A review of modelling and analysis of morphing wings

Morphing wings have a large potential to improve the overall aircraft performances, in a way like natural flyers do. By adapting or optimising dynamically the shape to various flight conditions, there are yet many unexplored opportunities beyond current proof-of-concept demonstrations. This review discusses the most prominent examples of morphing concepts with applications to two and three-dimensional wing models. Methods and tools commonly deployed for the design and analysis of these concepts are discussed, ranging from structural to aerodynamic analyses, and from control to optimisation aspects. Throughout the review process, it became apparent that the adoption of morphing concepts for routine use on aerial vehicles is still scarce, and some reasons holding back their integration for industrial use are given. Finally, promising concepts for future use are identified

The micro-air-vehicle Golden Snitch and its figure-of-8 flapping

[[abstract]]Relaxing from the conventional regarding of the rigid flapping mechanism, in this review paper the author introduced flexible wing frames for micro-air-vehicles (MAVs) with the wing span of 20 cm at Tamkang University. The constructed flappingMAVGolden Snitch with a smallest body mass of 5.9 g created a successful 107 s flight record with a four-bar linkage driving mechanism in 2008. Augmented by the precision injection molding (PIM) manufacture, the almost polymer-made MAV with the modified driving mechanism increases the flight endurance up to 480 s in 2010. Via high speed photography, the author has ever found the wing-tip trajectory as an oblique figure-of-8 which composes the original up-and-down flapping and the induced coherent streamwise vibration while the wingbeat frequency being about 10-25 Hz. The time-averaged lift, thrust coefficients and the structure aging of MAVs have been investigated to mention the corresponding influence. This figure-of-8 was done by the aero-elastic interactive nature as well as the symmetry-breaking of a simple flapping system. The bifurcation (duality) phenomenon of the oblique figure-of-8 was shown. How the rigidity of the flexible wing frame influences the flapping appearance was also addressed qualitatively. The flexible MAVs exhibited the peculiar figure-of-8 away from the conventional domain of MAVs by the perspective of scaling laws. Some remaining technical issues or future works of the figure-of-8 flapping were summarized finally.[[notice]]補正完畢[[journaltype]]國內[[incitationindex]]EI[[ispeerreviewed]]Y[[booktype]]紙本[[countrycodes]]TW

Can scalable design of wings for flapping wing micro air vehicle be inspired by natural flyers?

Lift production is constantly a great challenge for flapping wing micro air vehicles (MAVs). Designing a workable wing, therefore, plays an essential role. Dimensional analysis is an effective and valuable tool in studying the biomechanics of flyers. In this paper, geometric similarity study is firstly presented. Then, the pw−AR ratio is defined and employed in wing performance estimation before the lumped parameter is induced and utilized in wing design. Comprehensive scaling laws on relation of wing performances for natural flyers are next investigated and developed via statistical analysis before being utilized to examine the wing design. Through geometric similarity study and statistical analysis, the results show that the aspect ratio and lumped parameter are independent on mass, and the lumped parameter is inversely proportional to the aspect ratio. The lumped parameters and aspect ratio of flapping wing MAVs correspond to the range of wing performances of natural flyers. Also, the wing performances of existing flapping wing MAVs are examined and follow the scaling laws. Last, the manufactured wings of the flapping wing MAVs are summarized. Our results will, therefore, provide a simple but powerful guideline for biologists and engineers who study the morphology of natural flyers and design flapping wing MAVs

Fast aquatic escape with a jet thruster

The ability to collect water samples rapidly with aerial–aquatic robots would increase the safety and efficiency of water health monitoring and allow water sample collection from dangerous or inaccessible areas. An aquatic micro air vehicle (AquaMAV) able to dive into the water offers a low cost and robust means of collecting samples. However, small-scale flying vehicles generally do not have sufficient power for transition to flight from water. In this paper, we present a novel jet propelled AquaMAV able to perform jumpgliding leaps from water and a planar trajectory model that is able to accurately predict aquatic escape trajectories. Using this model, we are able to offer insights into the stability of aquatic takeoff to perturbations from surface waves and demonstrate that an impulsive leap is a robust method of flight transition. The AquaMAV uses a CO 2 powered water jet to escape the water, actuated by a custom shape memory alloy gas release. The 100 g robot leaps from beneath the surface, where it can deploy wings and glide over the water, achieving speeds above 11 m/s

Proceedings of the International Micro Air Vehicles Conference and Flight Competition 2017 (IMAV 2017)

The IMAV 2017 conference has been held at ISAE-SUPAERO, Toulouse, France from Sept. 18 to Sept. 21, 2017. More than 250 participants coming from 30 different countries worldwide have presented their latest research activities in the field of drones. 38 papers have been presented during the conference including various topics such as Aerodynamics, Aeroacoustics, Propulsion, Autopilots, Sensors, Communication systems, Mission planning techniques, Artificial Intelligence, Human-machine cooperation as applied to drones

Design optimization and wind tunnel investigation of a flapping system based on the flapping wing trajectories of a beetle's hindwings

To design a flapping-wing micro air vehicle (FWMAV), the hovering flight action of a beetle species (Protaetia brevitarsis) was captured, and various parameters, such as the hindwing flapping frequency, flapping amplitude, angle of attack, rotation angle, and stroke plane angle, were obtained. The wing tip trajectories of the hindwings were recorded and analyzed, and the flapping kinematics were assessed. Based on the wing tip trajectory functions, bioinspired wings and a linkage mechanism flapping system were designed. The critical parameters for the aerodynamic characteristics were investigated and optimized by means of wind tunnel tests, and the artificial flapping system with the best wing parameters was compared with the natural beetle. This work provides insight into how natural flyers execute flight by experimentally duplicating beetle hindwing kinematics and paves the way for the future development of beetle-mimicking FWMAVs

An overview of key technology thrusts at Bell Helicopter Textron

Insight is provided into several key technologies at Bell. Specific topics include the results of ongoing research and development in advanced rotors, methodology development, and new configurations. The discussion on advanced rotors highlight developments on the composite, bearingless rotor, including the development and testing of full scale flight hardware as well as some of the design support analyses and verification testing. The discussion on methodology development concentrates on analytical development in aeromechanics, including correlation studies and design application. New configurations, presents the results of some advanced configuration studies including hardware development

Design and Control of Flapping Wing Micro Air Vehicles

Flapping wing Micro Air Vehicles (MAVs) continues to be a growing field, with ongoing research into unsteady, low Re aerodynamics, micro-fabrication, and fluid-structure interaction. However, research into flapping wing control of such MAVs continues to lag. Existing research uniformly consists of proposed control laws that are validated by computer simulations of quasi-steady blade-element formulae. Such simulations use numerous assumptions and cannot be trusted to fully describe the flow physics. Instead, such control laws must be validated on hardware. Here, a novel control technique is proposed called Bi-harmonic Amplitude and Bias Modulation (BABM) which can generate forces and moments in 5 vehicle degrees of freedom with only two actuators. Several MAV prototypes were designed and manufactured with independently controllable wings capable of prescribing arbitrary wing trajectories. The forces and moments generated by a MAV utilizing the BABM control technique were measured on a 6-component balance. These experiments verified that a prototype can generate uncoupled forces and moments for motion in five degrees of freedom when using the BABM control technique, and that these forces can be approximated by quasi-steady blade-element formulae. Finally, the prototype performed preliminary controlled flight in constrained motion experiments, further demonstrating the feasibility of BABM

Development of a F.W.M.A.V. with livestreaming capabilities

N/

Closed-Loop Control of Constrained Flapping Wing Micro Air Vehicles

Micro air vehicles are vehicles with a maximum dimension of 15 cm or less, so they are ideal in confined spaces such as indoors, urban canyons, and caves. Considerable research has been invested in the areas of unsteady and low Reynolds number aerodynamics, as well as techniques to fabricate small scale prototypes. Control of these vehicles has been less studied, and most control techniques proposed have only been implemented within simulations without concern for power requirements, sensors and observers, or actual hardware demonstrations. In this work, power requirements while using a piezo-driven, resonant flapping wing control scheme, Bi-harmonic Amplitude and Bias Modulation, were studied. In addition, the power efficiency versus flapping frequency was studied and shown to be maximized while flapping at the piezo-driven system\u27s resonance. Then prototype hardware of varying designs was used to capture the impact of a specific component of the flapping wing micro air vehicle, the passive rotation joint. Finally, closed-loop control of different constrained configurations was demonstrated using the resonant flapping Bi-harmonic Amplitude and Bias Modulation scheme with the optimized hardware. This work is important in the development and understanding of eventual free-flight capable flapping wing micro air vehicle