EVALUATION TO PRODUCTION PERFORMANCE CONSIDERING DEPARTMENTS DISTANCE AND ROUTE TIME USING SIMULATION WITH ARENA

This study is about the application of a simulation model to assist performance evaluation of production considering departments distance and route time by using empirical data on a shoe-making industry. The existing condition is composed of 3 main parts which are processed into 9 departments of production. Departments 1st – 5th are a fabrication process, Departments 6th – 7th are the assembling process 1st and 2nd, Department 8th is the process of packing, and the department 9th is the inspection/Quality Control process. The three components through different fabrication processes, and the time between arrival meet to exponential distribution with an average of 13 minutes. Percentage of arrival for each component was 26% for parts A, 48% for part B, and 26% for part C. Key words: simulation, departments distance, route time

A framework for analysing the adoption of New Zealand pastoral farming systems in central Veracruz State, Mexico : a thesis presented in partial fulfilment of the requirements for the degree of Master of Agricultural Science in Farm Management at Massey University

Tropical areas of developing countries have significant potential for increased food production. In the case of Mexico, an important economic activity in the tropics is livestock production based on pasture. Tropical regions represent 25% of the total area of Mexico and support more than 50% of the country's cow production. Historically, however, animal production in Mexican, and other tropical areas, has been low. Low pasture utilisation, and associated poor herbage quality, is one factor that contributes to poor animal performance in the tropics. This situation contrasts with the success of New Zealand pastoral systems, which in comparative terms have been able to obtain high levels of animal production and efficient use of pasture. Differences in pasture productivity (both in quality and quantity) and social and economic conditions between the Mexican tropics and New Zealand are large. Nevertheless it was proposed that some of the pastoral farming methods used in New Zealand, could be adapted to the conditions of tropical farmers in Mexico, particularly in relation to effective planning and control of the farming system. To test this hypothesis, the consequences of implementing some of New Zealand's pastoral farming techniques under tropical conditions in Central Veracruz State were explored by developing a spreadsheet model to simulate local farming systems. The model included linked submodels for pasture growth and quality, livestock transactions, milk production and enterprise gross margins. The effect of improved farming systems of milk output and cash returns were evaluated relative to the average levels of performance currently achieved from a medium-sized farm in the Central region of Veracruz State in Mexico. Straight forward changes in the design of the farming system, such as synchronising calving with the pattern of pasture growth rather than year-round calving, would significantly affect milk production and cash returns to the farm family. The modelling process was seriously constrained by the lack of farm-level data on pasture production and animal performance. Nevertheless, the model framework clearly identifies which data should be collected, and priority should now be given to assembling these data so simulation decision support models such as that developed in this study, can be effectively used to plan improved farming systems. Keywords: tropical agricultural, Mexico, farming systems, spreadsheet model

Development of a novel 3D simulation modelling system for distributed manufacturing

This paper describes a novel 3D simulation modelling system for supporting our distributed machine design and control paradigm with respect to simulating and emulating machine behaviour on the Internet. The system has been designed and implemented using Java2D and Java3D. An easy assembly concept of drag-and-drop assembly has been realised and implemented by the introduction of new connection features (unified interface assembly features) between two assembly components (modules). The system comprises a hierarchical geometric modeller, a behavioural editor, and two assemblers. During modelling, designers can combine basic modelling primitives with general extrusions and integrate CAD geometric models into simulation models. Each simulation component (module) model can be visualised and animated in VRML browsers. It is reusable. This makes machine design re-configurable and flexible. A case study example is given to support our conclusions

The Simulated Process of a Production System using the Extend Program

With the help of the simulated process, it could be realized all kind of experiments on a model. It could be tested lots of ideas, a returning in time to make possible remaking of manipulation scripts of some key variables with the purpose of observation based on experiments the effect above some important indicators of performances.production system, simulation, indicators, optimization

Composition laws for learning curves of industrial manufacturingprocesses

The theory of learning curves is widely investigated in many fields related to production planning, quality improvement and cost analysis. Many different approaches to describe the learning mechanism of a process are reported in the academic literature. The aim is to analyse the behaviour of complex systems composed of a network of elementary processes whose learning curve is known. Composition laws of two basic aggregation structures, series and parallel, are discussed and analysed. The effects of these composition laws are shown in a series of practical examples

Self-Assembling of Networks in an Agent-Based Model

We propose a model to show the self-assembling of network-like structures between a set of nodes without using preexisting positional information or long-range attraction of the nodes. The model is based on Brownian agents that are capable of producing different local (chemical) information and respond to it in a non-linear manner. They solve two tasks in parallel: (i) the detection of the appropriate nodes, and (ii) the establishment of stable links between them. We present results of computer simulations that demonstrate the emergence of robust network structures and investigate the connectivity of the network by means of both analytical estimations and computer simulations. PACS: 05.65.+b, 89.75.Kd, 84.30.Bv, 87.18.SnComment: 10 pages, 8 figures. A video of the computer simulations can be found at http://www.ais.fhg.de/~frank/network.html. After publication, this paper was also included in: Virtual Journal of Biological Physics Research 4/5 (September 1, 2002) and Virtual Journal of Nanoscale Science & Technology 6/10 (September 2, 2002). For related work, see also http://www.ais.fhg.de/~frank/active.htm

Survey instrument for measuring level of preparedness amongst healthcare personnel in radiation emergency

Drills and exercises are globally practiced to investigate the level of preparedness towards disaster events. However, these activities are rarely conducted because they require substantial investment, specifically to budget and time. A self-reported survey may serve as an alternative approach, although it may not be as effective as drills and exercises. As part of the survey development process, this article discusses preliminary validation of a survey instrument to measure the level of preparedness towards radiation emergency amongst healthcare personnel. Prior to this validation process, extensive literature reviews pointed out that the instrument consists of three constructs of preparedness, namely readiness, willingness, and ability. A total of seven subject matter experts were invited to judge the contents for verification purposes. Randolph Kappa analysis was then conducted to analyse their judgment to allow irrelevant items to be filtered from the rest prior to any improvements. Initially, the survey instrument consisted of 69 items; however, the analysis omitted 16 of them. The following values for each preparedness construct were: Readiness (0.77), Willingness (0.70), and Ability (0.73). These findings indicate that contents of the instrument are valid. Further analysis should be fulfilled to complete validation process to ensure its practicality prior to using it as an evaluation tool

A hybrid CFGTSA based approach for scheduling problem: a case study of an automobile industry

In the global competitive world swift, reliable and cost effective production subject to uncertain situations, through an appropriate management of the available resources, has turned out to be the necessity for surviving in the market. This inspired the development of the more efficient and robust methods to counteract the existing complexities prevailing in the market. The present paper proposes a hybrid CFGTSA algorithm inheriting the salient features of GA, TS, SA, and chaotic theory to solve the complex scheduling problems commonly faced by most of the manufacturing industries. The proposed CFGTSA algorithm has been tested on a scheduling problem of an automobile industry, and its efficacy has been shown by comparing the results with GA, SA, TS, GTS, and hybrid TSA algorithms