Towards Terabit LiFi Networking

Light Fidelity (Li-Fi) is a networked version of optical wireless communication (OWC), which is a strong candidate to fulfill the unprecedented increase in user-traffic expected in the near future. In OWC, a high number of optical access points (APs) is usually deployed on the ceiling of an indoor environment to serve multiple users with different demands. Despite the high data rates of OWC networks, due to the use of the optical band for data transmission, they cannot replace current radio frequency (RF) wireless networks where OWC has several issues including the small converge area of an optical AP, the lack of uplink transmission and high blockage probabilities. However, OWC has the potential to support the requirements in the next generation (6G) of wireless communications. In this context, heterogeneous optical/RF networks can be considered to overcome the limitations of OWC and RF systems, while providing a high quality of service in terms of achievable data rates and coverage . In this work, infrared lasers, vertical-cavity surface-emitting(VCSEL) lasers, are used as the key elements of optical APs for serving multiple users. Then, transmission schemes such as zero forcing (ZF) and blind interference alignment (BIA) are introduced to manage multi-user interference and maximize the sum rate of users. Moreover, a WiFi system is considered to provide uplink transmission and serve users that experience a low signal to noise ratio (SNR) from the optical system. To use the resources of the heterogeneous optical/RF network efficiently, we derive a utility-based objective function that aims to maximize the overall sum rate of the network. This complex problem can be solved using distributed algorithms to provide sub-optimal solutions with low complexity. The results show that the sum rate of the proposed hybrid network is higher than the standalone optical network, using different transmission schemes

Introduction to indoor networking concepts and challenges in LiFi

LiFi is networked, bidirectional wireless communication with light. It is used to connect fixed and mobile devices at very high data rates by harnessing the visible light and infrared spectrum. Combined, these spectral resources are 2600 times larger than the entire radio frequency (RF) spectrum. This paper provides the motivation behind why LiFi is a very timely technology, especially for 6th generation (6G) cellular communications. It discusses and reviews essential networking technologies, such as interference mitigation and hybrid LiFi/Wi-Fi networking topologies. We also consider the seamless integration of LiFi into existing wireless networks to form heterogeneous networks across the optical and RF domains and discuss implications and solutions in terms of load balancing. Finally, we provide the results of a real-world hybrid LiFi/Wi-Fi network deployment in a software defined networking testbed. In addition, results from a LiFi deployment in a school classroom are provided, which show that Wi-Fi network performance can be improved significantly by offloading traffic to the LiFi

Thirty Years of Machine Learning: The Road to Pareto-Optimal Wireless Networks

Future wireless networks have a substantial potential in terms of supporting a broad range of complex compelling applications both in military and civilian fields, where the users are able to enjoy high-rate, low-latency, low-cost and reliable information services. Achieving this ambitious goal requires new radio techniques for adaptive learning and intelligent decision making because of the complex heterogeneous nature of the network structures and wireless services. Machine learning (ML) algorithms have great success in supporting big data analytics, efficient parameter estimation and interactive decision making. Hence, in this article, we review the thirty-year history of ML by elaborating on supervised learning, unsupervised learning, reinforcement learning and deep learning. Furthermore, we investigate their employment in the compelling applications of wireless networks, including heterogeneous networks (HetNets), cognitive radios (CR), Internet of things (IoT), machine to machine networks (M2M), and so on. This article aims for assisting the readers in clarifying the motivation and methodology of the various ML algorithms, so as to invoke them for hitherto unexplored services as well as scenarios of future wireless networks.Comment: 46 pages, 22 fig

Lights and Shadows: A Comprehensive Survey on Cooperative and Precoding Schemes to Overcome LOS Blockage and Interference in Indoor VLC

Visible light communications (VLC) have received significant attention as a way of moving part of the saturated indoor wireless traffic to the wide and unregulated visible optical spectrum. Nowadays, VLC are considered as a suitable technology, for several applications such as high-rate data transmission, supporting internet of things communications or positioning. The signal processing originally derived from radio-frequency (RF) systems such as cooperative or precoding schemes can be applied to VLC. However, its implementation is not straightforward. Furthermore, unlike RF transmission, VLC present a predominant line-of-sight link, although a weak non-LoS component may appear due to the reflection of the light on walls, floor, ceiling and nearby objects. Blocking effects may compromise the performance of the aforementioned transmission schemes. There exist several surveys in the literature focused on VLC and its applications, but the management of the shadowing and interference in VLC requires a comprehensive study. To fill this gap, this work introduces the implementation of cooperative and precoding schemes to VLC, while remarking their benefits and drawbacks for overcoming the shadowing effects. After that, the combination of both cooperative and precoding schemes is analyzed as a way of providing resilient VLC networks. Finally, we propose several open issues that the cooperative and precoding schemes must face in order to provide satisfactory VLC performance in indoor scenarios.This work has been supported partially by Spanish National Project TERESA-ADA(TEC2017-90093-C3-2-R) (MINECO/AEI/FEDER, UE), the research project GEOVEOLUZ-CM-UC3Mfunded by the call “Programa de apoyo a la realización de proyectos interdisciplinares de I+D parajóvenes investigadores de la Universidad Carlos III de Madrid 2019-2020” under the frame ofthe Convenio Plurianual Comunidad de Madrid-Universidad Carlos III de Madrid and projectMadrid Flight on Chip (Innovation Cooperative Projects Comunidad of Madrid - HUBS 2018/MadridFlightOnChip). Additionally, it has been supported partially by the Juan de la CiervaIncorporación grant IJC2019-040317-I and Juan de la Cierva Formación grant (FJC2019-039541-I/AEI/10.13039/501100011033)

Coexistence of directional and non-directional technologies in 6G wireless dense networks

Dense networks are characterized by the prevalence of wireless access points (APs) in close proximity to a population of user devices on a similar scale. By increasing AP density, the aggregate data consumption of a system can be dramatically increased. In this dissertation we consider dense deployment of directional visible light APs. Firstly, we analyze the performance of a visible light communication (VLC) link and propose algorithmic methods as well as novel receiver structures to enhance its quality. Secondly, we study handover algorithms and investigate an AP placement strategy that ties to the system outage probability. Thirdly, we use a geometric model for an indoor space and a reference optical channel model to formulate an optimization problem that proposes a dynamic field of view (FOV) receiver with a goal of optimizing receiver FOV for maximum signal to noise ratio (SNR). From the promising results we get, we then propose the dynamic FOV technique with receiver tracking capability. Its results show an average SNR increase of up to 40% when compared to a fixed FOV receiver. These results motivate the adoption of dynamic pointing and adaptive FOV at the receiver in order to realize improved performance for mobile devices in an optical wireless dense network. This opts us to study interference in VLC systems and how to mitigate it using our proposed receivers. In the context of multi-user networks, we formulate two main novel optimization problems i) a joint optimization of transmit emission pattern and transmit power while satisfying illumination requirements and ii) an optimization to allocate users, balance the network load and optimize device FOV for best performance. We then evaluate the effect of self-blockage as well as random human blockers on our proposed receivers. Finally, we propose to deploy the VLC system in a hybrid setting of other technologies to evaluate the overall system performance for future 6G networks.2022-01-17T00:00:00

Optical Wireless Data Center Networks

Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption. To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer). Advisors: Jitender S. Deogun and Dennis R. Alexande

Diseño de prototipo Li-Fi para proveer servicios de comunicación en ambientes universitarios

Las comunicaciones digitales están en constante evolución lo que plantea la necesidad de utilizar nuevos métodos y técnicas que ayuden a mitigar el rendimiento de servicios hacia el usuario. Por ello este proyecto plantea la tecnología Li-Fi en donde las transmisiones y recepciones se realizan haciendo uso de la luz. Por tanto, el proyecto tiene por objetivo diseñar un prototipo Li-Fi para proveer servicios de comunicación en ambientes universitarios. Se pretende diseñar y construir un un prototipo que cuente con requisitos primordiales de seguridad y conectividad, basado en transmisor LED y recepción con fotodiodo o panel solar. En el cuerpo del documento se puede encontrar la investigación sobre la tecnología Li-Fi que explica, funcionamiento, características, estado de desarrollo, implementaciones existentes. Además, se identifican estudios e investigaciones de factibilidad y beneficios sobre el funcionamiento de esta, dentro de los ambientes universitarios como son playa de estacionamiento y laboratorios.Campus Arequip