264 research outputs found
Inclined Surface Locomotion Strategies for Spherical Tensegrity Robots
This paper presents a new teleoperated spherical tensegrity robot capable of
performing locomotion on steep inclined surfaces. With a novel control scheme
centered around the simultaneous actuation of multiple cables, the robot
demonstrates robust climbing on inclined surfaces in hardware experiments and
speeds significantly faster than previous spherical tensegrity models. This
robot is an improvement over other iterations in the TT-series and the first
tensegrity to achieve reliable locomotion on inclined surfaces of up to
24\degree. We analyze locomotion in simulation and hardware under single and
multi-cable actuation, and introduce two novel multi-cable actuation policies,
suited for steep incline climbing and speed, respectively. We propose
compelling justifications for the increased dynamic ability of the robot and
motivate development of optimization algorithms able to take advantage of the
robot's increased control authority.Comment: 6 pages, 11 figures, IROS 201
Deep Reinforcement Learning for Tensegrity Robot Locomotion
Tensegrity robots, composed of rigid rods connected by elastic cables, have a
number of unique properties that make them appealing for use as planetary
exploration rovers. However, control of tensegrity robots remains a difficult
problem due to their unusual structures and complex dynamics. In this work, we
show how locomotion gaits can be learned automatically using a novel extension
of mirror descent guided policy search (MDGPS) applied to periodic locomotion
movements, and we demonstrate the effectiveness of our approach on tensegrity
robot locomotion. We evaluate our method with real-world and simulated
experiments on the SUPERball tensegrity robot, showing that the learned
policies generalize to changes in system parameters, unreliable sensor
measurements, and variation in environmental conditions, including varied
terrains and a range of different gravities. Our experiments demonstrate that
our method not only learns fast, power-efficient feedback policies for rolling
gaits, but that these policies can succeed with only the limited onboard
sensing provided by SUPERball's accelerometers. We compare the learned feedback
policies to learned open-loop policies and hand-engineered controllers, and
demonstrate that the learned policy enables the first continuous, reliable
locomotion gait for the real SUPERball robot. Our code and other supplementary
materials are available from http://rll.berkeley.edu/drl_tensegrityComment: International Conference on Robotics and Automation (ICRA), 2017.
Project website link is http://rll.berkeley.edu/drl_tensegrit
A Bio-Inspired Tensegrity Manipulator with Multi-DOF, Structurally Compliant Joints
Most traditional robotic mechanisms feature inelastic joints that are unable
to robustly handle large deformations and off-axis moments. As a result, the
applied loads are transferred rigidly throughout the entire structure. The
disadvantage of this approach is that the exerted leverage is magnified at each
subsequent joint possibly damaging the mechanism. In this paper, we present two
lightweight, elastic, bio-inspired tensegrity robotics arms which mitigate this
danger while improving their mechanism's functionality. Our solutions feature
modular tensegrity structures that function similarly to the human elbow and
the human shoulder when connected. Like their biological counterparts, the
proposed robotic joints are flexible and comply with unanticipated forces. Both
proposed structures have multiple passive degrees of freedom and four active
degrees of freedom (two from the shoulder and two from the elbow). The
structural advantages demonstrated by the joints in these manipulators
illustrate a solution to the fundamental issue of elegantly handling off-axis
compliance.Comment: IROS 201
Design and Evolution of a Modular Tensegrity Robot Platform
NASA Ames Research Center is developing a compliant modular tensegrity robotic platform for planetary exploration. In this paper we present the design and evolution of the platform's main hardware component, an untethered, robust tensegrity strut, with rich sensor feedback and cable actuation. Each strut is a complete robot, and multiple struts can be combined together to form a wide range of complex tensegrity robots. Our current goal for the tensegrity robotic platform is the development of SUPERball, a 6-strut icosahedron underactuated tensegrity robot aimed at dynamic locomotion for planetary exploration rovers and landers, but the aim is for the modular strut to enable a wide range of tensegrity morphologies. SUPERball is a second generation prototype, evolving from the tensegrity robot ReCTeR, which is also a modular, lightweight, highly compliant 6-strut tensegrity robot that was used to validate our physics based NASA Tensegrity Robot Toolkit (NTRT) simulator. Many hardware design parameters of the SUPERball were driven by locomotion results obtained in our validated simulator. These evolutionary explorations helped constrain motor torque and speed parameters, along with strut and string stress. As construction of the hardware has finalized, we have also used the same evolutionary framework to evolve controllers that respect the built hardware parameters
Path planning for active tensegrity structures
This paper presents a path planning method for actuated tensegrity structures with quasi-static motion. The valid configurations for such structures lay on an equilibrium manifold, which is implicitly defined by a set of kinematic and static constraints. The exploration of this manifold is difficult with standard methods due to the lack of a global parameterization. Thus, this paper proposes the use of techniques with roots in differential geometry to define an atlas, i.e., a set of coordinated local parameterizations of the equilibrium manifold. This atlas is exploited to define a rapidly-exploring random tree, which efficiently finds valid paths between configurations. However, these paths are typically long and jerky and, therefore, this paper also introduces a procedure to reduce their control effort. A variety of test cases are presented to empirically evaluate the proposed method. (C) 2015 Elsevier Ltd. All rights reserved.Peer ReviewedPostprint (author's final draft
Object Manipulation with Modular Planar Tensegrity Robots
This thesis explores the creation of a novel two-dimensional tensegrity-based mod- ular system. When individual planar modules are linked together, they form a larger tensegrity robot that can be used to achieve non-prehensile manipulation. The first half of this dissertation focuses on the study of preexisting types of tensegrity mod- ules and proposes different possible structures and arrangements of modules. The second half describes the construction and actuation of a modular 2D robot com- posed of planar three-bar tensegrity structures. We conclude that tensegrity modules are suitably adapted to object manipulation and propose a future extension of the modular 2D design to a modular 3D design
Controlling Tensegrity Robots Through Evolution
Tensegrity structures (built from interconnected rods and cables) have the potential to offer a revolutionary new robotic design that is light-weight, energy-efficient, robust to failures, capable of unique modes of locomotion, impact tolerant, and compliant (reducing damage between the robot and its environment). Unfortunately robots built from tensegrity structures are difficult to control with traditional methods due to their oscillatory nature, nonlinear coupling between components and overall complexity. Fortunately this formidable control challenge can be overcome through the use of evolutionary algorithms. In this paper we show that evolutionary algorithms can be used to efficiently control a ball-shaped tensegrity robot. Experimental results performed with a variety of evolutionary algorithms in a detailed soft-body physics simulator show that a centralized evolutionary algorithm performs 400 percent better than a hand-coded solution, while the multi-agent evolution performs 800 percent better. In addition, evolution is able to discover diverse control solutions (both crawling and rolling) that are robust against structural failures and can be adapted to a wide range of energy and actuation constraints. These successful controls will form the basis for building high-performance tensegrity robots in the near future
In silico case studies of compliant robots: AMARSI deliverable 3.3
In the deliverable 3.2 we presented how the morphological computing ap-
proach can significantly facilitate the control strategy in several scenarios,
e.g. quadruped locomotion, bipedal locomotion and reaching. In particular,
the Kitty experimental platform is an example of the use of morphological
computation to allow quadruped locomotion. In this deliverable we continue
with the simulation studies on the application of the different morphological
computation strategies to control a robotic system
- …