Techniques, Circuits and Devices for Noncontact Sensing through Wireless Coupling

Le tecnologie per la misurazione di grandezze fisiche senza contatto sono diventate sempre più centrali in vari settori, che vanno dal monitoraggio industriale alle applicazioni sanitarie. In questo contesto, la tesi si concentra sullo sviluppo e l'implementazione di tecniche innovative, circuiti elettronici e dispositivi per la rilevazione senza contatto. L’analisi presentata all'interno di questa tesi considera lo scenario del rilevamento senza contatto a distanza nel campo elettromagnetico lontano (far-field) e al rilevamento senza contatto di prossimità, sfruttando le interazioni elettromagnetiche in campo vicino (near field). Nell’ambito del rilevamento senza contatto a distanza, la tesi indaga l'uso delle onde elettromagnetiche per il monitoraggio non invasivo del livello di solidi granulari all’interno di silos. Questo sistema, sviluppato impiegando un sensore radar commerciale a onda continua modulata in frequenza, dimostra il potenziale di questa tecnologia nel monitoraggio non invasivo e senza contatto in contesti agricoli e industriali. Considerando invece lo scenario del rilevamento senza contatto di prossimità, la tesi fornisce un'analisi dell'interrogazione senza contatto di sensori passivi e ne presenta diversi approcci e applicazioni. Vengono affrontate le problematiche delle misurazioni senza contatto, proponendo alcune soluzioni per migliorarne l'affidabilità e l'accuratezza, permettendo in particolare di renderle indipendenti dalla distanza di interrogazione. In particolare, la tesi presenta un sistema per la misurazione senza contatto della frequenza di risonanza di risonatori MEMS piezoelettrici. La tecnica proposta sfrutta l'accoppiamento magnetico tra un’unità di interrogazione ed un’unità sensore ed è applicata in modo innovativo per la rilevazione della temperatura, sfruttando le proprietà dei risonatori a disco in nitruro di alluminio (AlN) su silicio sottile piezoelettrico (TPoS) ed una tecnica di interrogazione senza contatto a tempo commutato. Inoltre, la tesi presenta un’etichetta flessibile per la misurazione della temperatura corporea, che combina il rilevamento a contatto della temperatura con una lettura senza contatto dell’unità sensore sfruttandone l'accoppiamento magnetico con un unità di interrogazione. L’etichetta flessibile, che costituisce l'unità sensore, è composta da una bobina induttiva che consente l'accoppiamento magnetico, un condensatore ceramico utilizzato come elemento sensibile alla temperatura, sfruttandone il coefficiente di temperatura della capacità, ed un induttore aggiuntivo utilizzato per rendere la frequenza di risonanza del circuito risonante RLC indipendente dalla flessione dell’etichetta. In modo analogo, le tecniche di interrogazione proposte sono state applicate ad un nuovo metodo per l'interrogazione senza contatto di un sensore induttivo, utilizzato per rilevare target conduttivi. Il sistema proposto presenta una bobina avvolta collegata con un condensatore per formare un circuito LC risonante, la cui frequenza di risonanza cambia quando un target conduttivo viene introdotto nel campo magnetico generato dalla bobina stessa. Attraverso una bobina di interrogazione esterna, accoppiata elettromagneticamente al sensore induttivo, è possibile interrogare senza contatto il sensore induttivo, permettendo quindi la rilevazione a distanza di target conduttivi. Infine, lo studio esposto in questa tesi introduce una tecnica avanzata per l'interrogazione senza contatto di sensori resistivi passivi, sfruttando risonatori a cristallo di quarzo come dispositivo risonante e basandosi sulla stima del fattore di qualità del circuito che costituisce l’unità sensore. Il metodo proposto supera i limiti delle tecniche basate su misure di ampiezza, legati in particolare all'influenza della distanza di interrogazioneNoncontact sensing technologies have become increasingly central in a variety of fields, ranging from industrial monitoring to healthcare applications. In this context, the thesis focuses on the development and implementation of innovative techniques, electronic circuits, and devices for contactless sensing via wireless coupling, responding to the growing interest in noncontact measurement methods. The themes treated in this thesis regard both the scenario of distant noncontact sensing in the electromagnetic far field, and proximate wireless sensing, leveraging on near-field electromagnetic interactions. Each domain is distinctly characterized by its specific technologies, applications, and methodologies, reflecting their operational ranges and fundamental principles. In the domain of distant wireless sensing, the thesis investigates the use of electromagnetic waves for unobtrusive level monitoring of granular solids in silos. This system, developed employing a commercial frequency-modulated continuous-wave radar sensor, demonstrates the potential of this technology in unobtrusive monitoring in agricultural and industrial environments. Considering the proximate wireless sensing domain, the thesis provides an analysis of noncontact interrogation of passive sensors and it presents different approaches and applications. It addresses the challenges and offers solutions for enhancing the reliability and accuracy of contactless measurements, which can be advantageously independent of the interrogation distance. This can path the way to the development of low-cost, disposable and sustainable devices for healthcare and industrial applications. In particular, the thesis presents a system for the noncontact measurement of the resonant frequency of piezoelectric MEMS resonators. The technique exploits magnetic coupling between interrogation and sensor units, and it is innovatively applied for temperature sensing exploiting a thin-film piezoelectric on silicon (TPoS) aluminium nitride (AlN) disk resonators and a contactless interrogation time-gated technique. Furthermore, the thesis presents a flexible patch for body temperature measurement, combining contact sensing with contactless readout, and exploiting magnetic coupling between interrogation and sensor units. The flexible patch, forming the sensor unit, is composed of an inductive coil for magnetic coupling, a ceramic capacitor used as the temperature sensing element exploiting its temperature coefficient of capacitance and an additional inductor to make the resonant frequency of the resulting resonant RLC circuit independent from the bending of the patch. Similarly, interrogation techniques have been applied to a novel method for contactless interrogation of an inductive sensor used for detecting conductive targets. The system features a solenoidal coil connected with a capacitor to form a resonating LC circuit, whose resonant frequency changes when a conductive target is introduced in the generated magnetic field. An external interrogation coil electromagnetically coupled to the inductive sensor enables the wireless measurement for conductive target detection. Lastly, the study introduces an advanced technique for the contactless interrogation of passive resistive sensors. The novel approach exploits the resonant frequency stability and the high quality factor of a quartz crystal resonator, used as a resonant element, with a series-connected resistor acting as the sensing element. This method overcomes the limitations of amplitude measurements techniques typically affected by the interrogation distance

NASA Tech Briefs, July 2010

Topics covered include: Wirelessly Interrogated Wear or Temperature Sensors; Processing Nanostructured Sensors Using Microfabrication Techniques; Optical Pointing Sensor; Radio-Frequency Tank Eigenmode Sensor for Propellant Quantity Gauging; High-Temperature Optical Sensor; Integral Battery Power Limiting Circuit for Intrinsically Safe Applications; Configurable Multi-Purpose Processor; Squeezing Alters Frequency Tuning of WGM Optical Resonator; Automated Computer Access Request System; Range Safety for an Autonomous Flight Safety System; Fast and Easy Searching of Files in Unisys 2200 Computers; Parachute Drag Model; Evolutionary Scheduler for the Deep Space Network; Modular Habitats Comprising Rigid and Inflatable Modules; More About N2O-Based Propulsion and Breathable-Gas Systems; Ultrasonic/Sonic Rotary-Hammer Drills; Miniature Piezoelectric Shaker for Distribution of Unconsolidated Samples to Instrument Cells; Lunar Soil Particle Separator; Advanced Aerobots for Scientific Exploration; Miniature Bioreactor System for Long-Term Cell Culture; Electrochemical Detection of Multiple Bioprocess Analytes; Fabrication and Modification of Nanoporous Silicon Particles; High-Altitude Hydration System; Photon Counting Using Edge-Detection Algorithm; Holographic Vortex Coronagraph; Optical Structural Health Monitoring Device; Fuel-Cell Power Source Based on Onboard Rocket Propellants; Polar Lunar Regions: Exploiting Natural and Augmented Thermal Environments; Simultaneous Spectral Temporal Adaptive Raman Spectrometer - SSTARS; Improved Speed and Functionality of a 580-GHz Imaging Radar; Bolometric Device Based on Fluxoid Quantization; Algorithms for Learning Preferences for Sets of Objects; Model for Simulating a Spiral Software-Development Process; Algorithm That Synthesizes Other Algorithms for Hashing; Algorithms for High-Speed Noninvasive Eye-Tracking System; and Adapting ASPEN for Orbital Express

Improved micro-contact resistance model that considers material deformation, electron transport and thin film characteristics

This paper reports on an improved analytic model forpredicting micro-contact resistance needed for designing microelectro-mechanical systems (MEMS) switches. The originalmodel had two primary considerations: 1) contact materialdeformation (i.e. elastic, plastic, or elastic-plastic) and 2) effectivecontact area radius. The model also assumed that individual aspotswere close together and that their interactions weredependent on each other which led to using the single effective aspotcontact area model. This single effective area model wasused to determine specific electron transport regions (i.e. ballistic,quasi-ballistic, or diffusive) by comparing the effective radius andthe mean free path of an electron. Using this model required thatmicro-switch contact materials be deposited, during devicefabrication, with processes ensuring low surface roughness values(i.e. sputtered films). Sputtered thin film electric contacts,however, do not behave like bulk materials and the effects of thinfilm contacts and spreading resistance must be considered. Theimproved micro-contact resistance model accounts for the twoprimary considerations above, as well as, using thin film,sputtered, electric contact

NASA Tech Briefs Index, 1977, volume 2, numbers 1-4

Announcements of new technology derived from the research and development activities of NASA are presented. Abstracts, and indexes for subject, personal author, originating center, and Tech Brief number are presented for 1977

NASA patent abstracts bibliography: A continuing bibliography. Section 1: Abstracts (supplement 19)

Abstracts are cited for 130 patents and patent applications introduced into the NASA scientific and technical information system during the period of January 1981 through July 1981. Each entry consists of a citation, an abstract, and in most cases, a key illustration selected from the patent or application for patent

Aeronautical engineering: A continuing bibliography with indexes, supplement 100

This bibliography lists 295 reports, articles, and other documents introduced into the NASA Scientific and Technical Information System in August 1978

Macro-meso-microsystems integration in LTCC : LDRD report.

Low Temperature Cofired Ceramic (LTCC) has proven to be an enabling medium for microsystem technologies, because of its desirable electrical, physical, and chemical properties coupled with its capability for rapid prototyping and scalable manufacturing of components. LTCC is viewed as an extension of hybrid microcircuits, and in that function it enables development, testing, and deployment of silicon microsystems. However, its versatility has allowed it to succeed as a microsystem medium in its own right, with applications in non-microelectronic meso-scale devices and in a range of sensor devices. Applications include silicon microfluidic ''chip-and-wire'' systems and fluid grid array (FGA)/microfluidic multichip modules using embedded channels in LTCC, and cofired electro-mechanical systems with moving parts. Both the microfluidic and mechanical system applications are enabled by sacrificial volume materials (SVM), which serve to create and maintain cavities and separation gaps during the lamination and cofiring process. SVMs consisting of thermally fugitive or partially inert materials are easily incorporated. Recognizing the premium on devices that are cofired rather than assembled, we report on functional-as-released and functional-as-fired moving parts. Additional applications for cofired transparent windows, some as small as an optical fiber, are also described. The applications described help pave the way for widespread application of LTCC to biomedical, control, analysis, characterization, and radio frequency (RF) functions for macro-meso-microsystems

Micro-manufactured Rogowski coils for fault detection of aircraft electrical wiring and interconnection systems (EWIS)

Aircraft wiring failures have increased over the last few years resulting in arc faults and high-energy flashover on the wiring bundle, which can propagate down through aircraft Electrical Wiring and Interconnect Systems (EWIS). It is considered cost prohibitive to completely rewire a plane in terms of man hours and operational time lost to do this, and most faults are only detectable whilst the aircraft is in flight. Temperature, humidity and vibration all accelerate ageing and failure effects on EWIS. This research investigates methods of in-situ non-invasive testing of aircraft wiring during fight. Failure Mode Effects and Analysis (FMEA) was performed on legacy aircraft EWIS using data obtained from RAF Brize Norton. Micro-Electro-mechanical- Systems (MEMS) were evaluated for use in a wire monitoring system that measures the environmental parameters responsible for ageing and failure of EWIS. Such MEMS can be developed into a Health and Usage Monitoring MicroSystem (HUMMS) by incorporating advanced signal processing and prognostic software. Current and humidity sensors were chosen for further investigation in this thesis. These sensors can be positioned inside and outside cable connectors of EWIS so that arc faults can be reliably detected and located. This thesis presents the design, manufacture and test of micro-manufactured Rogowski sensors. The manufactured sensors were benchmarked against commercial high frequency current transformers (HFCT), as these devices can also detect high frequency current signature due to wire insulation failure. Results indicate that these sensors possess superior voltage output compared to the HFCT. The design, manufacture and test of a polymer capacitive humidity sensor is also presented. Two different types of polymer were reviewed as part of the evaluation. A feature of the sensor design is recovery from exposure to chemicals found on wiring bundles. Current and humidity sensors were demonstrated to be suitable for integrating onto a common substrate with accelerometers, temperature sensors and pressure sensors for health monitoring and prognostics of aircraft EWIS.Engineering and Physical Sciences Research Council (EPSRC

Micro-manufactured Rogowski coils for fault detection of aircraft electrical wiring and interconnect systems (EWIS)

Aircraft wiring failures have increased over the last few years resulting in arc faults and high-energy flashover on the wiring bundle, which can propagate down through aircraft Electrical Wiring and Interconnect Systems (EWIS). It is considered cost prohibitive to completely rewire a plane in terms of man hours and operational time lost to do this, and most faults are only detectable whilst the aircraft is in flight. Temperature, humidity and vibration all accelerate ageing and failure effects on EWIS. This research investigates methods of in-situ non-invasive testing of aircraft wiring during fight. Failure Mode Effects and Analysis (FMEA) was performed on legacy aircraft EWIS using data obtained from RAF Brize Norton. Micro-Electro-mechanical- Systems (MEMS) were evaluated for use in a wire monitoring system that measures the environmental parameters responsible for ageing and failure of EWIS. Such MEMS can be developed into a Health and Usage Monitoring MicroSystem (HUMMS) by incorporating advanced signal processing and prognostic software. Current and humidity sensors were chosen for further investigation in this thesis. These sensors can be positioned inside and outside cable connectors of EWIS so that arc faults can be reliably detected and located. This thesis presents the design, manufacture and test of micro-manufactured Rogowski sensors. The manufactured sensors were benchmarked against commercial high frequency current transformers (HFCT), as these devices can also detect high frequency current signature due to wire insulation failure. Results indicate that these sensors possess superior voltage output compared to the HFCT. The design, manufacture and test of a polymer capacitive humidity sensor is also presented. Two different types of polymer were reviewed as part of the evaluation. A feature of the sensor design is recovery from exposure to chemicals found on wiring bundles. Current and humidity sensors were demonstrated to be suitable for integrating onto a common substrate with accelerometers, temperature sensors and pressure sensors for health monitoring and prognostics of aircraft EWIS