Analysis of high capacity short reach optical links

Over the last few years, the global Internet traffic has grown exponentially due to the advent of the social networks, high definition streaming, online gaming, high performance computing and cloud services. The network is saturating, facing a challenge to provide enough capacity to such ever-demanding bandwidth expensive applications. Fiber optic communications is the only technology capable of dealing such high demands due to its advantages over the traditional electrical transmission technology. The short haul transmissions currently rely on direct detection due to low cost, low power and low complexity as compared to the coherent detection schemes. In order to increase the bit rate, several advance modulation formats are under investigation for short reach transmissions. Such links mostly use intensity modulation direct detection (IMDD) schemes providing a simple system when compared with the coherent receivers. In this thesis the performance of Multilevel Pulse Amplitude Modulation (MPAM) is studied using IMDD, providing good spectral efficiency as well as able to deal with the limited electronic devices bandwidth. MPAM can address the typical optical channel without the need to go with more complex and higher power modulation schemes. It provides a trade off between sensitivity and the complexity. So a simple communication system using MPAM is implemented using an external modulated laser transmitted over a distance of 2 km. In order to reduce the cost, single laser and single receiver technique is being adopted. The performance of the MPAM system in a bandwidth limited scenarios is studied with a possibility to use equalization techniques to improve the sensitivity. The utility of Forward Error Correction codes is also studied to improve the performance without increasing the latency. By increasing the number of bits per symbol, the system becomes more sensitive to the impairments. Moreover, the components and the connectors in the transmission system also introduces multipath interference (MPI) that is a key limitation to the use of advance modulation formats. Hence a detailed study is carried out to investigate the MPI effects. At the end, a novel idea based on reflective Mach-Zehnder modulator (MZM) is presented that reuses the modulated wavelength eliminating the need for a laser. As a consequent, the cost and power consumption specifically targeted for the optical interconnect environment is reduced. In a nutshell, the thesis provides an overview of the direct detection system targeted to the short optical links. It includes the studies related to the optical transmission systems and provides an insight of the available advance modulation formats and the detection schemes. Finally, the simulations and laboratory results are provided showing that adoption of MPAM is a viable solution that should be employed in high capacity short reach optical links

Advanced DSP Techniques for High-Capacity and Energy-Efficient Optical Fiber Communications

The rapid proliferation of the Internet has been driving communication networks closer and closer to their limits, while available bandwidth is disappearing due to an ever-increasing network load. Over the past decade, optical fiber communication technology has increased per fiber data rate from 10 Tb/s to exceeding 10 Pb/s. The major explosion came after the maturity of coherent detection and advanced digital signal processing (DSP). DSP has played a critical role in accommodating channel impairments mitigation, enabling advanced modulation formats for spectral efficiency transmission and realizing flexible bandwidth. This book aims to explore novel, advanced DSP techniques to enable multi-Tb/s/channel optical transmission to address pressing bandwidth and power-efficiency demands. It provides state-of-the-art advances and future perspectives of DSP as well

Advanced Signal Processing for Pulse-Amplitude Modulation Optical Transmission Systems

[ES] Los sistemas de transmisión óptica no-coherente se emplean actualmente en las redes ópticas de corto alcance (< 80 km), como son las redes de ámbito metropolitano. La implementación más común en el estado del arte se basa en sistemas que emplean multiplexación por división en longitud de onda (WDM, wavelength division multiplexing) de cuatro longitudes de onda (¿) proporcionando un régimen binario de 100 Gbps (4¿×25 Gbps). En los últimos años, los sistemas de transmisión ópticos no-coherentes están evolucionando desde 100 Gbps a 400 Gbps (4¿×100 Gbps). Dado que este mercado comprende un gran número de sistemas, el coste es un parámetro importante que debe ser lo más bajo posible. El objetivo de esta tesis es investigar distintos aspectos del procesado de señal en general y, específicamente, investigar nuevas técnicas de procesado digital de señal (DSP, digital signal processing) que puedan ser utilizadas en sistemas de transmisión óptica no-coherentes empleando la modulación por amplitud de pulsos (PAM, pulse-amplitude modulation). Para que una técnica DSP sea interesante en el contexto de una red óptica WDM no-coherente, esta debe mitigar de manera efectiva al menos una de las tres limitaciones principales que afectan a estos sistemas: limitaciones de ancho de banda, limitaciones por dispersión cromática (CD), y el ruido. En esta tesis se proponen y examinan una serie de algoritmos cuyo su rendimiento es analizado mediante simulación y experimentalmente en laboratorio: - Feed-forward equalizer (FFE): este es el esquema de ecualización más común que se emplea principalmente en las transmisiones ópticas no-coherentes de alto régimen binario. Puede compensar grandes limitaciones en el ancho de banda. - Estimación de la secuencia de máxima verosimilitud (MLSE): el MLSE es un detector óptimo y, por lo tanto, proporciona las mejores prestaciones en detección cuando se abordan las limitaciones por CD y de ancho de banda. - Conformación geométrica de la constelación: en los esquemas de modulación de intensidad óptica multinivel, la distancia entre los niveles de amplitud puede ajustarse adecuadamente (de manera que no son equidistantes) a fin de aumentar la tolerancia de la señal frente al ruido. - Conformación probabilística: técnica diseñada específicamente para esquemas de modulación multinivel. Esta técnica ajusta la probabilidad de cada nivel de amplitud de modo que se incrementa la tolerancia al ruido óptico. - Señalización de respuesta parcial (PRS, partial signaling response): este es un enfoque basado en DSP donde una interferencia entre símbolos (ISI, inter-symbol interference) controlada es introducida intencionalmente de tal manera que la señal resultante requiere menos ancho de banda. La técnica PRS puede adaptarse para combatir también el efecto de CD. - Pre-énfasis digital (DPE, digital pre-emphasis): esta técnica consiste en aplicar el inverso de la función de transferencia del sistema a la señal en el transmisor, lo que reduce el impacto de las limitaciones de ancho de banda en el receptor. - Modulación con codificación Trellis (TCM, Trellis-coded modulation): esquema de modulación que combina elementos de corrección de errores (FEC, forward error correction) con técnicas de partición en conjuntos y modulación multidimensional para generar una señal más resistente al ruido. - Modulación multidimensional por partición en conjuntos: muy similar a TCM, pero sin ningún elemento FEC. Tiene menos ganancias que TCM en términos de tolerancia al ruido, pero no es tan sensible al ISI. Utilizando estas técnicas, esta tesis demuestra que es posible lograr una transmisión óptica con régimen binario de 100 Gbps/¿ empleando componentes de bajo coste. En esta tesis también demuestra regímenes binarios de más de 200 Gbps, lo que indica que la transmisión óptica no-coherente con modulación PAM puede ser una solución viable y eficiente en coste[CA] Actualment, s'utilitzen sistemes òptics no coherents en xarxes òptiques de curt abast ( < 80 km), com són les xarxes d'àmbit metropolità. La implementació més comuna que podem trobar en l'estat de l'art es correspon amb sistemes emplenant multiplexació per divisió en longitud d'ona (WDM, wavelength division multiplexing) de quatre longituds d'ona (¿) proporcionant un règim binari de 100 Gbps (4¿×25 Gbps). En els últims anys, els sistemes de transmissió òptica no-coherents han evolucionat des de 100 Gbps cap a 400 Gbps (100 Gbps/¿). Atès que el mercat de sistemes de curt abast compren un gran volum de dispositius òptics instal·lats, el cost unitari és molt important i ha de ser el més baix possible. L'objectiu d'aquesta tesi és analitzar aspectes del processament de senyal en general i, específicament, investigar noves tècniques de processament digital de senyal (DSP, digital signal processing) que puguen ser utilitzades en sistemes de transmissió òptica no-coherent que utilitzen la modulació per amplitud d'impulsos (PAM, pulse-amplitude modulation). Per tal que una tècnica DSP es considere interessant per a una xarxa òptica WDM no-coherent, aquesta ha de mitigar efectivament almenys una de les tres principals limitacions que afecten aquests sistemes: limitacions d'ample de banda, limitacions per dispersió cromàtica (CD), i el soroll. En aquesta tesi s'examinen una sèrie d'algoritmes, el seu rendiment s'analitza per simulació i experimentalment en laboratori: - Feed-forward equalizer (FFE): aquest és l'esquema d'equalització més comú i s'utilitza bàsicament en les transmissions òptiques no coherents d'alt règim binari. Pot compensar grans quantitats de limitacions d'ample de banda. - Estimació de la seqüència de probabilitat màxima (MLSE): el MLSE és un detector òptim i, per tant, proporciona el millor rendiment quan es tracta de limitacions d'ample de banda i de CD. - Conformació geomètrica de la constel·lació: en esquemes de modulació òptica d'intensitat multinivell es pot ajustar la distància entre els nivells d'amplitud (de manera que ja no són equidistants) per augmentar la tolerància del senyal al soroll. - Conformació probabilística: una tècnica dissenyada específicament per als esquemes de modulació multinivell; ajusta la probabilitat de cada nivell d'amplitud de manera que augmenta la tolerància al soroll òptic. - Senyalització de resposta parcial (PRS, partial signaling response): és un enfocament basat en DSP on la interferència entre símbols (ISI, inter-symbol interference) controlada s'introdueix intencionalment de manera que el senyal resultant requereix menys ample de banda. La tècnica PRS es pot adaptar per combatre els efectes del CD. - Pre-èmfasi digital (DPE, digital pre-emphasis): aquesta tècnica consisteix a aplicar la inversió de la funció de transferència del sistema a la senyal en el transmissor de manera que es redueix l'impacte de les limitacions d'ample de banda en la senyal en el receptor. - Modulació amb codificació Trellis (TCM, Trellis-coded modulation): esquema de modulació que combina els elements de correcció d'errors avançats (FEC, forward error correction) amb tècniques de partionament de conjunts i modulació multidimensional per generar un senyal més resistent al soroll. - Modulació multidimensional per partició en conjuntes: molt similar a TCM però sense elements FEC. Té guanys menors que TCM en termes de tolerància al soroll, però no és tan sensible a l'ISI. Mitjançant l'ús d'aquestes tècniques, aquesta tesi demostra que és possible aconseguir una transmissió òptica amb un règim binari de 100 Gbps/¿ utilitzant components de baix cost. Esta tesi també demostra règims binaris de més de 200 Gbps, el que indica que la tecnologia no-coherent amb modulació PAM és una solució viable i eficient en cost per a una nova generació de sistemes transceptors òptics WDM funcionant a 800 Gbps (4¿×200 G[EN] Non-coherent optical transmission systems are currently employed in short-reach optical networks (reach shorter than 80 km), like metro networks. The most common implementation in the state-of-the-art is the four wavelength (¿) 100 Gbps (4¿×25 Gbps) wavelength division multiplexing (WDM) transceiver. In recent years non-coherent optical transmissions are evolving from 100 Gbps to 400 Gbps (4¿×100 Gbps). Since in the short-reach market the volume of optical devices being deployed is very large, the cost-per-unit of the devices is very important, and it should be as low as possible. The goal of this thesis is to investigate some general signal processing aspects and, specifically, digital signal processing (DSP) techniques required in non-coherent pulse-amplitude modulation (PAM) optical transmission, and also to investigate novel algorithms which could be applied to this application scenario. In order for a DSP technique to be considered an interesting solution for non-coherent WDM optical networks it has to effectively mitigate at least one of the three main impairments affecting such systems: bandwidth limitations, chromatic dispersion (CD) and noise (in optical or electrical domain). A series of algorithms are proposed and examined in this thesis, and their performance is analyzed by simulation and also experimentally in the laboratory: - Feed-forward equalization (FFE): this is the most common equalizer and it is basically employed in every high-speed non-coherent optical transmission. It can compensate high bandwidth limitations. - Maximum likelihood sequence estimation (MLSE): the MLSE is the optimum detector and thus provides the best performance when it comes to dealing with CD and bandwidth limitations. - Geometrical constellation shaping: in multilevel optical intensity modulation schemes the distance between amplitude levels can be adjusted (such that they are no longer equidistant) in order to increase the signal's tolerance to noise. - Probabilistic shaping: another technique designed specifically for multilevel modulation schemes; it adjusts the probability of each amplitude level such that the tolerance to optical noise is increased. - Partial response signaling (PRS): this is a DSP-based approach where a controlled inter-symbol interference (ISI) is intentionally introduced in such a way that the resulting signal requires less bandwidth. PRS can be customized to also mitigate CD impairment, effectively increasing transmission distances up to three times. - Digital pre-emphasis (DPE): this technique consists in applying the inverse of the transfer function of the system to the signal at the transmitter side which reduces the impact of bandwidth limitations on the signal at the receiver side. - Trellis-coded modulation (TCM): a modulation scheme that combines forward error correction (FEC) elements with set-partitioning techniques and multidimensional modulation to generate a signal that is more resistant to noise. - Multidimensional set-partitioned modulation: very similar with TCM but without any FEC elements. It has lower gains than TCM in terms of noise tolerance but is not so sensitive to ISI. By using the techniques enumerated above, this thesis demonstrates that is possible to achieve 100 Gbps/¿ optical transmission bitrate employing cost-effective components. Even more, bitrates higher than 200 Gbps are also demonstrated, indicating that non-coherent PAM is a viable cost-effective solution for next-generation 800 Gbps (4¿×200 Gbps) WDM transceivers.Prodaniuc, C. (2019). Advanced Signal Processing for Pulse-Amplitude Modulation Optical Transmission Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/117315TESI

Towards Higher Speed Next Generation Passive Optical Networks

L'abstract è presente nell'allegato / the abstract is in the attachmen

Physical layer forward error correcetion in DVB-S2 networks.

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2012.The rapid growth of wireless systems has shown little sign of ceasing, due to increased consumer demand for reliable interactive services. A key component of the development has centered on satellite networks, which allows provision of services in scenarios where terrestrial systems are not viable. The Digital Video Broadcasting-Satellite Second Generation (DVB-S2) standard was developed for use in satellite broadcast applications, the foremost being video broadcasting. Inherent to DVB-S2 is a powerful forward error correction (FEC) module, present in both the Physical and Data Link Layer. Improving the error correcting capability of the FEC is a natural advent in improving the quality of service of the protocol. This is more crucial in real time satellite video broadcast where retransmission of data is not viable, due to high latency. The Physical Layer error correcting capability is implemented in the form of a concatenated BCH-LDPC code. The DVB-S2 standard does not define the decoding structure for the receiver system however many powerful decoding systems have been presented in the literature; the Belief Propagation-Chase concatenated decoder being chief amongst them. The decoder utilizes the concept of soft information transfer between the Chase and Belief Propagation (BP) decoders to provide improved error correcting capability above that of the component decoders. The following dissertation is motivated by the physical layer (PL) FEC scheme, focused on the concatenated Chase-BP decoder. The aim is to generate results based on the BP-Chase decoder in a satellite channel as well as improve the error correcting capability. The BP-Chase decoder has shown to be very powerful however the current literature provides performance results only in AWGN channels. The AWGN channel however is not an accurate representation of a land-mobile satellite (LMS) channel; it does not consider the effect of shadowing, which is prevalent in satellite systems. The development of Markov chain models have allowed for better description of the characteristics of the LMS channel. The outcome being the selection of a Ku band LMS channel model. The selected LMS channel model is composed of 3 states, each generating a different degree of shadowing. The PL system has been simulated using the LMS channel and BP-Chase receiver to provide a more accurate representation of performance of a DVB-S2 network. The effect of shadowing has shown to reduce coding performance by approximately 4dB, measured over several code lengths and decoders, when compared with AWGN performance results. The second body of work aims to improve the error correcting capability of the BP-Chase decoder, concentrating on improving the LDPC decoding module performance. The LDPC system is the basis for the powerful error correcting ability of the concatenated scheme. In attempting to improve the LDPC decoder a reciprocal improvement is expected in the overall decoding performance of the concatenated decoder. There have been several schemes presented which improve BP performance. The BP-Ordered statistics decoder (OSD) was selected through a process of literary review; a novel decoding structure is presented incorporating the BP-OSD decoder into the BP-Chase structure. The result of which is the BP-OSD-Chase decoder. The decoder contains two stages of concatenation; the first stage implements the BPOSD algorithm which decodes the LDPC code and the second stage decodes the BCH code using the Chase algorithm. Simulation results of the novel decoder implementation in the DVBS2 PL show a coding gain of 0.45dB and 0.15dB versus the BP and BP-Chase decoders respectively, across both the AWGN and LMS channel

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression