Impact of Bias Temperature Instability on Soft Error Susceptibility

In this paper, we address the issue of analyzing the effects of aging mechanisms on ICs' soft error (SE) susceptibility. In particular, we consider bias temperature instability (BTI), namely negative BTI in pMOS transistors and positive BTI in nMOS transistors that are recognized as the most critical aging mechanisms reducing the reliability of ICs. We show that BTI reduces significantly the critical charge of nodes of combinational circuits during their in-field operation, thus increasing the SE susceptibility of the whole IC. We then propose a time dependent model for SE susceptibility evaluation, enabling the use of adaptive SE hardening approaches, based on the ICs lifetime

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Exploiting Aging Benefits for the Design of Reliable Drowsy Cache Memories

In this paper, we show how beneficial effects of aging on static power consumption can be exploited to design reliable drowsy cache memories adopting dynamic voltage scaling(DVS) to reduce static power. First, we develop an analytical model allowing designers to evaluate the long-term threshold voltage degradation induced by bias temperature instability (BTI)in a drowsy cache memory. Through HSPICE simulations, we demonstrate that, as drowsy memories age, static power reduction techniques based on DVS become more effective because of reduction in sub-threshold current due to BTI aging. We develop a simulation framework to evaluate trade-offs between static power and reliability, and a methodology to properly select the “drowsy” data retention voltage. We then propose different architectures of a drowsy cache memory allowing designers to meet different power and reliability constraints. The performed HSPICE simulations show a soft error rate and static noise margin improvement up to 20.8% and 22.7%, respectively, compared to standard aging unaware drowsy technique. This is achieved with a limited static power increase during the very early lifetime, and with static energy saving of up to 37% in 10 years of operation, at no or very limited hardware overhead

Techniques for Aging, Soft Errors and Temperature to Increase the Reliability of Embedded On-Chip Systems

This thesis investigates the challenge of providing an abstracted, yet sufficiently accurate reliability estimation for embedded on-chip systems. In addition, it also proposes new techniques to increase the reliability of register files within processors against aging effects and soft errors. It also introduces a novel thermal measurement setup that perspicuously captures the infrared images of modern multi-core processors

Cross-Layer Approaches for an Aging-Aware Design of Nanoscale Microprocessors

Thanks to aggressive scaling of transistor dimensions, computers have revolutionized our life. However, the increasing unreliability of devices fabricated in nanoscale technologies emerged as a major threat for the future success of computers. In particular, accelerated transistor aging is of great importance, as it reduces the lifetime of digital systems. This thesis addresses this challenge by proposing new methods to model, analyze and mitigate aging at microarchitecture-level and above

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Degradation in FPGAs: Monitoring, Modeling and Mitigation

This dissertation targets the transistor aging degradation as well as the associated thermal challenges in FPGAs (since there is an exponential relation between aging and chip temperature). The main objectives are to perform experimentation, analysis and device-level model abstraction for modeling the degradation in FPGAs, then to monitor the FPGA to keep track of aging rates and ultimately to propose an aging-aware FPGA design flow to mitigate the aging

Efficient Estimation of Reliability Metrics for Circuits in Deca-Nanometer Nodes

51 σ.Καθώς η τεχνολογία οδηγεί στη κατασκευή τρανζίστορ ολοένα και μικρότερων διαστάσεων, έχουν εμφανιστεί αρκετά φαινόμενα που επηρεάζουν την αξιοπιστία των ολοκληρωμένων κυκλωμάτων. Ένα από αυτά τα φαινόμενα ονομάζεται "Bias Temperature Instability", αποτελεί σημαντικό κίνδυνο για την αξιοπιστία των ολοκληρωμένων κυκλωμάτων και έχει παρατηρηθεί εδώ και πάνω από 30 χρόνια. Το πρώτο μοντέλο που προσπάθησε να εξηγήσει αυτό το φαινόμενο εμφανίστηκε πριν από 30 περίπου χρόνια, βασίστηκε στη διάχυση υδρογόνου και ως εκ τούτου ονομάστηκε "Reaction-Diffusion model". Πριν από μερικά χρόνια δημιουργήθηκε ένα νέο ατομιστικό μοντέλο το οποίο βασίζεται κυρίως στην εμφάνιση ελαττωμάτων στο διηλεκτρικό μεταξύ της πύλης και του καναλιού των FET τρανζίστορ. Μελετώντας κανείς τη βιβλιογραφία που αφορά στο ατομιστικό αυτό μοντέλο, μπορεί να συναντήσει εργαλεία που προσομοιώνουν με ακρίβεια το μοντέλο αλλά δυστυχώς απαιτούν αρκετό χρόνο για να εκτελεστούν, κάτι το οποίο τα καθιστά απαγορευτικά για εκτενή χρήση. Παράλληλα, υπάρχουν εργαλεία βασισμένα στο μοντέλο της διάχυσης τα οποία βέβαια αδυνατούν να παράξουν σωστά και λεπτομερή αποτελέσματα, κυρίως σε τεχνολογίες μικρών διαστάσεων. Η παρούσα λοιπόν διπλωματική εργασία παρουσιάζει τα αποτελέσματα ενός νέου και καινοτόμου εργαλείου το οποίο βασίζεται στο ατομιστικό μοντέλο, ωστόσο προσομοιώνει αποδοτικά αλλά και με ακρίβεια το φαινόμενο της γήρανσης. Ένα αντιπροσωπευτικό μονοπάτι στατικής μνήμης (SRAM) θα χρησιμοποιηθεί ως παράδειγμα της λειτουργίας του μοντέλου ενώ παράλληλα θα υπολογισθούν, με βάση τα αποτελέσματα των προσομοιώσεων αυτών, μετρικές, σημαντικές για το χαρακτηρισμό της απόδοσης και αξιοπιστίας του κυκλώματος, ενώ παράλληλα θα μελετηθούν λεπτομερώς και οι σχέσεις που τις συνδέουν.In modern technologies of integrated circuits (IC) and with the downscaling of device dimensions, various degradation modes constitute major reliability concerns. Bias Temperature Instability (BTI) is a representative example, posing as a significant reliability threat in Field-Effect Transistor (FET) technologies and has been known for more than 30 years. At first, the model that tried to explain this phenomenon was based on the Reaction-Diffusion (RD) theory and was developed nearly 30 years ago. Recently, an atomistic model has been proposed, that enables the modeling of BTI in modern technologies. By observing the amount of software designed to simulate the BTI degradation, tools can be found that are based on the atomistic theory but are computationally prohibitive when it comes to simulating complex circuits consisting of a large number of devices. Tools based on the RD model are unable to accurately capture the BTI-induced degradation, especially in devices with small dimensions. The current thesis is appropriately positioned since it discusses a novel simulation framework that is efficient yet highly accurate. A subset of an embedded Static Random Access Memory (SRAM) is used for verification purposes. The estimation of the functional yield of the circuit over three years of operation will be examined as well as other reliability metrics, such as defects per million (DPM), mean time to failure (MTTF) and failures in time (FIT rate). Finally, the interplay between these metrics is discussed and efficient computation methods are proposed for each one.Μιχαήλ Α. Νόλτση