A Preliminary Study of Machine-Learning-Based Ranging with LTE Channel Impulse Response in Multipath Environment

Alternative navigation technology to global navigation satellite systems (GNSSs) is required for unmanned ground vehicles (UGVs) in multipath environments (such as urban areas). In urban areas, long-term evolution (LTE) signals can be received ubiquitously at high power without any additional infrastructure. We present a machine learning approach to estimate the range between the LTE base station and UGV based on the LTE channel impulse response (CIR). The CIR, which includes information of signal attenuation from the channel, was extracted from the LTE physical layer using a software-defined radio (SDR). We designed a convolutional neural network (CNN) that estimates ranges with the CIR as input. The proposed method demonstrated better ranging performance than a received signal strength indicator (RSSI)-based method during our field test.Comment: Submitted to IEEE/IEIE ICCE-Asia 202

Infrastructure Wi-Fi for connected autonomous vehicle positioning : a review of the state-of-the-art

In order to realize intelligent vehicular transport networks and self driving cars, connected autonomous vehicles (CAVs) are required to be able to estimate their position to the nearest centimeter. Traditional positioning in CAVs is realized by using a global navigation satellite system (GNSS) such as global positioning system (GPS) or by fusing weighted location parameters from a GNSS with an inertial navigation systems (INSs). In urban environments where Wi-Fi coverage is ubiquitous and GNSS signals experience signal blockage, multipath or non line-of-sight (NLOS) propagation, enterprise or carrier-grade Wi-Fi networks can be opportunistically used for localization or “fused” with GNSS to improve the localization accuracy and precision. While GNSS-free localization systems are in the literature, a survey of vehicle localization from the perspective of a Wi-Fi anchor/infrastructure is limited. Consequently, this review seeks to investigate recent technological advances relating to positioning techniques between an ego vehicle and a vehicular network infrastructure. Also discussed in this paper is an analysis of the location accuracy, complexity and applicability of surveyed literature with respect to intelligent transportation system requirements for CAVs. It is envisaged that hybrid vehicular localization systems will enable pervasive localization services for CAVs as they travel through urban canyons, dense foliage or multi-story car parks

Beam Tracking Strategies for 5G New Radio Networks Operating in the Millimetre Wave Bands

[ES] La llegada de la próxima generación del estándar de comunicaciones móviles, la llamada quinta generación (5G), es prácticamente una realidad. Las primeras redes comerciales han comenzado a ser desplegadas, centrándose en ofrecer altas velocidades de transferencia de datos. Sin embargo, el estándar 5G va mucho más allá y prevé dar soporte a nuevos servicios que pretenden revolucionar la sociedad. Estos nuevos servicios imponen un nivel alto de requisitos en no solo en cuanto a velocidad del tráfico de datos, sino en cuanto a latencia o número de dispositivos conectados simultáneamente. La amplia variedad de requisitos no puede ser soportada por las redes de cuarta generación (4G), por lo que se hizo necesario plantear un nuevo paradigma para las redes inalámbricas. Con la promesa de grandes cantidades de ancho de banda sin utilizar, el estándar 5G contempla utilizar frecuencias en la comúnmente conocida como banda de milimétricas (mmWave). Esta banda presenta grandes pérdidas de propagación, que se acentúan si existen bloqueos de señal. Actividades regulatorias del uso de las bandas de milimétricas atrajo el interés tanto de la industria como de la academia en plantear soluciones para dar servicio en estas bandas. En los últimos años se han presentado infinidad de trabajos basados en sistemas con múltiples antenas o MIMO, para conformar las señales transmitidas o recibidas en haces apuntando en determinadas direcciones. La ganancia que aportan los sistemas MIMO pueden compensar las altas pérdidas de propagación, asegurando la viabilidad de las comunicaciones mmWave. Se ha detectado una evidente falta de estudios sobre la viabilidad de sistemas MIMO en entornos móviles y dinámicos con bloqueos que hagan necesario que el sistema se reconfigure. Esta Tesis pretende cubrir este espacio desde un enfoque práctico y propone mecanismos de gestión de los haces para hacerles un seguimiento utilizando los recursos y mecanismos del nuevo estándar 5G. Las soluciones aportadas se basan en el uso eficiente de los reportes de medidas de las señales de referencia estandarizadas en enlace descendente. En primer lugar, esta Tesis recoge un análisis minucioso del estado del arte, donde se corrobora la necesidad de aportar soluciones de seguimiento de haces en sistemas de comunicaciones en la banda de milimétricas. Además, se estudian los diferentes mecanismos definidos en el estándar 5G y que posibilitan el seguimiento. Cabe destacar que el estándar no define un mecanismo único a seguir, permitiendo presentar propuestas. Una vez conocidas las tecnologías, se centra el estudio en el impacto del seguimiento sobre las prestaciones a nivel de red y de enlace. Dicho estudio se realiza sobre un sistema punto a punto, donde el terminal móvil se desplaza por un entorno urbano. En base a simulaciones de red, se cuantifica el índice de seguimiento de haz y de cómo dicho seguimiento afecta a la relación señal a ruido más interferencia (SINR) y la tasa de transmisión del usuario. Las soluciones de seguimiento propuestas en esta Tesis se pueden clasificar en dos categorías. En una primera categoría, se realiza el seguimiento en base a reportes de medidas de las señales de referencia. Independientemente de la velocidad, se alcanza un seguimiento del 91% con poca penalización en la tasa de transmisión si se monitorizan los haces de interés con una periodicidad menor de 20 ms. En la segunda categoría caben mecanismos de seguimiento que hacen uso de fuentes externas de información. Dentro de esta categoría, se propone un fingerprinting que relacione haces con la localización reportada y un modelo de machine learning (ML) que prediga los haces a utilizar. El fingerprinting proporciona los mismos niveles de rendimiento. Sin embargo, esta solución es muy sensible a errores y requiere considerar todos los casos posibles, lo que la hace tecnológicamente inviable. En cambio, el modelo de ML, que hace p[CA] L'arribada de la següent generació de l'estàndard de comunicacions mòbils, l'anomenada cinquena generació (5G), es pràcticament una realitat. Les primeres xarxes comercials han començat a desplegar-se i s'han centrat en oferir altes velocitats de transferència de dades. No obstant, l'estàndard 5G va molt mes allà y preveu donar suport a nous serveis que pretenen revolucionar la societat. Estos nous serveis imposen un alt nivell de requisits no sols en quant a velocitat de tràfic de dades, si no també en quant a latència o número de connexions simultànies. L'ampla varietat de requisits no es suportada per les xarxes de quarta generació (4G) actuals, per el qual es va fer necessari un nou paradigma de xarxes sense fil. Amb la promesa de amplies quantitats d'ample de banda, l'estàndard 5G contempla utilitzar freqüències a la banda de mil·limètriques. Esta banda presenta l'inconvenient d'experimentar grans pèrdues de propagació, que s'accentuen en cas de bloqueigs. L'apertura de les bandes de mil·limètriques va atraure l'interès tant de l'industria com de l'acadèmia en plantejar solucions per a donar servei en estes bandes. En els últims anys s'han presentat infinitat de treballs basats en sistemes amb múltiples antenes o MIMO, per a conformar els senyals transmesos o rebuts en feixos apuntant en determinades direccions d'interès. El guany de feix es pot utilitzar per a compensar les pèrdues de propagació, assegurant la viabilitat de les comunicacions en la banda de mil·limètriques. No obstant això, s'ha detectat una preocupant manca d'estudis sobre la viabilitat d'estos sistemes en entorns mòbils i dinàmics, amb obstacles que bloquejen els feixos i facen necessari que el sistema es reconfigure. El present treball de Tesi pretén cobrir este espai buit i des d'un punt de vista pràctic, es proposen mecanismes de gestió dels feixos per a ser el seguiment utilitzant els recursos i mecanismes dels que disposa l'estàndard 5G. D'esta manera, les solucions aportades es basen en la utilització eficient dels reports de mesures dels senyals de referència del enllaç descendent. En primer lloc, esta Tesi recull una anàlisi minuciosa de l'estat de l'art on es corrobora la necessitat de aportar solucions de seguiment de feixos per a comunicacions en la banda de freqüències mil·limètriques. A més a més, s'estudien els diferents mecanismes definits a l'estàndard 5G i que possibiliten el seguiment. Cap destacar que l'estàndard no defineix un mecanisme únic, si no que deixa la porta oberta a presentar propostes. Una vegada conegudes les tecnologies, l'estudi es centra en l'impacte del seguiment sobre les prestacions a nivell de xarxa i d'enllaç. Este estudi es realitza sobre un sistema MIMO punt a punt, en una única estació base i un terminal mòbil desplaçant-se en un entorn urbà. En base a simulacions d'extrem a extrem, es quantifica l'índex de seguiment de feix i com l'anomenat seguiment afecta a la relació senyal a soroll més interferència (SINR) i a la taxa instantània de transmissió de l'usuari. Les solucions de seguiment de feixos propostes a la Tesi es poden classificar en dos categories. A la primera categoria, el seguiment de feixos es realitza en base als reports de mesures dels senyals de referència. Independentment de la velocitat, s'arriba a una taxa de seguiment del 91% amb poca penalització de taxa de transmissió si els feixos d'interès es mesuren amb una periodicitat menor a 20 ms. A la segona categoria pertanyen els algoritmes que utilitzen fonts d'informació externes. Dins d'aquesta categoria es proposa un fingerprinting que relaciona un parell de feixos amb la ubicació de l'usuari, i a banda un model d'intel·ligència artificial (IA) que preveu el feix a utilitzar. El fingerprinting ofereix el mateix rendiment. Però, esta solució es molt sensible a errors i requereix considerar tots els casos possibles, fent-la tecnològicament inviable. En canvi, el[EN] The arrival of the next generation of mobile communication standards, the so-called Fifth Generation (5G), is already a reality. The first commercial networks have begun to be deployed, and they focus on providing higher data rates. However, the 5G standard goes much further from that and aims at providing support to new services which will revolutionise the society. These new services impose a high level of requirements not only in terms of the data traffic speed, but also in terms of very low latency or incredibly large number of simultaneous connections. This wide variety of requirements cannot be technologically supported by the current Fourth Generation (4G) networks, so it became necessary to move forward with a new paradigm for wireless networks. With the promise of large amounts of bandwidth, in the order of GHz, the 5G standard contemplates the use of frequencies in the commonly known Millimetre Wave (mmWave) band. The mmWave band experiences large propagation losses, which are accentuated in blockage events. Regulatory activities worldwide in the mmWave bands attracted the interest of both the industry and the academia. In the last few years, a tremendous number of contributions on mmWave propagation studies and networks have appeared, most of them based on Multiple-Input Multiple-Output (MIMO) solutions. MIMO architectures allow to beamform, which focuses the radiated energy on certain directions of interest called beams. The additional beam gain compensates the high propagation losses, ensuring the viability of the communications in the mmWave band. There is an evident lack of viability studies of mmWave MIMO systems in mobile and highly-dynamic environments, where obstacles may block beams and forcing frequent re-configurations. This Thesis work aims to fill this gap from a practical approach. This Thesis proposes beam management mechanisms utilising the mechanisms and resources offered by the Third Generation Partnership Project (3GPP) 5G radio access standard: 5G New Radio (NR). The practical solutions are based on the efficient use of measurement reports of standardised downlink Reference Signals (RS). In first place, this Thesis provides a thorough state-of-the-art analysis and corroborates the need of adopting beam tracking solutions for mmWave networks. Then, a complete overview of the 5G standard mechanisms that enable beam tracking is given. The NR standard does not define a standardised mechanism for beam tracking, leaving the door open to proposals to carry out such monitoring. Once the technologies have been identified, the Thesis continues with assessing the impact of the beam tracking strategies on the network and link-level performance. The study is focused on individual point-to-point mmWave links in a realistic urban environment. Based on end-to-end network simulations, the Thesis is interested in assessing the beam tracking success ratio and how beam misalignment affects the perceived Signal to Noise plus Interference Ratio (SINR) and user throughput at pedestrian and vehicular speeds. The beam tracking solutions proposed in this Thesis fall into two categories. The first category monitors beams based on measuring and reporting beamformed RS. Regardless of the speed, this beam tracking category provides up to 91 % tracking performance, with little throughput reduction if the beams of interest are measured with a periodicity below 20 ms. Beam tracking in the second category relies on external information sources. Within this category, this Thesis proposes a fingerprinting database relating beams to the user position and a machine learning (ML) model. Fingerprinting beam tracking is technologically viable and provides similar performance levels. However, this solution is very sensitive to errors and requires considering all possible situations. The ML beam tracking, which makes predictions with a 16 % of estimation error for the reference data set.I want to thank the Spanish Ministry of Education and Professional Formation for funding this Thesis work with an official pre-doctoral contract grant.Herranz Claveras, C. (2019). Beam Tracking Strategies for 5G New Radio Networks Operating in the Millimetre Wave Bands [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/130845TESI

Signals of Opportunity for Positioning Purposes

O ver the last years, location-based services (LBS) have become popular due to the emergence of smartphones with capabilities of positioning their user’s location on Earth at unprecedented speed and convenience. Behind such feat are the technological advances in global navigation satellite systems (GNSS), such as Galileo, Globalnaya Navigazionnaya Sputnikovaya Sistema (GLONASS), Global Positioning Service (GPS) and Beidou. The easiness of smartphones and the improvement of positioning technology has driven LBS to be at the core of many business models. Some of these business models rely on the user’s location to pick him up on a car, relinquish a meal to him, offer insights on sports performance, locate items to be picked up on a warehouse, among many others.While LBS are driving the need to continuously locate the user at higher degrees of accuracy and across any environment, be it in a city park, an urban canyon or inside a corporate office, some of these environments pose a challenge for GNSS. Indoor environments are particularly challenging for GNSS due to the attenuation and strong multipath imposed by walls and building materials. Such challenges and difficulties in signal acquisition have led to the development of solutions and technologies to improve positioning in indoor environments.While there are several commercial systems available to fulfill the needs of most LBS in indoor environments, most of these are not feasible to deploy at a global scale due to their infrastructure costs. Hence, several solutions have sought to build upon existing infrastructure to provide positioning information.Building upon existing infrastructure is what leads to the main topic of this thesis, the concept of signals of opportunity (SoO). A SoO is any wireless signal that can be exploited for a positioning purpose despite its initial design seeking to fulfill a different purpose. A few examples of these signals are IEEE 802.11 signals, commonly known as WiFi, Bluetooth, digital video broadcasting - terrestrial (DVB-T) and many of the cellular signals, such as long-term evolution (LTE), universal mobile telecommunications system (UMTS) and global mobile system (GSM).The goal of this thesis is to address various challenges related to SoO for positioning. From the identification of SoO at the physical layer, how to merge them at the algorithmic level and how to put them in use for a cognitive positioning system (CPS)

Task-Driven Integrity Assessment and Control for Vehicular Hybrid Localization Systems

Throughout the last decade, vehicle localization has been attracting significant attention in a wide range of applications, including Navigation Systems, Road Tolling, Smart Parking, and Collision Avoidance. To deliver on their requirements, these applications need specific localization accuracy. However, current localization techniques lack the required accuracy, especially for mission critical applications. Although various approaches for improving localization accuracy have been reported in the literature, there is still a need for more efficient and more effective measures that can ascribe some level of accuracy to the localization process. These measures will enable localization systems to manage the localization process and resources so as to achieve the highest accuracy possible, and to mitigate the impact of inadequate accuracy on the target application. In this thesis, a framework for fusing different localization techniques is introduced in order to estimate the location of a vehicle along with location integrity assessment that captures the impact of the measurement conditions on the localization quality. Knowledge about estimate integrity allows the system to plan the use of its localization resources so as to match the target accuracy of the application. The framework introduced provides the tools that would allow for modeling the impact of the operation conditions on estimate accuracy and integrity, as such it enables more robust system performance in three steps. First, localization system parameters are utilized to contrive a feature space that constitutes probable accuracy classes. Due to the strong overlap among accuracy classes in the feature space, a hierarchical classification strategy is developed to address the class ambiguity problem via the class unfolding approach (HCCU). HCCU strategy is proven to be superior with respect to other hierarchical configuration. Furthermore, a Context Based Accuracy Classification (CBAC) algorithm is introduced to enhance the performance of the classification process. In this algorithm, knowledge about the surrounding environment is utilized to optimize classification performance as a function of the observation conditions. Second, a task-driven integrity (TDI) model is developed to enable the applications modules to be aware of the trust level of the localization output. Typically, this trust level functions in the measurement conditions; therefore, the TDI model monitors specific parameter(s) in the localization technique and, accordingly, infers the impact of the change in the environmental conditions on the quality of the localization process. A generalized TDI solution is also introduced to handle the cases where sufficient information about the sensing parameters is unavailable. Finally, the produce of the employed localization techniques (i.e., location estimates, accuracy, and integrity level assessment) needs to be fused. Nevertheless, these techniques are hybrid and their pieces of information are conflicting in many situations. Therefore, a novel evidence structure model called Spatial Evidence Structure Model (SESM) is developed and used in constructing a frame of discernment comprising discretized spatial data. SESM-based fusion paradigms are capable of performing a fusion process using the information provided by the techniques employed. Both the location estimate accuracy and aggregated integrity resultant from the fusion process demonstrate superiority over the employing localization techniques. Furthermore, a context aware task-driven resource allocation mechanism is developed to manage the fusion process. The main objective of this mechanism is to optimize the usage of system resources and achieve a task-driven performance. Extensive experimental work is conducted on real-life and simulated data to validate models developed in this thesis. It is evident from the experimental results that task-driven integrity assessment and control is applicable and effective on hybrid localization systems