Telecommunication Systems

This book is based on both industrial and academic research efforts in which a number of recent advancements and rare insights into telecommunication systems are well presented. The volume is organized into four parts: "Telecommunication Protocol, Optimization, and Security Frameworks", "Next-Generation Optical Access Technologies", "Convergence of Wireless-Optical Networks" and "Advanced Relay and Antenna Systems for Smart Networks." Chapters within these parts are self-contained and cross-referenced to facilitate further study

Investigation of performance issues affecting optical circuit and packet switched WDM networks

Optical switching represents the next step in the evolution of optical networks. This thesis describes work that was carried out to examine performance issues which can occur in two distinct varieties of optical switching networks. Slow optical switching in which lightpaths are requested, provisioned and torn down when no longer required is known as optical circuit switching (OCS). Services enabled by OCS include wavelength routing, dynamic bandwidth allocation and protection switching. With network elements such as reconfigurable optical add/drop multiplexers (ROADMs) and optical cross connects (OXCs) now being deployed along with the generalized multiprotocol label switching (GMPLS) control plane this represents the current state of the art in commercial networks. These networks often employ erbium doped fiber amplifiers (EDFAs) to boost the optical signal to noise ratio of the WDM channels and as channel configurations change, wavelength dependent gain variations in the EDFAs can lead to channel power divergence that can result in significant performance degradation. This issue is examined in detail using a reconfigurable wavelength division multiplexed (WDM) network testbed and results show the severe impact that channel reconfiguration can have on transmission performance. Following the slow switching work the focus shifts to one of the key enabling technologies for fast optical switching, namely the tunable laser. Tunable lasers which can switch on the nanosecond timescale will be required in the transmitters and wavelength converters of optical packet switching networks. The switching times and frequency drifts, both of commercially available lasers, and of novel devices are investigated and performance issues which can arise due to this frequency drift are examined. An optical packet switching transmitter based on a novel label switching technique and employing one of the fast tunable lasers is designed and employed in a dual channel WDM packet switching system. In depth performance evaluations of this labelling scheme and packet switching system show the detrimental impact that wavelength drift can have on such systems

Topology overlays for dedicated protection Ethernet LAN services in advanced SONET/SDH networks

The explosion of information technology (IT) services coupled with much-increased personal and scientific computing capabilities has resulted in great demand for more scalable and reliable networking services. Along these lines, carriers have spent large sums to transition their legacy\u27 SONET/SDH voice-based networking infrastructures to better support client-side Ethernet data interfaces, i.e., next-generation SONET/SDH (NGS). In particular, a key addition here has been the new virtual concatenation (VCAT) feature which supports inverse multiplexing to \u27split\u27 larger connection requests in to a series of independently-routed \u27sub-connections\u27. As these improved infrastructures have been deployed, the design of new Ethernet over SONET/SDH (EoS) services has become a key focus area for carriers, i.e., including point-to-point and multi-point services. In light of the above, this thesis focuses on the study of improved multi-point EoS schemes in NGS networks, i.e., to provision robust \u27virtual LAN\u27 capabilities over metro and wide-area domains. Indeed, as services demands grow, survivability considerations are becoming a key concern. Along these lines, the proposed solution develops novel multi-tiered (partial) protection strategies. Specifically, graph-theoretic algorithms are first proposed to interconnect multi-point node groups using bus and minimum spanning tree (MST) overlays. Next, advanced multi-path routing schemes are used to provision and protect these individual overlay connections using the inverse-multiplexing capabilities of NGS. Finally, post-fault restoration features are also added to handle expanded failure conditions, e.g., multiple failures. The performances of the proposed multi-point EoS algorithms developed in this research are gauged using advanced software-based simulation in the OPNET ModelerTM environment. The findings indicate that both the bus and MST overlays give very good performance in terms of request blocking and carried load. However, the MST-based overlays slightly outperform the bus-based overlays as they allow more efficient topology designs. In addition, the incorporation of dynamic load state information in the selection of bus and/or MST overlays is also very beneficial as opposed to just using static hop count state. Furthermore, inverse-multiplexing is highly-effective, yielding notably higher carried loads when coupled with load-balancing sub-connection routing. Finally, results also show that post-fault restoration is also a very effective means of boosting EoS LAN throughputs for partially-protected demands, consistently matching the reliability of full-protection setups.\u2

Hardware-Software Integrated Silicon Photonic Systems

Fabrication of integrated photonic devices and circuits in a CMOS-compatible process or foundry is the essence of the silicon photonic platform. Optical devices in this platform are enabled by the high index contrast between silicon and silicon on insulator. These devices offer potential benefits when integrated with existing and emerging high performance microelectronics. Integration of silicon photonics with small footprints and power-efficient and high-bandwidth operation has long been cited as a solution to existing issues in high performance interconnects for telecommunications and data communication. Stemming from this historic application in communications, new applications in sensing arrays, biochemistry, and even entertainment continue to grow. However, for many technologies to successfully adopt silicon photonics and reap the perceived benefits, the silicon photonic platform must extend toward development of a full ecosystem. Such extension includes implementation of low cost and robust electronic-photonic packaging techniques for all applications. In an ecosystem implemented with services ranging from device fabrication all the way to packaged products, ease-of-use and ease-of-deployment in systems that require many hardware and software components becomes possible. With the onset of the Internet of Things (IoT), nearly all technologies—sensors, compute, communication devices, etc.—persist in systems with some level of localized or distributed software interaction. These interactions often require a level of networked communications. For silicon photonics to penetrate technologies comprising IoT, it is advantageous to implement such devices in a hardware-software integrated way. Meaning, all functionalities and interactions related to the silicon photonic devices are well defined in terms of the physicality of the hardware. This hardware is then abstracted into various levels of software as needed in the system. The power of hardware-software integration allows many of the piece-wise demonstrated functionalities of silicon photonics to easily translate to commercial implementation. This work begins by briefly highlighting the challenges and solutions for transforming existing silicon photonic platforms to a full-fledged silicon photonic ecosystem. The highlighted solutions in development consist of tools for fabrication, testing, subsystem packaging, and system validation. Building off the knowledge of a silicon photonic ecosystem in development, this work continues by demonstrating various levels of hardware-software integration. These are primarily focused on silicon photonic interconnects. The first hardware-software integration-focused portion of this work explores silicon microring-based devices as a key building block for greater silicon photonic subsystems. The microring’s sensitivity to thermal fluctuations is identified not as a flaw, but as a tool for functionalization. A logical control system is implemented to mitigate thermal effects that would normally render a microring resonator inoperable. The mechanism to control the microring is extended and abstracted with software programmability to offer wavelength routing as a network primitive. This functionality, available through hardware-software integration, offers the possibility for ubiquitous deployment of such microring devices in future photonic interconnection networks. The second hardware-software integration-focused portion of this work explores dynamic silicon photonic switching devices and circuits. Specifically, interactions with and implications of high-speed data propagation and link layer control are demonstrated. The characteristics of photonic link setup include transients due to physical layer optical effects, latencies involved with initializing burst mode links, and optical link quality. The impacts on the functionalities and performance offered by photonic devices are explored. An optical network interface platform is devised using FPGAs to encapsulate hardware and software for controlling these characteristics using custom hardware description language, firmware, and software. A basic version of a silicon photonic network controller using FPGAs is used as a tool to demonstrate a highly scalable switch architecture using microring resonators. This architecture would not be possible without some semblance of this controller, combined with advanced electronic-photonic packaging. A more advanced deployment of the network interface platform is used to demonstrate a method for accelerating photonic links using out-of-band arbitration. A first demonstration of this platform is performed on a silicon photonic microring router network. A second demonstration is used to further explore the feasibility of full hardware-software integrated photonic device actuation, link layer control, and out-of-band arbitration. The demonstration is performed on a complete silicon photonic network with both spatial switching and wavelength routing functionalities. The aforementioned hardware-software integration mechanisms are rigorously tested for data communications applications. Capabilities are shown for very reliable, low latency, and dynamic high-speed data delivery using silicon photonic devices. Applying these mechanisms to complete electronic-photonic packaged subsystems provides a strong path to commercial manifestations of functional silicon photonic devices

Towards all-optical label switching nodes with multicast

Fiber optics has developed so rapidly during the last decades that it has be- come the backbone of our communication systems. Evolved from initially static single-channel point-to-point links, the current advanced optical backbone net- work consists mostly of wavelength-division multiplexed (WDM) networks with optical add/drop multiplexing nodes and optical cross-connects that can switch data in the optical domain. However, the commercially implemented optical net- work nodes are still performing optical circuit switching using wavelength routing. The dedicated use of wavelength and infrequent recon¯guration result in relatively poor bandwidth utilization. The success of electronic packet switching has inspired researchers to improve the °exibility, e±ciency, granularity and network utiliza- tion of optical networks by introducing optical packet switching using short, local optical labels for forwarding decision making at intermediate optical core network nodes, a technique that is referred to as optical label switching (OLS). Various research demonstrations on OLS systems have been reported with transparent optical packet payload forwarding based on electronic packet label processing, taking advantage of the mature technologies of electronic logical cir- cuitry. This approach requires optic-electronic-optic (OEO) conversion of the op- tical labels, a costly and power consuming procedure particularly for high-speed labels. As optical packet payload bit rate increases from gigabit per second (Gb/s) to terabit per second (Tb/s) or higher, the increased speed of the optical labels will eventually face the electronic bottleneck, so that the OEO conversion and the electronic label processing will be no longer e±cient. OLS with label processing in the optical domain, namely, all-optical label switching (AOLS), will become necessary. Di®erent AOLS techniques have been proposed in the last ¯ve years. In this thesis, AOLS node architectures based on optical time-serial label processing are presented for WDM optical packets. The unicast node architecture, where each optical packet is to be sent to only one output port of the node, has been in- vestigated and partially demonstrated in the EU IST-LASAGNE project. This thesis contributes to the multicast aspects of the AOLS nodes, where the optical packets can be forwarded to multiple or all output ports of a node. Multicast capable AOLS nodes are becoming increasingly interesting due to the exponen- tial growth of the emerging multicast Internet and modern data services such as video streaming, high de¯nition TV, multi-party online games, and enterprise ap- plications such as video conferencing and optical storage area networks. Current electronic routers implement multicast in the Internet protocol (IP) layer, which requires not only the OEO conversion of the optical packets, but also exhaus- tive routing table lookup of the globally unique IP addresses. Despite that, there has been no extensive studies on AOLS multicast nodes, technologies and tra±c performance, apart from a few proof-of-principle experimental demonstrations. In this thesis, three aspects of the multicast capable AOLS nodes are addressed: 1. Logical design of the AOLS multicast node architectures, as well as func- tional subsystems and interconnections, based on state-of-the-art literature research of the ¯eld and the subject. 2. Computer simulations of the tra±c performance of di®erent AOLS unicast and multicast node architectures, using a custom-developed AOLS simulator AOLSim. 3. Experimental demonstrations in laboratory and computer simulations using the commercially available simulator VPItransmissionMakerTM, to evaluate the physical layer performance of the required all-optical multicast technolo- gies. A few selected multi-wavelength conversion (MWC) techniques are particularly looked into. MWC is an essential subsystem of the AOLS node for realizing optical packet multicast by making multiple copies of the optical packet all-optically onto di®er- ent wavelengths channels. In this thesis, theMWC techniques based on cross-phase modulation and four-wave mixing are extensively investigated. The former tech- nique o®ers more wavelength °exibility and good conversion e±ciency, but it is only applicable to intensity modulated signals. The latter technique, on the other hand, o®ers strict transparency in data rate and modulation format, but its work- ing wavelengths are limited by the device or component used, and the conversion e±ciency is considerably lower. The proposals and results presented in this thesis show feasibility of all-optical packet switching and multicasting at line speed without any OEO conversion and electronic processing. The scalability and the costly optical components of the AOLS nodes have been so far two of the major obstacles for commercialization of the AOLS concept. This thesis also introduced a novel, scalable optical labeling concept and a label processing scheme for the AOLS multicast nodes. The pro- posed scheme makes use of the spatial positions of each label bit instead of the total absolute value of all the label bits. Thus for an n-bit label, the complexity of the label processor is determined by n instead of 2n

An Innovative RAN Architecture for Emerging Heterogeneous Networks: The Road to the 5G Era

The global demand for mobile-broadband data services has experienced phenomenal growth over the last few years, driven by the rapid proliferation of smart devices such as smartphones and tablets. This growth is expected to continue unabated as mobile data traffic is predicted to grow anywhere from 20 to 50 times over the next 5 years. Exacerbating the problem is that such unprecedented surge in smartphones usage, which is characterized by frequent short on/off connections and mobility, generates heavy signaling traffic load in the network signaling storms . This consumes a disproportion amount of network resources, compromising network throughput and efficiency, and in extreme cases can cause the Third-Generation (3G) or 4G (long-term evolution (LTE) and LTE-Advanced (LTE-A)) cellular networks to crash. As the conventional approaches of improving the spectral efficiency and/or allocation additional spectrum are fast approaching their theoretical limits, there is a growing consensus that current 3G and 4G (LTE/LTE-A) cellular radio access technologies (RATs) won\u27t be able to meet the anticipated growth in mobile traffic demand. To address these challenges, the wireless industry and standardization bodies have initiated a roadmap for transition from 4G to 5G cellular technology with a key objective to increase capacity by 1000Ã? by 2020 . Even though the technology hasn\u27t been invented yet, the hype around 5G networks has begun to bubble. The emerging consensus is that 5G is not a single technology, but rather a synergistic collection of interworking technical innovations and solutions that collectively address the challenge of traffic growth. The core emerging ingredients that are widely considered the key enabling technologies to realize the envisioned 5G era, listed in the order of importance, are: 1) Heterogeneous networks (HetNets); 2) flexible backhauling; 3) efficient traffic offload techniques; and 4) Self Organizing Networks (SONs). The anticipated solutions delivered by efficient interworking/ integration of these enabling technologies are not simply about throwing more resources and /or spectrum at the challenge. The envisioned solution, however, requires radically different cellular RAN and mobile core architectures that efficiently and cost-effectively deploy and manage radio resources as well as offload mobile traffic from the overloaded core network. The main objective of this thesis is to address the key techno-economics challenges facing the transition from current Fourth-Generation (4G) cellular technology to the 5G era in the context of proposing a novel high-risk revolutionary direction to the design and implementation of the envisioned 5G cellular networks. The ultimate goal is to explore the potential and viability of cost-effectively implementing the 1000x capacity challenge while continuing to provide adequate mobile broadband experience to users. Specifically, this work proposes and devises a novel PON-based HetNet mobile backhaul RAN architecture that: 1) holistically addresses the key techno-economics hurdles facing the implementation of the envisioned 5G cellular technology, specifically, the backhauling and signaling challenges; and 2) enables, for the first time to the best of our knowledge, the support of efficient ground-breaking mobile data and signaling offload techniques, which significantly enhance the performance of both the HetNet-based RAN and LTE-A\u27s core network (Evolved Packet Core (EPC) per 3GPP standard), ensure that core network equipment is used more productively, and moderate the evolving 5G\u27s signaling growth and optimize its impact. To address the backhauling challenge, we propose a cost-effective fiber-based small cell backhaul infrastructure, which leverages existing fibered and powered facilities associated with a PON-based fiber-to-the-Node/Home (FTTN/FTTH)) residential access network. Due to the sharing of existing valuable fiber assets, the proposed PON-based backhaul architecture, in which the small cells are collocated with existing FTTN remote terminals (optical network units (ONUs)), is much more economical than conventional point-to-point (PTP) fiber backhaul designs. A fully distributed ring-based EPON architecture is utilized here as the fiber-based HetNet backhaul. The techno-economics merits of utilizing the proposed PON-based FTTx access HetNet RAN architecture versus that of traditional 4G LTE-A\u27s RAN will be thoroughly examined and quantified. Specifically, we quantify the techno-economics merits of the proposed PON-based HetNet backhaul by comparing its performance versus that of a conventional fiber-based PTP backhaul architecture as a benchmark. It is shown that the purposely selected ring-based PON architecture along with the supporting distributed control plane enable the proposed PON-based FTTx RAN architecture to support several key salient networking features that collectively significantly enhance the overall performance of both the HetNet-based RAN and 4G LTE-A\u27s core (EPC) compared to that of the typical fiber-based PTP backhaul architecture in terms of handoff capability, signaling overhead, overall network throughput and latency, and QoS support. It will also been shown that the proposed HetNet-based RAN architecture is not only capable of providing the typical macro-cell offloading gain (RAN gain) but also can provide ground-breaking EPC offloading gain. The simulation results indicate that the overall capacity of the proposed HetNet scales with the number of deployed small cells, thanks to LTE-A\u27s advanced interference management techniques. For example, if there are 10 deployed outdoor small cells for every macrocell in the network, then the overall capacity will be approximately 10-11x capacity gain over a macro-only network. To reach the 1000x capacity goal, numerous small cells including 3G, 4G, and WiFi (femtos, picos, metros, relays, remote radio heads, distributed antenna systems) need to be deployed indoors and outdoors, at all possible venues (residences and enterprises)