, where its integrity was tested. Another part of the thesis is the evaluation of Triple play results, regarding the test where the network was variously tasked/burdened with data traffic and evaluated according to defined standards. The last part is concerned with the Optiwave Software simulation environment.Diplomová práce se zabývá návrhem, realizací a kvalitou služeb IPTV, VoIP a Data v rámci Triple play služeb v heterostrukturní sítí tvořené GEPON a xDSL technologiemi. Pro měření byli využity různé délky optické a metalické trasy. První části diplomové práce je teoreticky rozebrán vývoj a trend optických a metalických sítí. Druhá část se zaměřuje na měření typických optických a metalických parametrů na vybudované experimentální síti, kde byla následně testována její integrita. Dalším bodem práce je vyhodnocení výsledků Triple play, kde síť je různě zatěžována datovým provozem a následně vyhodnocována podle definovaných norem. Závěr práce je věnovaný simulačnímu prostředí Optiwave.440 - Katedra telekomunikační technikyvýborn

    Empirical assessment of VoIP overload detection tests

    Get PDF
    The control of communication networks critically relies on procedures capable of detecting unanticipated load changes. In this paper we explore such techniques, in a setting in which each connection consumes roughly the same amount of bandwidth (with VoIP as a leading example). We focus on large-deviations based techniques developed earlier in that monitor the number of connections present, and that issue an alarm when this number abruptly changes. The procedures proposed in are demonstrated by using real traces from an operational environment. Our experiments show that our detection procedure is capable of adequately identifying load changes

    Cost-effective Information and Communication Technology (ICT) infrastructure for Tanziania

    Get PDF
    The research conducted an Information and Communication Technology (ICT) field survey, the results revealed that Tanzania is still lagging behind in the ICT sector due to the lack of an internationally connected terrestrial ICT infrastructure; Internet connectivity to the rest of the world is via expensive satellite links, thus leaving the majority of the population unable to access the Internet services due to its high cost. Therefore, an ICT backbone infrastructure is designed that exploits optical DWDM network technology, which un-locks bandwidth bottlenecks and provides higher capacity which will provide ICT services such as Internet, voice, videos and other multimedia interactions at an affordable cost to the majority of the people who live in the urban and rural areas of Tanzania. The research analyses and compares the performance, and system impairments, in a DWDM system at data transmission rates of 2.5 Gb/s and 10 Gb/s per wavelength channel. The simulation results show that a data transmission rate of 2.5 Gb/s can be successfully transmitted over a greater distance than 10 Gb/s with minimum system impairments. Also operating at the lower data rate delivers a good system performance for the required ICT services. A forty-channel DWDM system will provide a bandwidth of 100 Gb/s. A cost analysis demonstrates the economic worth of incorporating existing optical fibre installations into an optical DWDM network for the creation of an affordable ICT backbone infrastructure; this approach is compared with building a completely new optical fibre DWDM network or a SONET/SDH network. The results show that the ICT backbone infrastructure built with existing SSMF DWDM network technology is a good investment, in terms of profitability, even if the Internet charges are reduced to half current rates. The case for building a completely new optical fibre DWDM network or a SONET/SDH network is difficult to justify using current financial data

    A methodology for obtaining More Realistic Cross-Layer QoS Measurements in mobile networks: A VoIP over LTE Use Case

    Get PDF
    Los servicios de voz han sido durante mucho tiempo la primera fuente de ingresos para los operadores móviles. Incluso con el protagonismo creciente del tráfico de datos, los servicios de voz seguirán jugando un papel importante y no desaparecerán con la transición a redes basadas en el protocolo IP. Por otra parte, hace años que los principales actores en la industria móvil detectaron claramente que los usuarios no aceptarían una degradación en la calidad de los servicios de voz. Es por esto que resulta crítico garantizar la experiencia de usuario (QoE) en la transición a redes de nueva generación basadas en conmutación de paquetes. El trabajo realizado durante esta tesis ha buscado analizar el comportamiento y las dependencias de los diferentes servicios de Voz sobre IP (VoIP), así como identificar configuraciones óptimas, mejoras potenciales y metodologías que permitan asegurar niveles de calidad aceptables al mismo tiempo que se trate de minimizar los costes. La caracterización del rendimiento del tráfico de datos en redes móviles desde el punto de vista de los usuarios finales es un proceso costoso que implica la monitorización y análisis de un amplio rango de protocolos y parámetros con complejas dependencias. Para abordar desde la raíz este problema, se requiere realizar medidas que relacionen y correlen el comportamiento de las diferentes capas. La metodología de caracterización propuesta en esta tesis proporciona la posibilidad de recoger información clave para la resolución de problemas en las comunicaciones IP, relaciolándola con efectos asociados a la propagación radio, como cambios de celda o pérdida de enlaces, o con carga de la red y limitaciones de recursos en zonas geográficas específicas. Dicha metodología se sustenta en la utilización de herramientas nativas de monitorización y registro de información en smartphones, y la aplicación de cadenas de herramientas para la experimentación extensiva tanto en redes reales y como en entornos de prueba controlados. Con los resultados proporcionados por esta serie de herramientas, tanto operadores móviles y proveedores de servicio como desarrolladores móviles podrían ganar acceso a información sobre la experiencia real del usuario y sobre cómo mejorar la cobertura, optimizar los servicios y adaptar el funcionamiento de las aplicaciones y el uso de protocolos móviles basados en IP en este contexto. Las principales contribuciones de las herramientas y métodos introducidos en esta tesis son los siguientes: - Una herramienta de monitorización multicapa para smartphones Android, llamada TestelDroid, que permite la captura de indicadores clave de rendimiento desde el propio equipo de usuario. Asimismo proporciona la capacidad de generar tráfico de forma activa y de verificar el estado de alcanzabilidad del terminal, realizando pruebas de conectividad. - Una metodología de post-procesado para correlar la información presente en las diferentes capas de las medidas realizadas. De igual forma, se proporciona la opción a los usuarios de acceder directamente a la información sobre el tráfico IP y las medidas radio y de aplicar metodologías propias para la obtención de métricas. - Se ha realizado la aplicación de la metodología y de las herramientas usando como caso de uso el estudio y evaluación del rendimiento de las comunicaciones basadas en IP a bordo de trenes de alta velocidad. - Se ha contribuido a la creación de un entorno de prueba realista y altamente configurable para la realización de experimentos avanzados sobre LTE. - Se han detectado posibles sinergias en la utilización de instrumentación avanzada de I+D en el campo de las comunicaciones móviles, tanto para la enseñanza como para la investigación en un entorno universitario

    Characterization of wavelength tunable lasers for use in wavelength packet switched networks

    Get PDF
    The telecom industry's greatest challenge, and the optical systems and components vendors' biggest opportunity is enabling providers to expand their data services. The solution lies in making optical networks more responsive to customer needs, i.e., making them more rapidly adaptable. One possible technique to achieve this is to employ wavelength tunable optical transmitters. The importance of tunability grows greater every year, as the average number of channels deployed on DWDM platforms increases. By deploying tunable lasers it is much easier to facilitate forecasting, planning and last minute changes in the network. This technology provides with solution for inventory reduction. It also offers solution for fast switching at packet level. The conducted research activities of the project was divided in two work packages: 1. Full static characterization-the laser used in the experiment was a butterfly-packaged Sampled Grating DBR laser with four electrically tunable sections. LabView programme was developed for distant control of the equipment and the laser itself. The parameters required for creating a look-up table with the exact currents for the four sections of the laser, namely wavelength, side mode suppression ratio and output power, were transferred to tables. Based on those tables the currents were defined for each of the 96 different accessible channels. The channel allocation is based on the 50 GHz spacing grid. A detailed analysis of the tuning mechanisms is provided. 2. Dynamic characterization and BER performance in wavelength packet switched WDM systems-a commercially available module was used supplied with the software package for controlling the wavelength channels and setting the laser to switch between any accessible channel. The laser is DBR laser without SOA integration so the dynamic tunability can be investigated. As the switching in the nanosecond regime is executed in the electrical domain, analysis of the switching parameters concerning the electrical circuit as well as laser structure is provided. The actual switching time was defined. The degradation in system performance due to spurious wavelength signals emitted from the tunable module during the switching event and their interference with other active channels was demonstrated by examining the presence of an error floor in the BER rate against received power measurements
    corecore