Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Controlo de congestionamento em redes sem fios

Doutoramento em Engenharia ElectrotécnicaCongestion control in wireless networks is an important and open issue. Previous research has proven the poor performance of the Transport Control Protocol (TCP) in such networks. The factors that contribute to the poor performance of TCP in wireless environments concern its unsuitability to identify/detect and react properly to network events, its TCP window based ow control algorithm that is not suitable for the wireless channel, and the congestion collapse due to mobility. New rate based mechanisms have been proposed to mitigate TCP performance in wired and wireless networks. However, these mechanisms also present poor performance, as they lack of suitable bandwidth estimation techniques for multi-hop wireless networks. It is thus important to improve congestion control performance in wireless networks, incorporating components that are suitable for wireless environments. A congestion control scheme which provides an e - cient and fair sharing of the underlying network capacity and available bandwidth among multiple competing applications is crucial to the definition of new e cient and fair congestion control schemes on wireless multi-hop networks. The Thesis is divided in three parts. First, we present a performance evaluation study of several congestion control protocols against TCP, in wireless mesh and ad-hoc networks. The obtained results show that rate based congestion control protocols need an eficient and accurate underlying available bandwidth estimation technique. The second part of the Thesis presents a new link capacity and available bandwidth estimation mechanism denoted as rt-Winf (real time wireless inference). The estimation is performed in real-time and without the need to intrusively inject packets in the network. Simulation results show that rt-Winf obtains the available bandwidth and capacity estimation with accuracy and without introducing overhead trafic in the network. The third part of the Thesis proposes the development of new congestion control mechanisms to address the congestion control problems of wireless networks. These congestion control mechanisms use cross layer information, obtained by rt-Winf, to accurately and eficiently estimate the available bandwidth and the path capacity over a wireless network path. Evaluation of these new proposed mechanisms, through ns-2 simulations, shows that the cooperation between rt-Winf and the congestion control algorithms is able to significantly increase congestion control eficiency and network performance.O controlo de congestionamento continua a ser extremamente importante quando se investiga o desempenho das redes sem fios. Trabalhos anteriores mostram o mau desempenho do Transport Control Proto- col (TCP) em redes sem fios. Os fatores que contribuem para um pior desempenho do TCP nesse tipo de redes s~ao: a sua falta de capacidade para identificar/detetar e reagir adequadamente a eventos da rede; a utilização de um algoritmo de controlo de uxo que não é adequado para o canal sem fios; e o colapso de congestionamento devido á mobilidade. Para colmatar este problemas foram propostos novos mecanismos de controlo de congestionamento baseados na taxa de transmissão. No entanto, estes mecanismos também apresentam um pior desempenho em redes sem fios, já que não utilizam mecanismos adequados para a avaliação da largura de banda disponível. Assim, é importante para melhorar o desempenho do controlo de congestionamento em redes sem fios, incluir componentes que são adequados para esse tipo de ambientes. Um esquema de controlo de congestionamento que permita uma partilha eficiente e justa da capacidade da rede e da largura de banda disponível entre múltiplas aplicações concorrentes é crucial para a definição de novos, eficientes e justos mecanismos de controlo congestionamento para as redes sem fios. A Tese está dividida em três partes. Primeiro, apresentamos um estudo sobre a avaliação de desempenho de vários protocolos de controlo de congestionamento relativamente ao TCP, em redes sem fios em malha e ad-hoc. Os resultados obtidos mostram que os protocolos baseados na taxa de transmissão precisam de uma técnica de avaliação da largura de banda disponível que seja eficiente e precisa . A segunda parte da Tese apresenta um novo mecanismo de avaliação da capacidade da ligação e da largura de banda disponível, designada por rt-Winf (real time wireless inference). A avaliação é realizada em tempo real e sem a necessidade de inserir tráfego na rede. Os resultados obtidos através de simulação e emulação mostram que o rt-Winf obtém com precisão a largura de banda disponível e a capacidade da ligação sem sobrecarregar a rede. A terceira parte da Tese propõe novos mecanismos de controlo de congestionamento em redes sem fios. Estes mecanismos de controlo de congestionamento apresentam um conjunto de caracter ísticas novas para melhorar o seu desempenho, de entre as quais se destaca a utilização da informação de largura de banda disponível obtida pelo rt-Winf. Os resultados da avaliação destes mecanismos, utilizando o simulador ns-2, permitem concluir que a cooperação entre o rt-Winf e os algoritmos de controlo de congestionamento aumenta significativamente o desempenho da rede

Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues. The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies). The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks. Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications. The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way. The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools. This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks. Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research. It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites. The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation

Adaptive protocols for mobile ad hoc networks

Recent advances in low-power technologies have resulted in the proliferation of inexpensive handheld mobile computing devices. Soon, just like the Internet empow- ered a whole new world of applications for personal computers, the development and deployment of robust ubiquitous wireless networks will enable many new and exciting futuristic applications. Certain to be an important part of this future is a class of networks known as "mobile ad hoc networks." Mobile ad hoc networks (or simply "ad hoc networks") are local-area networks formed "on the spot" between collocated wireless devices. These devices self-organize by sharing information with their neigh- bors to establish communication pathways whenever and wherever they are. For ad hoc networks to succeed, however, new protocols must be developed that are capable of adapting to their dynamic nature. In this dissertation, we present a number of adaptive protocols that are designed for this purpose. We investigate new link layer mechanisms that dynamically monitor and adapt to changes in link quality, including a protocol that uses common control messages to form a tight feedback control loop for adaptation of the link data rate to best match the channel conditions perceived by the receiver. We also investigate routing protocols that adapt route selection according to network characteristics. In particular, we present two on-demand routing protocols that are designed to take advantage of the presence of multirate links. We then investigate the performance of TCP, showing how communication outages caused by link failures and routing delays can be very detrimental to its performance. In response, we present a solution to this problem that uses explicit feedback messages from the link layer about link failures to adapt TCP's behavior. Finally, we show how link failures in heterogeneous networks containing links with widely varying bandwidth and delay can cause repeated "modal" changes in capacity that TCP is slow to detect. We then present a modifed version of TCP that is capable of more rapidly detecting and adapting to these changes

Design and Evaluation of Efficient Medium Access Control Solutions for Vehicular Environments

[EN] In recent years, advances in wireless technologies and improved sensing and computational capabilities have led to a gradual transition towards Intelligent Transportation Systems (ITS) and related applications. These applications aim at improving road safety, provide smart navigation, and eco-friendly driving. Vehicular Ad hoc Networks (VANETs) provide a communication structure for ITS by equipping cars with advanced sensors and communication devices that enable a direct exchange of information between vehicles. Different types of ITS applications rely on two types of messages: periodic beacons and event-driven messages. Beacons include information such as geographical location, speed, and acceleration, and they are only disseminated to a close neighborhood. Differently from beacons, event-driven messages are only generated when a critical event of general interest occurs, and it is spread within a specific target area for the duration of the event. The reliability of information exchange is one of the main issues for vehicularcommunications since the safety of people on the road is directly related to the effectiveness of these transmissions. A Medium Access Control (MAC) protocol must guarantee reliable beacon broadcasting within deadline bounds to all vehicles in the neighbourhood, thereby providing them timely notifications about unsafe driving conditions or other hazardous events. Moreover, infotainment and comfort applications require reliable unicast transmissions that must be taken into account. However, high node mobility, highly dynamic topology, and lack of a central control unit, are issues that make the design of a reliable MAC protocol for vehicular environments a very difficult and challenging task, especially when efficient broadcasting strategies are required. The IEEE 802.11p MAC protocol, an approved amendment to the IEEE 802.11 standard, is a random access protocol that is unable to provide guaranteed delay bounds with sufficient reliability in vehicular scenarios, especially under high channel usage. This problem is particularly serious when implementing (semi-) automated driving applications such as platooning, where inter-vehicle spacing is drastically reduced, and the control loop that manages and maintains the platoon requires frequent, timely and reliable exchange of status information (beacons). In this thesis novel protocols compatible with the IEEE 802.11 and 802.11p standards are proposed in order to optimally adjust the contention window size for unicast applications in Mobile Ad hoc Networks (MANETs) and VANETs. Experimental tests comparing our proposals to existing solutions show that the former are able to improve the packet delivery ratio and the average end-to-end delay for unicast applications. Concerning efficient message diffusion (broadcast) in VANET environments, we proposed token-based MAC solutions to improve the performance achieved by existing 802.11p driving safety applications in different vehicular environments, including highway, urban, and platooning scenarios. Experimental results show that the proposed solutions clearly outperform 802.11p when delay-bounded beacons and event notifications must be delivered.[ES] Recientemente, los avances en las tecnologías inalámbricas y las mejoras en términos de capacidades de sensorización y computación de los dispositivos electrónicos, han dado lugar a una transición gradual hacia servicios y aplicaciones de los Sistemas Inteligentes de Transporte (ITS). Estas aplicaciones tienen como objetivo mejorar la seguridad vial, proporcionar una navegación inteligente, y promover la conducción eco-eficiente. Las redes vehiculares ad hoc (VANETs) proporcionan una infraestructura de comunicaciones para ITS al equipar los coches con sensores avanzados y dispositivos de comunicación que permiten el intercambio directo de información entre vehículos. Los diferentes tipos de aplicaciones ITS se basan en dos tipos de mensajes: mensajes periódicos conocidos como beacons y mensajes asociados a eventos. Los mensajes periódicos incluyen información relativa a la ubicación geográfica, la velocidad y la aceleración, entre otros, y sólo son distribuidos entre los vehículos vecinos. A diferencia de estos beacons, los mensajes asociados a eventos sólo se generan cuando se produce un evento crítico de interés general, el cual se propaga dentro del área de interés de dicho evento y mientras éste siga activo. La fiabilidad del intercambio de información es uno de los principales problemas para las comunicaciones vehiculares, debido principalmente a que las aplicaciones de seguridad dependen directamente de la eficacia de estas transmisiones. Un protocolo de Control de Acceso al Medio (MAC) debe garantizar la difusión fiable de información a todos los vehículos vecinos dentro de unos límites máximos de retardo, proporcionándoles las notificaciones oportunas respecto a condiciones de conducción inseguras y otros eventos peligrosos. Por otra parte, las aplicaciones de información y entretenimiento, así como las aplicaciones orientadas al confort, también requieren transmisiones fiables extremoa-extremo. Sin embargo, la alta movilidad de los vehículos, la variabilidad de la topología, así como la falta de una unidad central de control, son factores que hacen que el diseño de un protocolo MAC fiable para entornos vehiculares sea una tarea especialmente compleja, especialmente cuando son necesarias estrategias de difusión eficientes. El protocolo MAC IEEE 802.11p, una modificación ya aprobada al estándar IEEE 802.11 original para entornos de comunicación vehiculares, es un protocolo de acceso que no es capaz de garantizar unos límites de retardo con la fiabilidad necesaria para estos entornos, especialmente en escenarios de alta utilización del canal inalámbrico. Este problema es particularmente importante a la hora de implementar aplicaciones de conducción (semi-)automática, como el caso de grupos de vehículos donde la separación entre vehículos se reduce drásticamente, y el sistema de control que gestiona y mantiene el grupo requiere de un intercambio frecuente de información fiable y acotado en retardo. En esta tesis se proponen nuevos protocolos MAC compatibles con los estándares IEEE 802.11 y 802.11p basados en el ajuste del tamaño de la ventana de contención para aplicaciones unicast en rede MANETs y VANETs. Los resultados experimentales obtenidos comparando nuestras propuestas con las soluciones existentes muestran que los protocolos propuestos son capaces de mejorar la tasa de entrega de paquetes y el retardo medio extremo-a-extremo para aplicaciones unicast. En lo que respecta a la difusión eficiente de mensajes broadcast en entornos VANET, se han propuesto soluciones MAC basadas en el uso de tokens que mejoran las prestaciones de aplicaciones de conducción segura basadas en el estándar 802.11p, tanto en autopistas, zonas urbanas, y escenarios con grupos de vehículos. Los resultados experimentales muestran que las soluciones propuestas superan claramente al protocolo 802.11p cuando es necesario entregar mensajes y notificaciones de eventos con restricc[CA] Recentment, els avan en les tecnologies sense fils i les millores en termes de capacitats de sensorització i computació dels dispositius electrònics, han donat lloc a una transició gradual cap a serveis i aplicacions dels sistemes intelligents de transport (ITS). Aquestes aplicacions tenen com a objectiu millorar la seguretat vial, proporcionar una navegació intelligent, i promoure la conducció ecoeficient. Les xarxes vehiculars ad hoc (VANET) proporcionen una infraestructura de comunicacions per a ITS, ja que equipen els cotxes amb sensors avançats i dispositius de comunicació que permeten l'intercanvi directe d'informació entre vehicles. Els diversos tipus d'aplicacions ITS es basen en dos classes de missatges: missatges periòdics coneguts com a beacons i missatges associats a esdeveniments. Els missatges periòdics inclouen informació relativa a la ubicació geogràfica, la velocitat i l'acceleració, entre uns altres, i només són distribuïts entre els vehicles veïns. A diferència d'aquests beacons, els missatges associats a esdeveniments només es generen quan es produeix un esdeveniment crític d'interès general, el qual es propaga dins de l àrea d'interès d'aquest esdeveniment i mentre aquest seguisca actiu. La fiabilitat de l'intercanvi d'informació és un dels principals problemes per a les comunicacions vehicular, principalment perquè les aplicacions de seguretat depenen directament de l'eficàcia d'aquestes transmissions. Un protocol de control d'accés al medi (MAC) ha de garantir la difusió fiable d'informació a tots els vehicles veïns dins d'uns límits màxims de retard, i proporcionar-los les notificacions oportunes respecte a condicions de conducció insegures i altres esdeveniments perillosos. D'altra banda, les aplicacions d'informació i entreteniment, com també les aplicacions orientades al confort, també requereixen transmissions fiables extrema-extrem. No obstant això, l'alta mobilitat dels vehicles, la variabilitat de la topologia, i la falta d'una unitat central de control, són factors que fan que el disseny d'un protocol MAC fiable per a entorns vehiculars siga una tasca especialment complexa, especialment quan són necessàries estratègies de difusió eficients. El protocol MAC IEEE 802.11p, una modificació ja aprovada a l'estàndard IEEE 802.11 original per a entorns de comunicació vehiculars, és un protocol d'accés que no és capa garantir uns límits de retard amb la fiabilitat necessària per a aquests entorns, especialment en escenaris d'alta utilització del canal sense fil. Aquest problema és particularment important a l'hora d'implementar aplicacions de conducció (semi)automàtica, com el cas de grups de vehicles en què la separació entre vehicles es redueix dràsticament, i el sistema de control que gestiona i manté el grup requereix un intercanvi freqüent d'informació fiable i delimitat en retard. En aquesta tesi es proposen nous protocols MAC compatibles amb els estàndards IEEE 802.11 i 802.11p basats en l'ajust de les dimensions de la finestra de contenció per a aplicacions unicast en xarxes MANET i VANET. Els resultats experimentals obtinguts comparant les nostres propostes amb les solucions existents mostren que els protocols proposats són capa de millorar la taxa de lliurament de paquets i el retard mitjà extrem-a-extrem per a aplicacions unicast. Pel que fa a la difusió eficient de missatges broadcast en entorns VANET, s'han proposat solucions MAC basades en l'ús de tokens que milloren les prestacions d'aplicacions de conducció segura basades en l'estàndard 802.11p, tant en autopistes, zones urbanes, i escenaris amb grups de vehicles. Els resultats experimentals mostren que les solucions proposades superen clarament el protocol 802.11p quan cal lliurar missatges i notificacions d'esdeveniments amb restriccions de latència.Balador, A. (2016). Design and Evaluation of Efficient Medium Access Control Solutions for Vehicular Environments [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/64073TESI

Measurement-Driven Algorithm and System Design for Wireless and Datacenter Networks

The growing number of mobile devices and data-intensive applications pose unique challenges for wireless access networks as well as datacenter networks that enable modern cloud-based services. With the enormous increase in volume and complexity of traffic from applications such as video streaming and cloud computing, the interconnection networks have become a major performance bottleneck. In this thesis, we study algorithms and architectures spanning several layers of the networking protocol stack that enable and accelerate novel applications and that are easily deployable and scalable. The design of these algorithms and architectures is motivated by measurements and observations in real world or experimental testbeds. In the first part of this thesis, we address the challenge of wireless content delivery in crowded areas. We present the AMuSe system, whose objective is to enable scalable and adaptive WiFi multicast. AMuSe is based on accurate receiver feedback and incurs a small control overhead. This feedback information can be used by the multicast sender to optimize multicast service quality, e.g., by dynamically adjusting transmission bitrate. Specifically, we develop an algorithm for dynamic selection of a subset of the multicast receivers as feedback nodes which periodically send information about the channel quality to the multicast sender. Further, we describe the Multicast Dynamic Rate Adaptation (MuDRA) algorithm that utilizes AMuSe's feedback to optimally tune the physical layer multicast rate. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications. We implemented the AMuSe system on the ORBIT testbed and evaluated its performance in large groups with approximately 200 WiFi nodes. Our extensive experiments demonstrate that AMuSe can provide accurate feedback in a dense multicast environment. It outperforms several alternatives even in the case of external interference and changing network conditions. Further, our experimental evaluation of MuDRA on the ORBIT testbed shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of nodes while meeting quality requirements. As an example application, MuDRA can support multiple high quality video streams, where 90% of the nodes report excellent or very good video quality. Next, we specifically focus on ensuring high Quality of Experience (QoE) for video streaming over WiFi multicast. We formulate the problem of joint adaptation of multicast transmission rate and video rate for ensuring high video QoE as a utility maximization problem and propose an online control algorithm called DYVR which is based on Lyapunov optimization techniques. We evaluated the performance of DYVR through analysis, simulations, and experiments using a testbed composed of Android devices and o the shelf APs. Our evaluation shows that DYVR can ensure high video rates while guaranteeing a low but acceptable number of segment losses, buffer underflows, and video rate switches. We leverage the lessons learnt from AMuSe for WiFi to address the performance issues with LTE evolved Multimedia Broadcast/Multicast Service (eMBMS). We present the Dynamic Monitoring (DyMo) system which provides low-overhead and real-time feedback about eMBMS performance. DyMo employs eMBMS for broadcasting instructions which indicate the reporting rates as a function of the observed Quality of Service (QoS) for each UE. This simple feedback mechanism collects very limited QoS reports which can be used for network optimization. We evaluated the performance of DyMo analytically and via simulations. DyMo infers the optimal eMBMS settings with extremely low overhead, while meeting strict QoS requirements under different UE mobility patterns and presence of network component failures. In the second part of the thesis, we study datacenter networks which are key enablers of the end-user applications such as video streaming and storage. Datacenter applications such as distributed file systems, one-to-many virtual machine migrations, and large-scale data processing involve bulk multicast flows. We propose a hardware and software system for enabling physical layer optical multicast in datacenter networks using passive optical splitters. We built a prototype and developed a simulation environment to evaluate the performance of the system for bulk multicasting. Our evaluation shows that the optical multicast architecture can achieve higher throughput and lower latency than IP multicast and peer-to-peer multicast schemes with lower switching energy consumption. Finally, we study the problem of congestion control in datacenter networks. Quantized Congestion Control (QCN), a switch-supported standard, utilizes direct multi-bit feedback from the network for hardware rate limiting. Although QCN has been shown to be fast-reacting and effective, being a Layer-2 technology limits its adoption in IP-routed Layer 3 datacenters. We address several design challenges to overcome QCN feedback's Layer- 2 limitation and use it to design window-based congestion control (QCN-CC) and load balancing (QCN-LB) schemes. Our extensive simulations, based on real world workloads, demonstrate the advantages of explicit, multi-bit congestion feedback, especially in a typical environment where intra-datacenter traffic with short Round Trip Times (RTT: tens of s) run in conjunction with web-facing traffic with long RTTs (tens of milliseconds)

Interoperability of wireless communication technologies in hybrid networks : evaluation of end-to-end interoperability issues and quality of service requirements

Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues. The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies). The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks. Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications. The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way. The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools. This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks. Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research. It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites. The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Interaktive latenzkritische Anwendungen in mobilen Ad-hoc Netzen

In this thesis we discuss the challenges that latency-sensitive interactive applications face in mobile ad-hoc networks. By using multi-player games as an example, we argue that the traditional client-server architecture is unsuitable for this new environment. We consequently create a novel communication architecture as well as quality of service mechanisms that can support the network requirements of such applications in mobile environments. By using a number of distributed zone servers that are selected and managed dynamically by our server selection algorithm, we provide a scalable approach that offers the necessary redundancy. Furthermore, we propose additional quality of service mechanisms to reduce latency and packet loss for interactive applications. We evaluate our approach through network simulation and realistic mobile gaming scenarios. The performance of our evaluation is checked against real-world measurements.In dieser Arbeit werden die Probleme und Herausforderungen von latenz-kritischen interactiven Computeranwendungen in mobilen Ad-hoc Netzen untersucht. Am Beispiel von Mehrbenutzercomputerspielen zeigen wir, dass traditionelle Client-Server Architekturen für diese neuen Umgebungen ungeeignet sind. Im Rahmen dieser Arbeit wird daher eine neue Kommunikationsarchitektur sowie verschiedene Mechanismen zur Erhöhung der Dienstgüte vorgeschlagen. Mit Hilfe von Zonenserver, die durch den Serverauswahlalgorithmus ausgesucht und verwaltet werden zeigen wir einen Ansatz auf, der sowohl bezüglich der Netzgröße skalierbar ist als auch die notwendige Redundanz bereitstellt. Wir zeigen die Funktionalität und die Leistung unseres Ansatzes mit Hilfe von Netzsimulationen bei denen realistische Szenarien für mobiles Spielen simuliert werden. Der hierbei benutze Netzsimulator wurde dafür auf Basis von eigenen Messungen verbessert und für das jeweilige Szenario passend eingestellt

Probabilistic route discovery for Wireless Mobile Ad Hoc Networks (MANETs)

Mobile wireless ad hoc networks (MANETs) have become of increasing interest in view of their promise to extend connectivity beyond traditional fixed infrastructure networks. In MANETs, the task of routing is distributed among network nodes which act as both end points and routers in a wireless multi-hop network environment. To discover a route to a specific destination node, existing on-demand routing protocols employ a broadcast scheme referred to as simple flooding whereby a route request packet (RREQ) originating from a source node is blindly disseminated to the rest of the network nodes. This can lead to excessive redundant retransmissions, causing high channel contention and packet collisions in the network, a phenomenon called a broadcast storm. To reduce the deleterious impact of flooding RREQ packets, a number of route discovery algorithms have been suggested over the past few years based on, for example, location, zoning or clustering. Most such approaches however involve considerably increased complexity requiring additional hardware or the maintenance of complex state information. This research argues that such requirements can be largely alleviated without sacrificing performance gains through the use of probabilistic broadcast methods, where an intermediate node rebroadcasts RREQ packets based on some suitable forwarding probability rather than in the traditional deterministic manner. Although several probabilistic broadcast algorithms have been suggested for MANETs in the past, most of these have focused on “pure” broadcast scenarios with relatively little investigation of the performance impact on specific applications such as route discovery. As a consequence, there has been so far very little study of the performance of probabilistic route discovery applied to the well-established MANET routing protocols. In an effort to fill this gap, the first part of this thesis evaluates the performance of the routing protocols Ad hoc On demand Distance Vector (AODV) and Dynamic Source Routing (DSR) augmented with probabilistic route discovery, taking into account parameters such as network density, traffic density and nodal mobility. The results reveal encouraging benefits in overall routing control overhead but also show that network operating conditions have a critical impact on the optimality of the forwarding probabilities. In most existing probabilistic broadcast algorithms, including the one used here for preliminary investigations, each forwarding node is allowed to rebroadcast a received packet with a fixed forwarding probability regardless of its relative location with respect to the locations of the source and destination pairs. However, in a route discovery operation, if the location of the destination node is known, the dissemination of the RREQ packets can be directed towards this location. Motivated by this, the second part of the research proposes a probabilistic route discovery approach that aims to reduce further the routing overhead by limiting the dissemination of the RREQ packets towards the anticipated location of the destination. This approach combines elements of the fixed probabilistic and flooding-based route discovery approaches. The results indicate that in a relatively dense network, these combined effects can reduce the routing overhead very significantly when compared with that of the fixed probabilistic route discovery. Typically in a MANET there are regions of varying node density. Under such conditions, fixed probabilistic route discovery can suffer from a degree of inflexibility, since every node is assigned the same forwarding probability regardless of local conditions. Ideally, the forwarding probability should be high for a node located in a sparse region of the network while relatively lower for a node located in a denser region of the network. As a result, it can be helpful to identify and categorise mobile nodes in the various regions of the network and appropriately adjust their forwarding probabilities. To this end the research examines probabilistic route discovery methods that dynamically adjust the forwarding probability at a node, based on local node density, which is estimated using number of neighbours as a parameter. Results from this study return significantly superior performance measures compared with fixed probabilistic variants. Although the probabilistic route discovery methods suggested above can significantly reduce the routing control overhead without degrading the overall network throughput, there remains the problem of how to select efficiently forwarding probabilities that will optimize the performance of a broadcast under any given conditions. In an attempt to address this issue, the final part of this thesis proposes and evaluates the feasibility of a node estimating its own forwarding probability dynamically based on locally collected information. The technique examined involves each node piggybacking a list of its 1-hop neighbours in its transmitted RREQ packets. Based on this list, relay nodes can determine the number of neighbours that have been already covered by a broadcast and thus compute the forwarding probabilities most suited to individual circumstances