Spectral analysis for nonstationary audio

A new approach for the analysis of nonstationary signals is proposed, with a focus on audio applications. Following earlier contributions, nonstationarity is modeled via stationarity-breaking operators acting on Gaussian stationary random signals. The focus is on time warping and amplitude modulation, and an approximate maximum-likelihood approach based on suitable approximations in the wavelet transform domain is developed. This paper provides theoretical analysis of the approximations, and introduces JEFAS, a corresponding estimation algorithm. The latter is tested and validated on synthetic as well as real audio signal.Comment: IEEE/ACM Transactions on Audio, Speech and Language Processing, Institute of Electrical and Electronics Engineers, In pres

Detection of Spatial and Temporal Interactions in Renal Autoregulation Dynamics

Renal autoregulation stabilizes renal blood flow to protect the glomerular capillaries and maintain glomerular filtration rates through two mechanisms: tubuloglomerular feedback (TGF) and the myogenic response (MR). It is considered that the feedback mechanisms operate independently in each nephron (the functional unit of the kidney) within a kidney, but renal autoregulation dynamics can be coupled between vascular connected nephrons. It has also been shown that the mechanisms are time-varying and interact with each other. Understanding of the significance of such complex behavior has been limited by absence of techniques capable of monitoring renal flow signals among more than 2 or 3 nephrons simultaneously. The purpose of this thesis was to develop approaches to allow the identification and characterization of spatial and temporal properties of renal autoregulation dynamics. We present evidence that laser speckle perfusion imaging (LSPI) effectively captures renal autoregulation dynamics in perfusion signals across the renal cortex of anaesthetized rats and that spatial heterogeneity of the dynamics is present and can be investigated using LSPI. Next, we present a novel approach to segment LSPI of the renal surface into phase synchronized clusters representing areas with coupled renal autoregulation dynamics. Results are shown for the MR and demonstrate that when a signal is present phase synchronized regions can be identified. We then describe an approach to identify quadratic phase coupling between the TGF and MR mechanisms in time and space. Using this approach we can identify locations across the renal surface where both mechanisms are operating cooperatively. Finally, we show how synchronization between nephrons can be investigated in relation to renal autoregulation effectiveness by comparing phase synchronization estimates from LSPI with renal autoregulation system properties estimated from renal blood flow and blood pressure measurements. Overall, we have developed approaches to 1) capture renal autoregulation dynamics across the renal surface, 2) identify regions with phase synchronized renal autoregulation dynamics, 3) quantify the presence of the TGF-MR interaction across the renal surface, and 4) determine how the above vary over time. The described tools allow for investigations of the significance and mechanisms behind the complex spatial interactions and time-varying properties of renal autoregulation dynamics

ENHANCEMENTS TO THE MODIFIED COMPOSITE PATTERN METHOD OF STRUCTURED LIGHT 3D CAPTURE

The use of structured light illumination techniques for three-dimensional data acquisition is, in many cases, limited to stationary subjects due to the multiple pattern projections needed for depth analysis. Traditional Composite Pattern (CP) multiplexing utilizes sinusoidal modulation of individual projection patterns to allow numerous patterns to be combined into a single image. However, due to demodulation artifacts, it is often difficult to accurately recover the subject surface contour information. On the other hand, if one were to project an image consisting of many thin, identical stripes onto the surface, one could, by isolating each stripe center, recreate a very accurate representation of surface contour. But in this case, recovery of depth information via triangulation would be quite difficult. The method described herein, Modified Composite Pattern (MCP), is a conjunction of these two concepts. Combining a traditional Composite Pattern multiplexed projection image with a pattern of thin stripes allows for accurate surface representation combined with non-ambiguous identification of projection pattern elements. In this way, it is possible to recover surface depth characteristics using only a single structured light projection. The technique described utilizes a binary structured light projection sequence (consisting of four unique images) modulated according to Composite Pattern methodology. A stripe pattern overlay is then applied to the pattern. Upon projection and imaging of the subject surface, the stripe pattern is isolated, and the composite pattern information demodulated and recovered, allowing for 3D surface representation. In this research, the MCP technique is considered specifically in the context of a Hidden Markov Process Model. Updated processing methodologies explained herein make use of the Viterbi algorithm for the purpose of optimal analysis of MCP encoded images. Additionally, we techniques are introduced which, when implemented, allow fully automated processing of the Modified Composite Pattern image

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Optimization of DSSS Receivers Using Hardware-in-the-Loop Simulations

Over the years, there has been significant interest in defining a hardware abstraction layer to facilitate code reuse in software defined radio (SDR) applications. Designers are looking for a way to enable application software to specify a waveform, configure the platform, and control digital signal processing (DSP) functions in a hardware platform in a way that insulates it from the details of realization. This thesis presents a tool-based methodolgy for developing and optimizing a Direct Sequence Spread Spectrum (DSSS) transceiver deployed in custom hardware like Field Programmble Gate Arrays (FPGAs). The system model consists of a tranmitter which employs a quadrature phase shift keying (QPSK) modulation scheme, an additive white Gaussian noise (AWGN) channel, and a receiver whose main parts consist of an analog-to-digital converter (ADC), digital down converter (DDC), image rejection low-pass filter (LPF), carrier phase locked loop (PLL), tracking locked loop, down-sampler, spread spectrum correlators, and rectangular-to-polar converter. The design methodology is based on a new programming model for FPGAs developed in the industry by Xilinx Inc. The Xilinx System Generator for DSP software tool provides design portability and streamlines system development by enabling engineers to create and validate a system model in Xilinx FPGAs. By providing hierarchical modeling and automatic HDL code generation for programmable devices, designs can be easily verified through hardware-in-the-loop (HIL) simulations. HIL provides a significant increase in simulation speed which allows optimization of the receiver design with respect to the datapath size for different functional parts of the receiver. The parameterized datapath points used in the simulation are ADC resolution, DDC datapath size, LPF datapath size, correlator height, correlator datapath size, and rectangular-to-polar datapath size. These parameters are changed in the software enviornment and tested for bit error rate (BER) performance through real-time hardware simualtions. The final result presents a system design with minimum harware area occupancy relative to an acceptable BER degradation

Deep Space Telecommunications Systems Engineering

Descriptive and analytical information useful for the optimal design, specification, and performance evaluation of deep space telecommunications systems is presented. Telemetry, tracking, and command systems, receiver design, spacecraft antennas, frequency selection, interference, and modulation techniques are addressed