12 research outputs found

    Vocal Tract Length Normalization for Statistical Parametric Speech Synthesis

    Get PDF
    Vocal tract length normalization (VTLN) has been successfully used in automatic speech recognition for improved performance. The same technique can be implemented in statistical parametric speech synthesis for rapid speaker adaptation during synthesis. This paper presents an efficient implementation of VTLN using expectation maximization and addresses the key challenges faced in implementing VTLN for synthesis. Jacobian normalization, high dimensionality features and truncation of the transformation matrix are a few challenges presented with the appropriate solutions. Detailed evaluations are performed to estimate the most suitable technique for using VTLN in speech synthesis. Evaluating VTLN in the framework of speech synthesis is also not an easy task since the technique does not work equally well for all speakers. Speakers have been selected based on different objective and subjective criteria to demonstrate the difference between systems. The best method for implementing VTLN is confirmed to be use of the lower order features for estimating warping factors

    Bias Adaptation for Vocal Tract Length Normalization

    Get PDF
    Vocal tract length normalisation (VTLN) is a well known rapid adaptation technique. VTLN as a linear transformation in the cepstral domain results in the scaling and translation factors. The warping factor represents the spectral scaling parameter. While, the translation factor represented by bias term captures more speaker characteristics especially in a rapid adaptation framework without having the risk of over-fitting. This paper presents a complete and comprehensible derivation of the bias transformation for VTLN and implements it in a unified framework for statistical parametric speech synthesis and recognition. The recognition experiments show that bias term improves the rapid adaptation performance and gives additional performance over the cepstral mean normalisation factor. It was observed from the synthesis results that VTLN bias term did not have much effect in combination with model adaptation techniques that already have a bias transformation incorporated

    Speaker normalisation for large vocabulary multiparty conversational speech recognition

    Get PDF
    One of the main problems faced by automatic speech recognition is the variability of the testing conditions. This is due both to the acoustic conditions (different transmission channels, recording devices, noises etc.) and to the variability of speech across different speakers (i.e. due to different accents, coarticulation of phonemes and different vocal tract characteristics). Vocal tract length normalisation (VTLN) aims at normalising the acoustic signal, making it independent from the vocal tract length. This is done by a speaker specific warping of the frequency axis parameterised through a warping factor. In this thesis the application of VTLN to multiparty conversational speech was investigated focusing on the meeting domain. This is a challenging task showing a great variability of the speech acoustics both across different speakers and across time for a given speaker. VTL, the distance between the lips and the glottis, varies over time. We observed that the warping factors estimated using Maximum Likelihood seem to be context dependent: appearing to be influenced by the current conversational partner and being correlated with the behaviour of formant positions and the pitch. This is because VTL also influences the frequency of vibration of the vocal cords and thus the pitch. In this thesis we also investigated pitch-adaptive acoustic features with the goal of further improving the speaker normalisation provided by VTLN. We explored the use of acoustic features obtained using a pitch-adaptive analysis in combination with conventional features such as Mel frequency cepstral coefficients. These spectral representations were combined both at the acoustic feature level using heteroscedastic linear discriminant analysis (HLDA), and at the system level using ROVER. We evaluated this approach on a challenging large vocabulary speech recognition task: multiparty meeting transcription. We found that VTLN benefits the most from pitch-adaptive features. Our experiments also suggested that combining conventional and pitch-adaptive acoustic features using HLDA results in a consistent, significant decrease in the word error rate across all the tasks. Combining at the system level using ROVER resulted in a further significant improvement. Further experiments compared the use of pitch adaptive spectral representation with the adoption of a smoothed spectrogram for the extraction of cepstral coefficients. It was found that pitch adaptive spectral analysis, providing a representation which is less affected by pitch artefacts (especially for high pitched speakers), delivers features with an improved speaker independence. Furthermore this has also shown to be advantageous when HLDA is applied. The combination of a pitch adaptive spectral representation and VTLN based speaker normalisation in the context of LVCSR for multiparty conversational speech led to more speaker independent acoustic models improving the overall recognition performances

    Creating synthetic voices for children by adapting adult average voice using stacked transformations and VTLN

    Full text link

    Current trends in multilingual speech processing

    Get PDF
    In this paper, we describe recent work at Idiap Research Institute in the domain of multilingual speech processing and provide some insights into emerging challenges for the research community. Multilingual speech processing has been a topic of ongoing interest to the research community for many years and the field is now receiving renewed interest owing to two strong driving forces. Firstly, technical advances in speech recognition and synthesis are posing new challenges and opportunities to researchers. For example, discriminative features are seeing wide application by the speech recognition community, but additional issues arise when using such features in a multilingual setting. Another example is the apparent convergence of speech recognition and speech synthesis technologies in the form of statistical parametric methodologies. This convergence enables the investigation of new approaches to unified modelling for automatic speech recognition and text-to-speech synthesis (TTS) as well as cross-lingual speaker adaptation for TTS. The second driving force is the impetus being provided by both government and industry for technologies to help break down domestic and international language barriers, these also being barriers to the expansion of policy and commerce. Speech-to-speech and speech-to-text translation are thus emerging as key technologies at the heart of which lies multilingual speech processin

    Temporally Varying Weight Regression for Speech Recognition

    Get PDF
    Ph.DDOCTOR OF PHILOSOPH

    Subspace Gaussian mixture models for automatic speech recognition

    Get PDF
    In most of state-of-the-art speech recognition systems, Gaussian mixture models (GMMs) are used to model the density of the emitting states in the hidden Markov models (HMMs). In a conventional system, the model parameters of each GMM are estimated directly and independently given the alignment. This results a large number of model parameters to be estimated, and consequently, a large amount of training data is required to fit the model. In addition, different sources of acoustic variability that impact the accuracy of a recogniser such as pronunciation variation, accent, speaker factor and environmental noise are only weakly modelled and factorized by adaptation techniques such as maximum likelihood linear regression (MLLR), maximum a posteriori adaptation (MAP) and vocal tract length normalisation (VTLN). In this thesis, we will discuss an alternative acoustic modelling approach — the subspace Gaussian mixture model (SGMM), which is expected to deal with these two issues better. In an SGMM, the model parameters are derived from low-dimensional model and speaker subspaces that can capture phonetic and speaker correlations. Given these subspaces, only a small number of state-dependent parameters are required to derive the corresponding GMMs. Hence, the total number of model parameters can be reduced, which allows acoustic modelling with a limited amount of training data. In addition, the SGMM-based acoustic model factorizes the phonetic and speaker factors and within this framework, other source of acoustic variability may also be explored. In this thesis, we propose a regularised model estimation for SGMMs, which avoids overtraining in case that the training data is sparse. We will also take advantage of the structure of SGMMs to explore cross-lingual acoustic modelling for low-resource speech recognition. Here, the model subspace is estimated from out-domain data and ported to the target language system. In this case, only the state-dependent parameters need to be estimated which relaxes the requirement of the amount of training data. To improve the robustness of SGMMs against environmental noise, we propose to apply the joint uncertainty decoding (JUD) technique that is shown to be efficient and effective. We will report experimental results on the Wall Street Journal (WSJ) database and GlobalPhone corpora to evaluate the regularisation and cross-lingual modelling of SGMMs. Noise compensation using JUD for SGMM acoustic models is evaluated on the Aurora 4 database

    Robust learning of acoustic representations from diverse speech data

    Get PDF
    Automatic speech recognition is increasingly applied to new domains. A key challenge is to robustly learn, update and maintain representations to cope with transient acoustic conditions. A typical example is broadcast media, for which speakers and environments may change rapidly, and available supervision may be poor. The concern of this thesis is to build and investigate methods for acoustic modelling that are robust to the characteristics and transient conditions as embodied by such media. The first contribution of the thesis is a technique to make use of inaccurate transcriptions as supervision for acoustic model training. There is an abundance of audio with approximate labels, but training methods can be sensitive to label errors, and their use is therefore not trivial. State-of-the-art semi-supervised training makes effective use of a lattice of supervision, inherently encoding uncertainty in the labels to avoid overfitting to poor supervision, but does not make use of the transcriptions. Existing approaches that do aim to make use of the transcriptions typically employ an algorithm to filter or combine the transcriptions with the recognition output from a seed model, but the final result does not encode uncertainty. We propose a method to combine the lattice output from a biased recognition pass with the transcripts, crucially preserving uncertainty in the lattice where appropriate. This substantially reduces the word error rate on a broadcast task. The second contribution is a method to factorise representations for speakers and environments so that they may be combined in novel combinations. In realistic scenarios, the speaker or environment transform at test time might be unknown, or there may be insufficient data to learn a joint transform. We show that in such cases, factorised, or independent, representations are required to avoid deteriorating performance. Using i-vectors, we factorise speaker or environment information using multi-condition training with neural networks. Specifically, we extract bottleneck features from networks trained to classify either speakers or environments. The resulting factorised representations prove beneficial when one factor is missing at test time, or when all factors are seen, but not in the desired combination. The third contribution is an investigation of model adaptation in a longitudinal setting. In this scenario, we repeatedly adapt a model to new data, with the constraint that previous data becomes unavailable. We first demonstrate the effect of such a constraint, and show that using a cyclical learning rate may help. We then observe that these successive models lend themselves well to ensembling. Finally, we show that the impact of this constraint in an active learning setting may be detrimental to performance, and suggest to combine active learning with semi-supervised training to avoid biasing the model. The fourth contribution is a method to adapt low-level features in a parameter-efficient and interpretable manner. We propose to adapt the filters in a neural feature extractor, known as SincNet. In contrast to traditional techniques that warp the filterbank frequencies in standard feature extraction, adapting SincNet parameters is more flexible and more readily optimised, whilst maintaining interpretability. On a task adapting from adult to child speech, we show that this layer is well suited for adaptation and is very effective with respect to the small number of adapted parameters

    Statistical models for noise-robust speech recognition

    Get PDF
    A standard way of improving the robustness of speech recognition systems to noise is model compensation. This replaces a speech recogniser's distributions over clean speech by ones over noise-corrupted speech. For each clean speech component, model compensation techniques usually approximate the corrupted speech distribution with a diagonal-covariance Gaussian distribution. This thesis looks into improving on this approximation in two ways: firstly, by estimating full-covariance Gaussian distributions; secondly, by approximating corrupted-speech likelihoods without any parameterised distribution. The first part of this work is about compensating for within-component feature correlations under noise. For this, the covariance matrices of the computed Gaussians should be full instead of diagonal. The estimation of off-diagonal covariance elements turns out to be sensitive to approximations. A popular approximation is the one that state-of-the-art compensation schemes, like VTS compensation, use for dynamic coefficients: the continuous-time approximation. Standard speech recognisers contain both per-time slice, static, coefficients, and dynamic coefficients, which represent signal changes over time, and are normally computed from a window of static coefficients. To remove the need for the continuous-time approximation, this thesis introduces a new technique. It first compensates a distribution over the window of statics, and then applies the same linear projection that extracts dynamic coefficients. It introduces a number of methods that address the correlation changes that occur in noise within this framework. The next problem is decoding speed with full covariances. This thesis re-analyses the previously-introduced predictive linear transformations, and shows how they can model feature correlations at low and tunable computational cost. The second part of this work removes the Gaussian assumption completely. It introduces a sampling method that, given speech and noise distributions and a mismatch function, in the limit calculates the corrupted speech likelihood exactly. For this, it transforms the integral in the likelihood expression, and then applies sequential importance resampling. Though it is too slow to use for recognition, it enables a more fine-grained assessment of compensation techniques, based on the KL divergence to the ideal compensation for one component. The KL divergence proves to predict the word error rate well. This technique also makes it possible to evaluate the impact of approximations that standard compensation schemes make.This work was supported by Toshiba Research Europe Ltd., Cambridge Research Laboratory
    corecore