Leak test system

System for quantitative determination of leak rates in large pressurized compartments is described. Method uses pressure reference cylinder placed in thermal contact with internal environment of compartment. Construction of equipment and details of operational procedure are reported. Illustration of equipment is included

Insulation bonding test system

A method and a system for testing the bonding of foam insulation attached to metal is described. The system involves the use of an impacter which has a calibrated load cell mounted on a plunger and a hammer head mounted on the end of the plunger. When the impacter strikes the insulation at a point to be tested, the load cell measures the force of the impact and the precise time interval during which the hammer head is in contact with the insulation. This information is transmitted as an electrical signal to a load cell amplifier where the signal is conditioned and then transmitted to a fast Fourier transform (FFT) analyzer. The FFT analyzer produces energy spectral density curves which are displayed on a video screen. The termination frequency of the energy spectral density curve may be compared with a predetermined empirical scale to determine whether a igh quality bond, good bond, or debond is present at the point of impact

Value Analysis Information System Test on Senior High School Perguruan Cikini

Analysis of information systems is to understand the complex system and then makemodifications in several ways. The result of these modifications can form a newsubsystem or a new component or set of new transformations, in which the goal is toimprove the various functions of the system. To change the target system, change theoutput, achieve the same goal with another set of inputs or to make similarimprovements.The need for fast information systems analysis and accurate research is needed that isby the research literature and conduct field research data and information on therunning system.From results of this analysis is expected to produce an effective work processes andinefficient in terms of continuity of work processes of an organization or institution

Test stand system for vacuum chambers

A test stand system for supporting test items in a vacuum chamber is described. The system consists of a frame adapted to conform to the inside of the vacuum chamber and supporting a central vertical shaft. The shaft rotates on bearings located at each end of the shaft. Several vertically spaced plates which fixed to the vertical shaft may be adjusted for height to support the test equipment as required. The test equipment may be rotated during tests without disturbing the vacuum by a manually actuated drive external to the vacuum chamber

Do System Test Cases Grow Old?

Companies increasingly use either manual or automated system testing to ensure the quality of their software products. As a system evolves and is extended with new features the test suite also typically grows as new test cases are added. To ensure software quality throughout this process the test suite is continously executed, often on a daily basis. It seems likely that newly added tests would be more likely to fail than older tests but this has not been investigated in any detail on large-scale, industrial software systems. Also it is not clear which methods should be used to conduct such an analysis. This paper proposes three main concepts that can be used to investigate aging effects in the use and failure behavior of system test cases: test case activation curves, test case hazard curves, and test case half-life. To evaluate these concepts and the type of analysis they enable we apply them on an industrial software system containing more than one million lines of code. The data sets comes from a total of 1,620 system test cases executed a total of more than half a million times over a time period of two and a half years. For the investigated system we find that system test cases stay active as they age but really do grow old; they go through an infant mortality phase with higher failure rates which then decline over time. The test case half-life is between 5 to 12 months for the two studied data sets.Comment: Updated with nicer figs without border around the

Lightning current test on radar system

With the extended use of very sensitive electronic components, in modern systems, the danger represented by a lightning stroke becomes something not to be neglected. The Long Range Radar requires protection not only against direct strike, but also against the indirect effects. The formulation of the military standard MIL-STD-464A Severe Strike confirms this need. The peak currents of the discharges are between 50 and 200 kA, for the A pulse, 2 kA for the B pulse and 200 to 800 Amps for the C pulse. For a radar system placed high on a ship, the chosen approach is the fictitious Rolling Sphere Technique in order to confirm the protection offered by the design. Experiments have been carried out using a test setup that could duplicate the three discharge components

Hybrid holographic non-destructive test system

An automatic hybrid holographic non-destructive testing (HNDT) method and system capable of detecting flaws or debonds contained within certain materials are described. This system incorporates the techniques of optical holography, acoustical/optical holography and holographic correlation in determining the structural integrity of a test object. An automatic processing system including a detector and automatic data processor is used in conjunction with the three holographic techniques for correlating and interpreting the information supplied by the non-destructive systems. The automatic system also includes a sensor which directly translates an optical data format produced by the holographic techniques into electrical signals and then transmits this information to a digital computer for indicating the structural properties of the test object. The computer interprets the data gathered and determines whether further testing is necessary as well as the format of this new testing procedure

Test Appraisal System Application Based on YII Framework as Media Input Student Value Final Project and Thesis Session at Higher Education

System development is a form of effort to improve the quality of the system to be more innovative. Raharja College is a college of computer science that has many systems to support its academic activities. At Raharja College there is a Thesis Session Assessment and Final Assignment system which makes it easy for lecturers as a media to provide a thesis trial or final assignment assessment. The Testing Assessment System is very important in the process of running a thesis trial or final assignment, because it makes it easier for lecturers to provide an assessment of the results of student thesis research. However, in the current assessment system, the testers have problems, which are still using local networks, which of course still use UTP cables as their connector. by online. In the development of the scoring system these testers use the method of swot analysis and elicitation. And use one of the PHP Framework, Yii Framework

Analysis of test system misalignment in the creep test

Sheet type rectangular 1100-0 aluminum specimens were tested. The creep strain at the geometric centerline of the specimen is different than that at the neutral axis, and decreases with time. The effect of misalignment, which decreases with creep time, is minimized when creep tests are conducted with long pullrods and large initial strain level (high creep stress)

Water impact shock test system

The basic objective was to design, manufacture, and install a shock test system which, in part, would have the ability to subject test articles weighing up to 1,000 pounds to both half sine and/or full sine pulses having peak levels of up to 50 G's with half sine pulse durations of 100 milliseconds or full sine period duration of 200 milliseconds. The tolerances associated with the aforementioned pulses were +20% and -10% for the peak levels and plus or minus 10% for the pulse durations. The subject shock test system was to be capable of accepting test article sizes of up to 4 feet by 4 feet mounting surface by 4 feet in length