Surface Wave Multipath Signals in Near-Field Microwave Imaging

Microwave imaging techniques are prone to signal corruption from unwanted multipath signals. Near-field systems are especially vulnerable because signals can scatter and reflect from structural objects within or on the boundary of the imaging zone. These issues are further exacerbated when surface waves are generated with the potential of propagating along the transmitting and receiving antenna feed lines and other low-loss paths. In this paper, we analyze the contributions of multi-path signals arising from surface wave effects. Specifically, experiments were conducted with a near-field microwave imaging array positioned at variable heights from the floor of a coupling fluid tank. Antenna arrays with different feed line lengths in the fluid were also evaluated. The results show that surface waves corrupt the received signals over the longest transmission distances across the measurement array. However, the surface wave effects can be eliminated provided the feed line lengths are sufficiently long independently of the distance of the transmitting/receiving antenna tips from the imaging tank floor. Theoretical predictions confirm the experimental observations

Microwave Antenna System for Muscle Rupture Imaging with a Lossy Gel to Reduce Multipath Interference

Injuries to the hamstring muscles are an increasing problem in sports. Imaging plays a key role in diagnosing and managing athletes with muscle injuries, but there are several problems with conventional imaging modalities with respect to cost and availability. We hypothesized that microwave imaging could provide improved availability and lower costs and lead to improved and more accurate diagnostics. In this paper, a semicircular microwave imaging array with eight antennae was investigated. A key component in this system is the novel antenna design, which is based on a monopole antenna and a lossy gel. The purpose of the gel is to reduce the effects of multipath signals and improve the imaging quality. Several different gels have been manufactured and evaluated in imaging experiments. For comparison, corresponding simulations were performed. The results showed that the gels can effectively reduce the multipath signals and the imaging experiments resulted in significantly more stable and repeatable reconstructions when a lossy gel was used compared to when an almost non-lossy gel was used

FMCW Signals for Radar Imaging and Channel Sounding

A linear / stepped frequency modulated continuous wave (FMCW) signal has for a long time been used in radar and channel sounding. A novel FMCW waveform known as “Gated FMCW” signal is proposed in this thesis for the suppression of strong undesired signals in microwave radar applications, such as: through-the-wall, ground penetrating, and medical imaging radar. In these applications the crosstalk signal between antennas and the reflections form the early interface (wall, ground surface, or skin respectively) are much stronger in magnitude compared to the backscattered signal from the target. Consequently, if not suppressed they overshadow the target’s return making detection a difficult task. Moreover, these strong unwanted reflections limit the radar’s dynamic range and might saturate or block the receiver causing the reflection from actual targets (especially targets with low radar cross section) to appear as noise. The effectiveness of the proposed waveform as a suppression technique was investigated in various radar scenarios, through numerical simulations and experiments. Comparisons of the radar images obtained for the radar system operating with the standard linear FMCW signal and with the proposed Gated FMCW waveform are also made. In addition to the radar work the application of FMCW signals to radio propagation measurements and channel characterisation in the 60 GHz and 2-6 GHz frequency bands in indoor and outdoor environments is described. The data are used to predict the bit error rate performance of the in-house built measurement based channel simulator and the results are compared with the theoretical multipath channel simulator available in Matlab

Through-the-Wall Imaging and Multipath Exploitation

We consider the problem of using electromagnetic sensing to estimate targets in complex environments, such as when they are hidden behind walls and other opaque objects. The often unknown electromagnetic interactions between the target and the surrounding area, make the problem challenging. To improve our results, we exploit information in the multipath of the objects surrounding both the target and the sensors. First, we estimate building layouts by using the jump-diffusion algorithm and employing prior knowledge about typical building layouts. We also take advantage of a detailed physical model that captures the scattering by the inner walls and efficiently utilizes the frequency bandwidth. We then localize targets hidden behind reinforced concrete walls. The sensing signals reflected from the targets are significantly distorted and attenuated by the embedded metal bars. Using the surface formulation of the method of moments, we model the response of the reinforced walls, and incorporate their transmission coefficients into the beamforming method to achieve better estimation accuracy. In a related effort, we utilize the sparsity constraint to improve electromagnetic imaging of hidden conducting targets, assuming that a set of equivalent sources can be substituted for the targets. We derive a linear measurement model and employ l1 regularization to identify the equivalent sources in the vicinity of the target surfaces. The proposed inverse method reconstructs the target shape in one or two steps, using single-frequency data. Our results are experimentally verified. Finally, we exploit the multipath from sensor-array platforms to facilitate direction finding. This in contrast to the usual approach, which utilizes the scattering close to the targets. We analyze the effect of the multipath in a statistical signal processing framework, and compute the Cramer-Rao bound to obtain the system resolution. We conduct experiments on a simple array platform to support our theoretical approach

2009 Index IEEE Antennas and Wireless Propagation Letters Vol. 8

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

2008 Index IEEE Transactions on Control Systems Technology Vol. 16

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

THZ RF measurement techniques

Abstract. In this thesis, literature review on available methods, techniques and procedures for terahertz antenna measurement system and terahertz propagation measurement system are reported. The paper presented the terahertz frequency spectrum allocation by FCC, ITU, ETSI and its application in wireless communication system with advantage in obtaining terabits per second data rates. Terahertz antenna parameters are reported and measurement systems for measurement of these chapters are reviewed. Literature of three papers on terahertz antenna measurement system with their respective measurement setup, calibration techniques and measurement procedures are reviewed. An automated antenna measurement system is reviewed with stochastic and systematic measurements and has achieved terahertz antenna s-parameter measurements in far field region at frequency range of 220 GHz to 330 GHz. Another measurement system with single port short-open-load (SOL) calibration technique is reviewed. In this measurement of s-parameter of terahertz antenna is carried out, using receiver horn placed on 3 D positioner, which records the AUT 3D radiation pattern. The third paper reviewed, is a reconfigurable terahertz antenna measurement system, with capabilities of working on large bandwidths, with small change in work bench instrumentation. This setup contains the multiplexing stages for terahertz frequency generation. Beam pattern measurements are conducted at 1.37 THz supporting the simulations and the system stability for reconfigurations. In the later study, terahertz propagation parameters are studied and presented for review of available terahertz propagation measurement systems. Literature review of three papers describing different setup and procedures for terahertz propagation measurement system are reported. The first system with the setup to record path loss in LOS and NLOS links at 260 GHz to 400 GHz is presented. Propagation parameters containing reflections, shadowing is measured. LOS and NLOS channel capacity models are obtained based on data rates in terabits per second for using above 5G wireless communication systems. Another system with office architecture, indoor LOS link, viable for indoor wireless communication applications is reported. Propagation parameters containing power density profile (PDP) are measured and validated for 140 GHz to 220 GHz. A measurement system which reports effect of atmospheric pressure, temperature and humidity is reported in the last. The setup used short, offset-short, load and thru (SOLT) technique for calibration and PDP propagation parameter is measured for 0.5 THz to 0.75 THz. Terahertz antenna and wave propagation measurement system reviewed in the papers are vital for development of terahertz systems in wireless and mobile communication. Further the study can be extended for measurement of terahertz antennas and wave propagation parameters with models of use in wireless hand-held devices, connected devices, mobile backhaul system and more

Towards Microwave Detection of Thromboses

Stroke is estimated to be the second most common cause of death with hugeburdens and costs for the patient and society. Since the treatment given to a stroke patient depends on the type of stroke they have, a fast and reliable diagnosis of the stroke type is needed before any treatment can be started. In general, the treatment is more effective the sooner it is started. Thrombectomy is an interventional treatment for patients with an occlusion (thrombosis) in a large artery that is only performed in a limited number of hospitals, thus early detection can support the pre-hospital decision-making process and help decreasing the time to treatment start. The aim of this work is to investigate and develop a method for pre-hospital diagnosis of ischemic stroke by using a microwave diagnosis setup and Contrast-Enhancement Agent (CEA). We propose to exploit the asymmetry created in the brain as a result of partial or full blockage of the arteries due to thromboses. This asymmetry is enhanced with the use of CEA and can be captured by the EM waves transmitted and received by the antennas on the head.The microwave diagnosis setup consists of several antennas placed on thebody. The multipath interference caused by the waves traveling on the surfaceof the body is a factor that limits the detection accuracy of this system. In the present study, a Dielectric Rod Antenna (DRA) is designed to address this challenge with a Self Grounded Bow-Tie Antenna (SGBTA) as the wave exciter. It was shown that DRA can reduce the surface wave power up to 10 dB in comparison with that of SGBTA while increasing its bandwidth by 72%.Preliminary results obtained from measurements on sheep are promising

Orbital Angular Momentum Waves: Generation, Detection and Emerging Applications

Orbital angular momentum (OAM) has aroused a widespread interest in many fields, especially in telecommunications due to its potential for unleashing new capacity in the severely congested spectrum of commercial communication systems. Beams carrying OAM have a helical phase front and a field strength with a singularity along the axial center, which can be used for information transmission, imaging and particle manipulation. The number of orthogonal OAM modes in a single beam is theoretically infinite and each mode is an element of a complete orthogonal basis that can be employed for multiplexing different signals, thus greatly improving the spectrum efficiency. In this paper, we comprehensively summarize and compare the methods for generation and detection of optical OAM, radio OAM and acoustic OAM. Then, we represent the applications and technical challenges of OAM in communications, including free-space optical communications, optical fiber communications, radio communications and acoustic communications. To complete our survey, we also discuss the state of art of particle manipulation and target imaging with OAM beams