1,317 research outputs found
Survey of Spectrum Sharing for Inter-Technology Coexistence
Increasing capacity demands in emerging wireless technologies are expected to
be met by network densification and spectrum bands open to multiple
technologies. These will, in turn, increase the level of interference and also
result in more complex inter-technology interactions, which will need to be
managed through spectrum sharing mechanisms. Consequently, novel spectrum
sharing mechanisms should be designed to allow spectrum access for multiple
technologies, while efficiently utilizing the spectrum resources overall.
Importantly, it is not trivial to design such efficient mechanisms, not only
due to technical aspects, but also due to regulatory and business model
constraints. In this survey we address spectrum sharing mechanisms for wireless
inter-technology coexistence by means of a technology circle that incorporates
in a unified, system-level view the technical and non-technical aspects. We
thus systematically explore the spectrum sharing design space consisting of
parameters at different layers. Using this framework, we present a literature
review on inter-technology coexistence with a focus on wireless technologies
with equal spectrum access rights, i.e. (i) primary/primary, (ii)
secondary/secondary, and (iii) technologies operating in a spectrum commons.
Moreover, we reflect on our literature review to identify possible spectrum
sharing design solutions and performance evaluation approaches useful for
future coexistence cases. Finally, we discuss spectrum sharing design
challenges and suggest future research directions
An Energy Aware and Secure MAC Protocol for Tackling Denial of Sleep Attacks in Wireless Sensor Networks
Wireless sensor networks which form part of the core for the Internet of Things consist of resource constrained sensors that are usually powered by batteries. Therefore, careful
energy awareness is essential when working with these devices.
Indeed,the introduction of security techniques such as authentication and encryption, to ensure confidentiality and integrity of data, can place higher energy load on the sensors. However, the absence of security protection c ould give room for energy drain attacks such as denial of sleep attacks which have a higher negative impact on the life span ( of the sensors than the presence of security features.
This thesis, therefore, focuses on tackling denial of sleep attacks from two perspectives A security perspective and an energy efficiency perspective. The security perspective involves evaluating and ranking a number of security based techniques to curbing denial of sleep attacks. The energy efficiency perspective, on the other hand, involves exploring duty cycling and simulating three Media Access Control ( protocols Sensor MAC, Timeout MAC andTunableMAC under different network sizes and measuring different parameters such as the Received Signal Strength RSSI) and Link Quality Indicator ( Transmit power, throughput and energy efficiency Duty cycling happens to be one of the major techniques for conserving energy in wireless sensor networks and this research aims to answer questions with regards to the effect of duty cycles on the energy efficiency as well as the throughput of three duty cycle protocols Sensor MAC ( Timeout MAC ( and TunableMAC in addition to creating a novel MAC protocol that is also more resilient to denial of sleep a ttacks than existing protocols.
The main contributions to knowledge from this thesis are the developed framework used for evaluation of existing denial of sleep attack solutions and the algorithms which fuel the other contribution to knowledge a newly developed protocol tested on the Castalia Simulator on the OMNET++ platform. The new protocol has been compared with existing protocols and
has been found to have significant improvement in energy efficiency and also better resilience to denial of sleep at tacks Part of this research has been published Two conference
publications in IEEE Explore and one workshop paper
Droplet: A New Denial-of-Service Attack on Low Power Wireless Sensor Networks
In this paper we present a new kind of Denial-of-Service attack against the PHY layer of low power wireless sensor networks. Overcoming the very limited range of jamming-based attacks, this attack can penetrate deep into a target network with high power efficiency. We term this the Droplet attack, as it attains enormous disruption by dropping small, payload-less frame headers to its victim's radio receiver, depriving the latter of bandwidth and sleep time. We demonstrate the Droplet attack's high damage rate to full duty-cycle receivers, and further show that a high frequency version of Droplet can even force nodes running on very low duty-cycle MAC protocols to drop most of their packets
A short review on sleep scheduling mechanism in wireless sensor networks
Sleep scheduling, also known as duty cycling, which turn-
s sensor nodes on and off in the necessary time, is a common train of
thought to save energy. Sleep scheduling has become a significant mech-
anism to prolong the lifetime of WSNs and many related methods have
been proposed in recent years, which have diverse emphases and appli-
cation areas. This paper classifies those methods in different taxonomies
and provides a deep insight into them
A survey on energy efficient techniques in wireless sensor networks
International audienceThe myriad of potential applications supported by wireless sensor networks (WSNs) has generated much interest from the research community. Various applications range from small size low industrial monitoring to large scale energy constrained environmental monitoring. In all cases, an operational network is required to fulfill the application missions. In addition, energy consumption of nodes is a great challenge in order to maximize network lifetime. Unlike other networks, it can be hazardous, very expensive or even impossible to charge or replace exhausted batteries due to the hostile nature of environment. Researchers are invited to design energy efficient protocols while achieving the desired network operations. This paper focuses on different techniques to reduce the consumption of the limited energy budget of sensor nodes. After having identified the reasons of energy waste in WSNs, we classify energy efficient techniques into five classes, namely data reduction, control reduction, energy efficient routing, duty cycling and topology control. We then detail each of them, presenting subdivisions and giving many examples. We conclude by a recapitulative table
Atomic-SDN: Is Synchronous Flooding the Solution to Software-Defined Networking in IoT?
The adoption of Software Defined Networking (SDN) within traditional networks
has provided operators the ability to manage diverse resources and easily
reconfigure networks as requirements change. Recent research has extended this
concept to IEEE 802.15.4 low-power wireless networks, which form a key
component of the Internet of Things (IoT). However, the multiple traffic
patterns necessary for SDN control makes it difficult to apply this approach to
these highly challenging environments. This paper presents Atomic-SDN, a highly
reliable and low-latency solution for SDN in low-power wireless. Atomic-SDN
introduces a novel Synchronous Flooding (SF) architecture capable of
dynamically configuring SF protocols to satisfy complex SDN control
requirements, and draws from the authors' previous experiences in the IEEE EWSN
Dependability Competition: where SF solutions have consistently outperformed
other entries. Using this approach, Atomic-SDN presents considerable
performance gains over other SDN implementations for low-power IoT networks. We
evaluate Atomic-SDN through simulation and experimentation, and show how
utilizing SF techniques provides latency and reliability guarantees to SDN
control operations as the local mesh scales. We compare Atomic-SDN against
other SDN implementations based on the IEEE 802.15.4 network stack, and
establish that Atomic-SDN improves SDN control by orders-of-magnitude across
latency, reliability, and energy-efficiency metrics
Evolving SDN for Low-Power IoT Networks
Software Defined Networking (SDN) offers a flexible and scalable architecture
that abstracts decision making away from individual devices and provides a
programmable network platform. However, implementing a centralized SDN
architecture within the constraints of a low-power wireless network faces
considerable challenges. Not only is controller traffic subject to jitter due
to unreliable links and network contention, but the overhead generated by SDN
can severely affect the performance of other traffic. This paper addresses the
challenge of bringing high-overhead SDN architecture to IEEE 802.15.4 networks.
We explore how traditional SDN needs to evolve in order to overcome the
constraints of low-power wireless networks, and discuss protocol and
architectural optimizations necessary to reduce SDN control overhead - the main
barrier to successful implementation. We argue that interoperability with the
existing protocol stack is necessary to provide a platform for controller
discovery and coexistence with legacy networks. We consequently introduce
{\mu}SDN, a lightweight SDN framework for Contiki, with both IPv6 and
underlying routing protocol interoperability, as well as optimizing a number of
elements within the SDN architecture to reduce control overhead to practical
levels. We evaluate {\mu}SDN in terms of latency, energy, and packet delivery.
Through this evaluation we show how the cost of SDN control overhead (both
bootstrapping and management) can be reduced to a point where comparable
performance and scalability is achieved against an IEEE 802.15.4-2012 RPL-based
network. Additionally, we demonstrate {\mu}SDN through simulation: providing a
use-case where the SDN configurability can be used to provide Quality of
Service (QoS) for critical network flows experiencing interference, and we
achieve considerable reductions in delay and jitter in comparison to a scenario
without SDN
MAC protocols with wake-up radio for wireless sensor networks: A review
The use of a low-power wake-up radio in wireless sensor networks is considered in this paper, where relevant medium access control solutions are studied. A variety of asynchronous wake-up MAC protocols have been proposed in the literature, which take advantage of integrating a second radio to the main one for waking it up. However, a complete and a comprehensive survey particularly on these protocols is missing in the literature. This paper aims at filling this gap, proposing a relevant taxonomy, and providing deep analysis and discussions. From both perspectives of energy efficiency and latency reduction, as well as their operation principles, state-of-the-art wake-up MAC protocols are grouped into three main categories: (1) duty cycled wake-up MAC protocols; (2) non-cycled wake-up protocols; and (3) path reservation wake-up protocols. The first category includes two subcategories: (1) static wake-up protocols versus (2) traffic adaptive wake-up protocols. Non-cycled wake-up MAC protocols are again divided into two classes: (1) always-on wake-up protocol and (2) radio-triggered wake-up protocols. The latter is in turn split into two subclasses: (1) passive wake-up MAC protocols versus (2) ultra low power active wake-up MAC protocols. Two schemes could be identified for the last category, (1) broadcast based wake-up versus (2) addressing based wake-up. All these classes are discussed and analyzed in this paper, and canonical protocols are investigated following the proposed taxonomy
- …