Autonomic State Management for Optimistic Simulation Platforms

We present the design and implementation of an autonomic state manager (ASM) tailored for integration within optimistic parallel discrete event simulation (PDES) environments based on the C programming language and the executable and linkable format (ELF), and developed for execution on x8664 architectures. With ASM, the state of any logical process (LP), namely the individual (concurrent) simulation unit being part of the simulation model, is allowed to be scattered on dynamically allocated memory chunks managed via standard API (e.g., malloc/free). Also, the application programmer is not required to provide any serialization/deserialization module in order to take a checkpoint of the LP state, or to restore it in case a causality error occurs during the optimistic run, or to provide indications on which portions of the state are updated by event processing, so to allow incremental checkpointing. All these tasks are handled by ASM in a fully transparent manner via (A) runtime identification (with chunk-level granularity) of the memory map associated with the LP state, and (B) runtime tracking of the memory updates occurring within chunks belonging to the dynamic memory map. The co-existence of the incremental and non-incremental log/restore modes is achieved via dual versions of the same application code, transparently generated by ASM via compile/link time facilities. Also, the dynamic selection of the best suited log/restore mode is actuated by ASM on the basis of an innovative modeling/optimization approach which takes into account stability of each operating mode with respect to variations of the model/environmental execution parameters

A Distribution Network Reconfiguration and Islanding Strategy

With the development of Smart Grid, the reliability and stability of the power system are significantly improved. However, a large-scale outage still possibly occurs when the power system is exposed to extreme conditions. Power system blackstart, the restoration after a complete or partial outage is a key issue needed to be studied for the safety of power system. Network reconfiguration is one of the most important steps when crews try to rapidly restore the network. Therefore, planning an optimal network reconfiguration scheme with the most efficient restoration target at the primary stage of system restoration is necessary and it also builds the foundation to the following restoration process. Besides, the utilization of distributed generators (DGs) has risen sharply in the power system and it plays a critical role in the future Smart Grid to modernize the power grid. The emerging Smart Grid technology, which enables self-sufficient power systems with DGs, provides further opportunities to enhance self-healing capability. The introduction of DGs makes a quick and efficient restoration of power system possible. In this thesis, based on the topological characteristics of scale-free networks and the Discrete Particle Swarm Optimization (DPSO) algorithm, a network reconfiguration scheme is proposed. A power system structure can be converted into a system consisting of nodes and edges. Indices that reflect the nodes’ and edges’ topological characteristics in Graph Theory can be utilized to describe the importance of loads and transmission lines in the power system. Therefore, indices like node importance degree, line betweenness centrality and clustering coefficient are introduced to weigh the importance of loads and transmission lines. Based on these indices, an objective function which aims to restore as many important loads and transmission lines as possible and also subjected to constraints is formulated. The effectiveness of potential reconfiguration scheme is verified by Depth First Search (DFS) algorithm. Finally, DPSO algorithm is employed to obtain the optimal reconfiguration scheme. The comprehensive reconfiguration scheme proposed by my thesis can be the theoretical basis for the power grid dispatchers. Besides, DGs are introduced in this thesis to enhance the restoration efficiency and success rate at the primary stage of network restoration. Firstly, the selection and classification principle of DGs are introduced in my thesis. In addition, the start sequence principle of DGs is presented as a foundation for the following stability analysis of network restoration with DGs. Then, the objective function subjected to constraints that aims to restore as many important loads as possible is formulated. Based on the restoration objective, islands that include part of important and restorable loads are formed because the DGs’ capacity cannot ensure an entire restoration of the outage areas. Finally, DPSO is used to obtain the optimal solution of islanding strategy and the state sequence matrix is utilized to represent the solution space. It is believed that this work will provide some useful insight into improving the power system resiliency in the face of extreme events such as natural or man-made disasters

Efficient Architecture and Implementation of Vector Median Filter in Co-Design Context

This work presents an efficient fast parallel architecture of the Vector Median Filter (VMF) using combined hardware/software (HW/SW) implementation. The hardware part of the system is implemented using VHDL language, whereas the software part is developed using C/C++ language. The software part of the embedded system uses the NIOS-II softcore processor and the operating system used is μClinux. The comparison between the software and HW/SW solutions shows that adding a hardware part in the design attempts to speed up the filtering process compared to the software solution. This efficient embedded system implementation can perform well in several image processing applications

ADVANCES IN SYSTEM RELIABILITY-BASED DESIGN AND PROGNOSTICS AND HEALTH MANAGEMENT (PHM) FOR SYSTEM RESILIENCE ANALYSIS AND DESIGN

Failures of engineered systems can lead to significant economic and societal losses. Despite tremendous efforts (e.g., $200 billion annually) denoted to reliability and maintenance, unexpected catastrophic failures still occurs. To minimize the losses, reliability of engineered systems must be ensured throughout their life-cycle amidst uncertain operational condition and manufacturing variability. In most engineered systems, the required system reliability level under adverse events is achieved by adding system redundancies and/or conducting system reliability-based design optimization (RBDO). However, a high level of system redundancy increases a system's life-cycle cost (LCC) and system RBDO cannot ensure the system reliability when unexpected loading/environmental conditions are applied and unexpected system failures are developed. In contrast, a new design paradigm, referred to as resilience-driven system design, can ensure highly reliable system designs under any loading/environmental conditions and system failures while considerably reducing systems' LCC. In order to facilitate the development of formal methodologies for this design paradigm, this research aims at advancing two essential and co-related research areas: Research Thrust 1 - system RBDO and Research Thrust 2 - system prognostics and health management (PHM). In Research Thrust 1, reliability analyses under uncertainty will be carried out in both component and system levels against critical failure mechanisms. In Research Thrust 2, highly accurate and robust PHM systems will be designed for engineered systems with a single or multiple time-scale(s). To demonstrate the effectiveness of the proposed system RBDO and PHM techniques, multiple engineering case studies will be presented and discussed. Following the development of Research Thrusts 1 and 2, Research Thrust 3 - resilience-driven system design will establish a theoretical basis and design framework of engineering resilience in a mathematical and statistical context, where engineering resilience will be formulated in terms of system reliability and restoration and the proposed design framework will be demonstrated with a simplified aircraft control actuator design problem

RISK ASSESSMENT OF MALICIOUS ATTACKS AGAINST POWER SYSTEMS

The new scenarios of malicious attack prompt for their deeper consideration and mainly when critical systems are at stake. In this framework, infrastructural systems, including power systems, represent a possible target due to the huge impact they can have on society. Malicious attacks are different in their nature from other more traditional cause of threats to power system, since they embed a strategic interaction between the attacker and the defender (characteristics that cannot be found in natural events or systemic failures). This difference has not been systematically analyzed by the existent literature. In this respect, new approaches and tools are needed. This paper presents a mixed-strategy game-theory model able to capture the strategic interactions between malicious agents that may be willing to attack power systems and the system operators, with its related bodies, that are in charge of defending them. At the game equilibrium, the different strategies of the two players, in terms of attacking/protecting the critical elements of the systems, can be obtained. The information about the attack probability to various elements can be used to assess the risk associated with each of them, and the efficiency of defense resource allocation is evidenced in terms of the corresponding risk. Reference defense plans related to the online defense action and the defense action with a time delay can be obtained according to their respective various time constraints. Moreover, risk sensitivity to the defense/attack-resource variation is also analyzed. The model is applied to a standard IEEE RTS-96 test system for illustrative purpose and, on the basis of that system, some peculiar aspects of the malicious attacks are pointed ou

Design of a High-Speed Architecture for Stabilization of Video Captured Under Non-Uniform Lighting Conditions

Video captured in shaky conditions may lead to vibrations. A robust algorithm to immobilize the video by compensating for the vibrations from physical settings of the camera is presented in this dissertation. A very high performance hardware architecture on Field Programmable Gate Array (FPGA) technology is also developed for the implementation of the stabilization system. Stabilization of video sequences captured under non-uniform lighting conditions begins with a nonlinear enhancement process. This improves the visibility of the scene captured from physical sensing devices which have limited dynamic range. This physical limitation causes the saturated region of the image to shadow out the rest of the scene. It is therefore desirable to bring back a more uniform scene which eliminates the shadows to a certain extent. Stabilization of video requires the estimation of global motion parameters. By obtaining reliable background motion, the video can be spatially transformed to the reference sequence thereby eliminating the unintended motion of the camera. A reflectance-illuminance model for video enhancement is used in this research work to improve the visibility and quality of the scene. With fast color space conversion, the computational complexity is reduced to a minimum. The basic video stabilization model is formulated and configured for hardware implementation. Such a model involves evaluation of reliable features for tracking, motion estimation, and affine transformation to map the display coordinates of a stabilized sequence. The multiplications, divisions and exponentiations are replaced by simple arithmetic and logic operations using improved log-domain computations in the hardware modules. On Xilinx\u27s Virtex II 2V8000-5 FPGA platform, the prototype system consumes 59% logic slices, 30% flip-flops, 34% lookup tables, 35% embedded RAMs and two ZBT frame buffers. The system is capable of rendering 180.9 million pixels per second (mpps) and consumes approximately 30.6 watts of power at 1.5 volts. With a 1024×1024 frame, the throughput is equivalent to 172 frames per second (fps). Future work will optimize the performance-resource trade-off to meet the specific needs of the applications. It further extends the model for extraction and tracking of moving objects as our model inherently encapsulates the attributes of spatial distortion and motion prediction to reduce complexity. With these parameters to narrow down the processing range, it is possible to achieve a minimum of 20 fps on desktop computers with Intel Core 2 Duo or Quad Core CPUs and 2GB DDR2 memory without a dedicated hardware