Selection of the key earth observation sensors and platforms focusing on applications for Polar Regions in the scope of Copernicus system 2020-2030

An optimal payload selection conducted in the frame of the H2020 ONION project (id 687490) is presented based on the ability to cover the observation needs of the Copernicus system in the time period 2020–2030. Payload selection is constrained by the variables that can be measured, the power consumption, and weight of the instrument, and the required accuracy and spatial resolution (horizontal or vertical). It involved 20 measurements with observation gaps according to the user requirements that were detected in the top 10 use cases in the scope of Copernicus space infrastructure, 9 potential applied technologies, and 39 available commercial platforms. Additional Earth Observation (EO) infrastructures are proposed to reduce measurements gaps, based on a weighting system that assigned high relevance for measurements associated to Marine for Weather Forecast over Polar Regions. This study concludes with a rank and mapping of the potential technologies and the suitable commercial platforms to cover most of the requirements of the top ten use cases, analyzing the Marine for Weather Forecast, Sea Ice Monitoring, Fishing Pressure, and Agriculture and Forestry: Hydric stress as the priority use cases.Peer ReviewedPostprint (published version

The proof of concept for 3-cm Altimetry using the Paris Interferometric Technique

© 2010 IEEE. Reprinted, with permission, from Nogués, O., Ribó, S., Arco, J. C., Cardellach, E., Rius, A., València, E., A. Camps, van der Marel, H., Martín-Neira, M., The proof of concept for 3-cm altimetry using the PARIS interferometric technique, Proceedings of IEEE International Geoscience and Remote Sensing Symposium (IEEE IGARSS), and july/2010. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of CSIC products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.Peer reviewe

First results of a GNSS-R experiment from a stratospheric balloon over boreal forests

The empirical results of a global navigation satellite systems reflectometry (GNSS-R) experiment onboard the Balloon EXperiments for University Students (BEXUS) 17 stratospheric balloon performed north of Sweden over boreal forests show that the power of the reflected signals is nearly independent of the platform height for a high coherent integration time T-c = 20 ms. This experimental evidence shows a strong coherent component in the forward scattered signal, as compared with the incoherent component, that allows to be tracked. The bistatic coherent reflectivity is also evaluated as a function of the elevation angle, showing a decrease of similar to 6 dB when the elevation angle increases from 35. to 70 degrees. The received power presents a clearly multimodal behavior, which also suggests that the coherent scattering component may be taking place in different forest elements, i.e., soil, canopy, and through multiple reflections canopy-soil and soil-trunk. This experiment has provided the first GNSS-R data set over boreal forests. The evaluation of these results can be useful for the feasibility study of this technique to perform biomass monitoring that is a key factor to analyze the carbon cycle.Peer ReviewedPostprint (author's final draft

A generic level 1 simulator for spaceborne GNSS-R missions and application to GEROS-ISS ocean reflectometry

©2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.In the past decade Global Navigation Satellites System Reflectometry (GNSS-R) has emerged as a new technique for earth remote sensing for various applications, such as ocean altimetry and sea state monitoring. After the success of the GNSS-R demonstrator payloads aboard the UK-DMC or TDS-1 satellites; at present, there are several missions planned to carry GNSS reflectometers. The GNSS rEflectometry, Radio Occultation, and Scatterometry onboard International Space Station (GEROS-ISS) is an innovative ISS experiment exploiting GNSS-R technique to measure key parameters of ocean, land, and ice surfaces. For GEROS-ISS mission, the European Space Agency (ESA) supported the study of GNSS-R assessment of requirements and consolidation of retrieval algorithms (GARCA). For this, it was required to accurately simulate the GEROS-ISS measurements including the whole range of parameters affecting the observation conditions and the instrument, which is called GEROS-SIM. To meet these requirements, the PAU/PARIS end-to-end performance simulator (P$^{2}$EPS) previously developed by UPC BarcelonaTech was used as the baseline building blocks for the level 1 (L1) processor of GEROS-SIM. P$^{2}$EPS is a flexible tool, and is capable of systematically simulating the GNSS-R observations for spaceborne GNSS-R missions. Thanks to the completeness and flexibility, the instrument-to-L1 data module of GEROS-SIM could be implemented by proper modification and update of P$^{2}$EPS. The developed GEROS-SIM was verified and validated in the GARCA study as comparing to the TDS-1 measurements. This paper presents the design, implementation, and results of the GEROS-SIM L1 module in a generic way to be applied to GNSS-R instruments.Peer ReviewedPostprint (author's final draft

Spaceborne GNSS-Reflectometry for ocean winds: First results from the UK TechDemoSat-1 mission

First results are presented for ocean surface wind speed retrieval from reflected GPS signals measured by the Low-Earth-Orbiting UK TechDemoSat-1 satellite (TDS-1). Launched in July 2014, TDS-1 provides the first new spaceborne Global Navigation Satellite System-Reflectometry (GNSS-R) data since the pioneering UK-Disaster Monitoring Mission experiment in 2003. Examples of onboard-processed delay Doppler Maps reveal excellent data quality for winds up to 27.9 m/s. Collocated ASCAT scatterometer winds are used to develop and evaluate a wind speed algorithm based on Signal-to-Noise ratio (SNR) and the Bistatic Radar Equation. For SNR greater than 3 dB, wind speed is retrieved without bias and a precision around 2.2 m/s between 3–18 m/s even withoutcalibration. Exploiting lower SNR signals however requires good knowledge of the antenna beam, platform attitude and instrument gain setting. This study demonstrates the capabilities of low-cost, low-mass, low-power GNSS-R receivers ahead of their launch on the NASA CYGNSS constellation in 2016

First spaceborne observation of sea surface height using GPS-reflectometry

An analysis of spaceborne Global Positioning System reflectometry (GPS-R) data from the TechDemoSat-1 (TDS-1) satellite is carried out to image the ocean sea surface height (SSH). An SSH estimation algorithm is applied to GPS-R delay waveforms over two regions in the South Atlantic and the North Pacific. Estimates made from TDS-1 overpasses during a 6 month period are aggregated to produce SSH maps of the two regions. The maps generally agree with the global DTU10 mean sea surface height. The GPS-R instrument is designed to make bistatic measurements of radar cross section for ocean wind observations, and its altimetric performance is not optimized. The differences observed between measured and DTU10 SSH can be attributed to limitations with the GPS-R instrument and the lack of precision orbit determination by the TDS-1 platform. These results represent the first observations of SSH by a spaceborne GPS-R instrument

Contributions to GNSS-R earth remote sensing from nano-satellites

Premi extraordinari doctorat UPC curs 2015-2016, àmbit de CiènciesGlobal Navigation Satellite Systems Reflectometry (GNSS-R) is a multi-static radar using navigation signals as signals of opportunity. It provides wide-swath and improved spatio-temporal sampling over current space-borne missions. The lack of experimental datasets from space covering signals from multiple constellations (GPS, GLONASS, Galileo, Beidou) at dual-band (L1 and L2) and dual-polarization (Right Hand Left Hand Circular Polarization: RHCP and LHCP), over the ocean, land and cryosphere remains a bottleneck to further develop these techniques. 3Cat-2 is a 6 units (3 x 2 elementary blocks of 10 x 10 x 10 cm3) CubeSat mission ayming to explore fundamentals issues towards an improvement in the understanding of the bistatic scattering properties of different targets. Since geolocalization of specific reflections points is determined by the geometry only, a moderate pointing accuracy is still required to correct for the antena pattern in scatterometry measurements. 3Cat-2 launch is foreseen for the first quarter 2016 into a Sun-Synchronous orbit of 510 km height using a Long March II D rocket. This Ph.D. Thesis represents the main contributions to the development of the 3Cat-2 GNSS-R Earth observation mission (6U CubeSat) including a novel type of GNSS-R technique: the reconstructed one. The desing, development of the platform, and a number of ground-based, airborne and stratospheric balloon experiments to validate the technique and to optimize the instrument. In particular, the main contributions of this Ph.D. thesis are: 1) A novel dual-band Global Navigation Satellite Systems Reflectometer that uses the P(Y) and C/A signals scattered over the sea surface to perform highly precise altimetric measurements (PYCARO). 2) The first proof-of-concept of PYCARO was performed during two different ground-based field experiments over a dam and over the sea under different surface roughness conditions. 3) The scattering of GNSS signals over a water surface has been studied when the receiver is at low height, as for GNSS-R coastal altimetry applications. The precise determination of the local sea level and wave state from the coast can provide useful altimetry and wave information as "dry" tide and wave gauges. In order to test this concept an experiment has been conducted at the Canal d'Investigació i Experimentació Marítima (CIEM) wave channel for two synthetic "sea" states. 4) Two ESA-sponsored airborne experiments were perfomed to test the precision and the relative accuracy of the conventional GNSS-R. 5) The empirical results of a GNSS-R experiment on-board the ESA-sponsored BAXUS 17 stratospheric balloon campaign performed North of Sweden over boreal forests showed that the power of the reflected signals is nearly independent of the platform height for a high coherent integration time. 6) An improved version of the PYCARO payload was tested in Octover 2014 for the second time during the ESA-sposored BEXUS-19,. This work achieved the first ever dual-frequency, multi-constellation GNSS-R observations over boreal forests and lakes using GPS, GLONASS and Galileo signals. 7) The first-ever dual-frequency multi-constellation GNSS-R dual-polarization measurements over boreal forests and lakes were obtained from the stratosphere during the BEXUS 19 using the PYCARO reflectometer operated in closed-loop mode.Global Navigation Satellite Systems Reflectometry (GNSS-R) es una técnica de radar multi-estático que usa señales de radio-navegación como señales de oportunidad. Esta técnica proporciona "wide-swath" y un mejor sampleado espacio-temporal en comparación con las misiones espaciales actuales. La falta de datos desde el espacio proporcionando señales de múltiples constelaciones (GPS, GLONASS, Galileo, Beidou) en doble banda (L1 y L2) y en doble polarización (RHCP y LHCP) sobre océano, tierra y criosfera continua siendo un problema por solucionar. 3Cat-2 es un cubesat de 6 unidades con el objetivo de explorar elementos fundamentales para mejorar el conocimiento sobre el scattering bi-estático sobre diferentes medios dispersores. Dado que la geolocalización de puntos de reflexión específicos está determinada solo por geometría, es necesario un requisito moderado de apuntamiento para corregir el diagrama de antena en aplicaciones de dispersometría. El lanzamiento del 3Cat-2 será en Q2 2016 en una órbitra heliosíncrona usando un cohete Long March II D. Esta tesis representa las contribuciones principales al desarrollo del satélite 3Cat2 para realizar observación de la tierra con GNSS-R incluyendo una nueva técnica: "the reconstructed-code GNSS-R". El diseño, desarrollo de la plataforma y un número de experimentos en tierra, desde avión y desde globo estratosférico para validar la técnica y optimizar el instrumento han sido realizados. En particular, las contribuciones de esta Ph.D. son: 1) un novedoso Global Navigation Satellite Systems Reflectometer que usa las señales P(Y) y C/A después de ser dispersadas sobre la superficie del mar para realizar medidas altimétricas muy precisas. (PYCARO). 2) La primera prueba de concepto de PYCARO se hizo en dos experimentos sobre un pantano y sobre el mar bajo diferentes condiciones de rugosidad. 3) La disperión de las señales GNSS sobre una superfice de agua ha sido estudiada para bajas altitudes para aplicaciones GNSS-R altimétricas de costa. La determinación precisa del nivel local del mar y el estado de las olas desde la costa puede proporcionar información útil de altimetría e información de olas. Para hacer un test de este concepto un experimento en el Canal d'Investigació i Experimentació Marítima (CIEM) fue realizado para dos estados sintéticos de rugosidad. 4) Dos experimentos en avión con esponsor de la ESA se realizaron para estudiar la preción y la exactitud relativa de cGNSS-R. 5) Los resultados empíricos del experimento GNSS-R en BEXUS 17 con esponsor de la ESA realizado en el norte de Suecia sobre bosques boreales mostró que la potencia reflejada de las señales es independiente de la altitud de la plataforma para un tiempo de integración coherente muy alto. 6) Una versión mejorada del PYCARO fue testeada en octubre del 2014 por segunda vez durante el BEXUS 19 que también fue patrocidado por la ESA. Este trabajo proporcionó las primeras medidas GNSS-R sobre bosques boreales en doble frecuencia usando varias constelaciones GNSS. 7) Las primeras medidas polarimétricas (RHCP y LHCP) de GNSS-R sobre bosques boreales también fueron conseguidas durante el experimento BEXUS 19.Award-winningPostprint (published version

The Impact of Inter-Modulation Components on Interferometric GNSS-Reflectometry

The interferometric Global Navigation Satellite System Reflectometry (iGNSS-R) exploits the full spectrum of the transmitted GNSS signal to improve the ranging performance for sea surface height applications. The Inter-Modulation (IM) component of the GNSS signals is an additional component that keeps the power envelope of the composite signals constant. This extra component has been neglected in previous studies on iGNSS-R, in both modelling and instrumentation. This letter takes the GPS L1 signal as an example to analyse the impact of the IM component on iGNSS-R ocean altimetry, including signal-to-noise ratio, the altimetric sensitivity and the final altimetric precision. Analytical results show that previous estimates of the final altimetric precision were underestimated by a factor of 1 . 5 ∼ 1 . 7 due to the negligence of the IM component, which should be taken into account in proper design of the future spaceborne iGNSS-R altimetry missions.This work was supported in part by the European Space Agency (ESTEC RFP/IPL- PTE/FE/yc/1157/2015) and in part by the Spanish Ministry of Economy and Competitiveness (ESP2015-70014-C2-2-R). We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)

Altimetry for the future: Building on 25 years of progress

In 2018 we celebrated 25 years of development of radar altimetry, and the progress achieved by this methodology in the fields of global and coastal oceanography, hydrology, geodesy and cryospheric sciences. Many symbolic major events have celebrated these developments, e.g., in Venice, Italy, the 15th (2006) and 20th (2012) years of progress and more recently, in 2018, in Ponta Delgada, Portugal, 25 Years of Progress in Radar Altimetry. On this latter occasion it was decided to collect contributions of scientists, engineers and managers involved in the worldwide altimetry community to depict the state of altimetry and propose recommendations for the altimetry of the future. This paper summarizes contributions and recommendations that were collected and provides guidance for future mission design, research activities, and sustainable operational radar altimetry data exploitation. Recommendations provided are fundamental for optimizing further scientific and operational advances of oceanographic observations by altimetry, including requirements for spatial and temporal resolution of altimetric measurements, their accuracy and continuity. There are also new challenges and new openings mentioned in the paper that are particularly crucial for observations at higher latitudes, for coastal oceanography, for cryospheric studies and for hydrology. The paper starts with a general introduction followed by a section on Earth System Science including Ocean Dynamics, Sea Level, the Coastal Ocean, Hydrology, the Cryosphere and Polar Oceans and the ‘‘Green” Ocean, extending the frontier from biogeochemistry to marine ecology. Applications are described in a subsequent section, which covers Operational Oceanography, Weather, Hurricane Wave and Wind Forecasting, Climate projection. Instruments’ development and satellite missions’ evolutions are described in a fourth section. A fifth section covers the key observations that altimeters provide and their potential complements, from other Earth observation measurements to in situ data. Section 6 identifies the data and methods and provides some accuracy and resolution requirements for the wet tropospheric correction, the orbit and other geodetic requirements, the Mean Sea Surface, Geoid and Mean Dynamic Topography, Calibration and Validation, data accuracy, data access and handling (including the DUACS system). Section 7 brings a transversal view on scales, integration, artificial intelligence, and capacity building (education and training). Section 8 reviews the programmatic issues followed by a conclusion