4,371 research outputs found

    Internet of things

    Get PDF
    Manual of Digital Earth / Editors: Huadong Guo, Michael F. Goodchild, Alessandro Annoni .- Springer, 2020 .- ISBN: 978-981-32-9915-3Digital Earth was born with the aim of replicating the real world within the digital world. Many efforts have been made to observe and sense the Earth, both from space (remote sensing) and by using in situ sensors. Focusing on the latter, advances in Digital Earth have established vital bridges to exploit these sensors and their networks by taking location as a key element. The current era of connectivity envisions that everything is connected to everything. The concept of the Internet of Things(IoT)emergedasaholisticproposaltoenableanecosystemofvaried,heterogeneous networked objects and devices to speak to and interact with each other. To make the IoT ecosystem a reality, it is necessary to understand the electronic components, communication protocols, real-time analysis techniques, and the location of the objects and devices. The IoT ecosystem and the Digital Earth (DE) jointly form interrelated infrastructures for addressing today’s pressing issues and complex challenges. In this chapter, we explore the synergies and frictions in establishing an efficient and permanent collaboration between the two infrastructures, in order to adequately address multidisciplinary and increasingly complex real-world problems. Although there are still some pending issues, the identified synergies generate optimism for a true collaboration between the Internet of Things and the Digital Earth

    Distributed expert systems for ground and space applications

    Get PDF
    Presented here is the Spacecraft Command Language (SCL) concept of the unification of ground and space operations using a distributed approach. SCL is a hybrid software environment borrowing from expert system technology, fifth generation language development, and multitasking operating system environments. Examples of potential uses for the system and current distributed applications of SCL are given

    Internet of Things in Geospatial Analytics

    Get PDF
    Digital Earth was born with the aim of replicating the real world within the digital world. Many efforts have been made to observe and sense the Earth, both from space and by using in situ sensors. Focusing on the latter, advances in Digital Earth have established vital bridges to exploit these sensors and their networks by taking location as a key element. The current era of connectivity envisions that everything is connected to everything. The concept of the Internet of Things emerged as a holistic proposal to enable an ecosystem of varied, heterogeneous networked objects and devices to speak and interact with each other. To make the IoT ecosystem a reality, it is necessary to understand the electronic components, communication protocols, real-time analysis techniques, and the location of the objects and devices. The IoT ecosystem and the Digital Earth jointly form interrelated infrastructures for addressing modern pressing issues and complex challenges. In this chapter, we explore the synergies and frictions in establishing an efficient and permanent collaboration between the two infrastructures, in order to adequately address multidisciplinary and increasingly complex real-world problems. Although there are still some pending issues, the identified synergies generate optimism for a true collaboration between the Internet of Things and the Digital Earth.Comment: Book chapter at the Manual of Digital Earth Book, ISDE, September 2019, Editors: Huadong Guo, Michael F. Goodchild and Alessandro Annoni, (Publisher: Springer, Singapore

    A Validation Assessment of THUNDER 6.5\u27s Intelligence, Surveillance, and Reconnaissance Module

    Get PDF
    A validation assessment of THUNDER 6.5\u27s Intelligence, Surveillance, and Reconnaissance (ISR) module is accomplished using formulational and experimental validation techniques. A comparison of ISR purposes and processes according to military doctrine is made with the purposes and processes of ISR implemented within THUNDER 6.5. This comparison provides an overview of the process, an understanding of the level of aggregation within THUNDER, insight into possible problem areas in THUNDER, and a basis for improving THUNDER ISR processes. Sensitivity analysis of the ISR parameters as they relate to the Quality, Quantity, and Timeliness of ISR is also presented to provide insight into the responsiveness of THUNDER to changes in ISR capability for selected battle outcomes. Linear Regression and a Face-Centered Central Composite Design were used to generate a response surface. Ninety-percent confidence intervals were used to determine differences in mean response among the full factorial design points

    Unmanned systems interoperability standards

    Get PDF
    Over the past several years, there has been rapid growth in the development and employment of unmanned systems in military and civilian endeavors. Some military organizations have expressed concern that these systems are being fielded without sufficient capabilities to interoperate with existing systems. Despite recognition of this requirement, interoperability efforts remain diverse and disjointed across the United States and internationally. The Naval Postgraduate School (NPS), Monterey, California, was sponsored by the U.S. Office of the Secretary of Defense (OSD) Joint Ground Robotics Enterprise (JGRE) in Fiscal Year 2016 (FY16) to explore (1) enhancement of robotics education; (2) improved representation of robotic systems in combat simulations; and (3) interoperability standards for military robotics systems. This report discusses work performed in FY16 to identify current and emerging interoperability standards for unmanned systems, including interactions of robotic systems with command and control (C2) and simulation systems. The investigation included assessment of the applicability of standardization activities in the Simulation Interoperability Standards Organization (SISO) in its development of the Phase 1 Coalition Battle Management Language (C-BML) and currently in-progress Command and Control Systems - Simulation Systems Interoperation (C2SIM) standardization efforts. The report provides a recommended approach, standards, activities, and timetable for a cross-system communications roadmap.Secretary of Defense Joint Ground Robotics Enterprise, 3090 Defense Pentagon, Room 5C756, Washington, DC 20301Office of the Secretary of Defense Joint Ground Robotics Enterprise.Approved for public release; distribution is unlimited

    Executable Architectures and their Application to a Geographically Distributed Air Operations Center

    Get PDF
    Integrated Architectures and Network Centric Warfare represent two central concepts in the Department of Defense\u27s (DoD) on-going transformation. The true power of integrated architectures is brought to bear when they are combined with simulation to move beyond a static representation and create an executable architecture. This architecture can then be used to experiment with system configurations and parameter values to guide employment decisions. The process of developing and utilizing an executable architecture will be employed to assess an Air Operations Center (AOC). This thesis applies and expands upon the methodology of Dr. Alexander Levis, former Chief Scientist of the Air Force, to the static architecture representing the Aerospace Operations Center (AOC). Using Colored Petri Nets and other simulation tools, an executable architecture for the AOC\u27s Air Tasking Order (ATO) production thread was developed. These models were then used to compare the performance of a current, forward-deployed AOC configuration to three other potential configurations that utilize a network centric environment to deploy a portion of the AOC and provide reach-back capabilities to the non-deployed units. Performance was measured by the amount of time required to execute the ATO cycle under each configuration. Communication requirements were analyzed for each configuration and stochastic delays were modeled for all transactions in which requirements could not be met due to the physical configuration of the AOC elements. All four configurations were found to exhibit statistically different behavior with regard to ATO cycle time

    Thoughts about a General Theory of Influence in a DIME/PMESII/ASCOP/IRC2 Model

    Get PDF
    The leading question of this paper is: “How would influence warfare (“iWar”) work and how can we simulate it?” The paper discusses foundational aspects of a theory and model of influence warfare by discussing a framework built along the DIME/PMESII/ASCOP dimension forming a prism with three axes. The DIME concept groups the many instruments of power a nation state can muster into four categories: Diplomacy, Information, Military and Economy. PMESII describes the operational environment in six domains: Political, Military, Economic, Social, Information and Infrastructure. ASCOPE is used in counter insurgency (COIN) environments to analyze the cultural and human environment (aka the “human terrain”) and encompasses Areas, Structures, Capabilities, Organization, People and Events. In addition, the model reflects about aspects of information collection requirements (ICR) and information capabilities requirements (ICR) - hence DIME/PMESII/ASCOP/ICR2. This model was developed from an influence wargame that was conducted in October 2018. This paper introduces basic methodical questions around model building in general and puts a special focus on building a framework for the problem space of influence/information/hybrid warfare takes its shape in. The article tries to describe mechanisms and principles in the information/influence space using cross discipline terminology (e.g. physics, chemistry and literature). On a more advanced level this article contributes to the Human, Social, Culture, Behavior (HSCB) models and community. One goal is to establish an academic, multinational and whole of government influence wargamer community. This paper introduces the idea of the perception field understood as a molecule of a story or narrative that influences an observer. This molecule can be drawn as a selection of vectors that can be built inside the DIME/PMESII/ASCOP prism. Each vector can be influenced by a shielding or shaping action. These ideas were explored in this influence wargame

    Tactical Satellite (TacSat) feasibility study a scenario driven approach

    Get PDF
    The objective of this project was to examine the feasibility of developing a tactically controlled, operationally responsive satellite system. A specific mission scenario, the Philippine Sea Scenario, was chosen to guide and bound the analysis. Within the bounds of this scenario, this high level space systems engineering exercise provided insights into operations and military utility as well as enough granularity to estimate costs for such a system. The operational approach and high level design concept is based on the Space Mission Analysis and Design (SMAD) process authored by Wiley J. Larson and Kames R. Wertz. The study shows that there are tactical scenarios in which space capabilities provide military utility and cost effectiveness above what is provided by traditional tactical assets such as UAVs. This is particularly true when large operational areas are involved and long periods of service are required.http://archive.org/details/tacticalsatellit109456927N

    Mixed Initiative Systems for Human-Swarm Interaction: Opportunities and Challenges

    Full text link
    Human-swarm interaction (HSI) involves a number of human factors impacting human behaviour throughout the interaction. As the technologies used within HSI advance, it is more tempting to increase the level of swarm autonomy within the interaction to reduce the workload on humans. Yet, the prospective negative effects of high levels of autonomy on human situational awareness can hinder this process. Flexible autonomy aims at trading-off these effects by changing the level of autonomy within the interaction when required; with mixed-initiatives combining human preferences and automation's recommendations to select an appropriate level of autonomy at a certain point of time. However, the effective implementation of mixed-initiative systems raises fundamental questions on how to combine human preferences and automation recommendations, how to realise the selected level of autonomy, and what the future impacts on the cognitive states of a human are. We explore open challenges that hamper the process of developing effective flexible autonomy. We then highlight the potential benefits of using system modelling techniques in HSI by illustrating how they provide HSI designers with an opportunity to evaluate different strategies for assessing the state of the mission and for adapting the level of autonomy within the interaction to maximise mission success metrics.Comment: Author version, accepted at the 2018 IEEE Annual Systems Modelling Conference, Canberra, Australi

    Building Information Modeling: Beyond Design, Commissioning and Construction

    Get PDF
    Building Information Modeling (BIM) is continuing to grow in popularity among contractors and more recently among owners as the complexity and usefulness of models are improved. Many construction firms have used BIM or adopted it in their practices to some degree. However, while it is growing in popularity, its use in facility management by the owner is still lagging. This research examines how construction processes can be better organized to supply the owner a BIM that would be useful for facility management activities. The research was conducted to identify successful post-construction BIM implementation practices and the ways in which contractors supported these processes. The research found trends among BIM execution practices of advanced contractors and owners. A common obstacle to contractors\u27 ability to provide owners with useful models was uncovered, leading to the creation of a proposed process for creating a model that meets the needs of facility management activities. The research utilized case studies to identify the BIM creation processes used by advanced BIM users. In-depth interviews focused on the processes used by the BIM professional to create owner-inspired models suitable for facility management purposes. The interviews verify that construction firms are faced with challenges when attempting to meet the needs of facility owners. This thesis presents the obstacles that industry professionals are facing in meeting client needs in respect to BIM for use during facility management. This thesis also discusses processes that firms are using to turn over models to owners and outlines a purposed process for the creation of owner-inspired models by contractors
    corecore