Time-Energy Optimal Cluster Space Motion Planning for Mobile Robot Formations

The motions of a formation of mobile robots along predetermined paths are optimized according to a tunable time-energy cost function using the cluster space approach to multiagent system specification and control. Upon path-parameterizing cluster state variables describing the geometry and pose of a multirobot group, an optimal control problem is formulated that incorporates formation dynamics and state constraints. The optimal trajectory is derived numerically via a gradient search, iterating over the initial value of one costate. A multirobot formation control simulation is then used to demonstrate the effectiveness of the technique. Results indicate that a substantial tradeoff is made between energy expenditure and motion time when considered as minimization criteria in varying proportions, allowing the operator to tailor mission trajectories according to desired levels of each

Monitoring using Heterogeneous Autonomous Agents.

This dissertation studies problems involving different types of autonomous agents observing objects of interests in an area. Three types of agents are considered: mobile agents, stationary agents, and marsupial agents, i.e., agents capable of deploying other agents or being deployed themselves. Objects can be mobile or stationary. The problem of a mobile agent without fuel constraints revisiting stationary objects is formulated. Visits to objects are dictated by revisit deadlines, i.e., the maximum time that can elapse between two visits to the same object. The problem is shown to be NP-complete and heuristics are provided to generate paths for the agent. Almost periodic paths are proven to exist. The efficacy of the heuristics is shown through simulation. A variant of the problem where the agent has a finite fuel capacity and purchases fuel is treated. Almost periodic solutions to this problem are also shown to exist and an algorithm to compute the minimal cost path is provided. A problem where mobile and stationary agents cooperate to track a mobile object is formulated, shown to be NP-hard, and a heuristic is given to compute paths for the mobile agents. Optimal configurations for the stationary agents are then studied. Several methods are provided to optimally place the stationary agents; these methods are the maximization of Fisher information, the minimization of the probability of misclassification, and the minimization of the penalty incurred by the placement. A method to compute optimal revisit deadlines for the stationary agents is given. The placement methods are compared and their effectiveness shown using numerical results. The problem of two marsupial agents, one carrier and one passenger, performing a general monitoring task using a constrained optimization formulation is stated. Necessary conditions for optimal paths are provided for cases accounting for constrained release of the passenger, termination conditions for the task, as well as retrieval and constrained retrieval of the passenger. A problem involving two marsupial agents collecting information about a stationary object while avoiding detection is then formulated. Necessary conditions for optimal paths are provided and rectilinear motion is demonstrated to be optimal for both agents.PhDAerospace EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111439/1/jfargeas_1.pd

Formulation of control strategies for requirement definition of multi-agent surveillance systems

In a multi-agent system (MAS), the overall performance is greatly influenced by both the design and the control of the agents. The physical design determines the agent capabilities, and the control strategies drive the agents to pursue their objectives using the available capabilities. The objective of this thesis is to incorporate control strategies in the early conceptual design of an MAS. As such, this thesis proposes a methodology that mainly explores the interdependency between the design variables of the agents and the control strategies used by the agents. The output of the proposed methodology, i.e. the interdependency between the design variables and the control strategies, can be utilized in the requirement analysis as well as in the later design stages to optimize the overall system through some higher fidelity analyses. In this thesis, the proposed methodology is applied to a persistent multi-UAV surveillance problem, whose objective is to increase the situational awareness of a base that receives some instantaneous monitoring information from a group of UAVs. Each UAV has a limited energy capacity and a limited communication range. Accordingly, the connectivity of the communication network becomes essential for the information flow from the UAVs to the base. In long-run missions, the UAVs need to return to the base for refueling with certain frequencies depending on their endurance. Whenever a UAV leaves the surveillance area, the remaining UAVs may need relocation to mitigate the impact of its absence. In the control part of this thesis, a set of energy-aware control strategies are developed for efficient multi-UAV surveillance operations. To this end, this thesis first proposes a decentralized strategy to recover the connectivity of the communication network. Second, it presents two return policies for UAVs to achieve energy-aware persistent surveillance. In the design part of this thesis, a design space exploration is performed to investigate the overall performance by varying a set of design variables and the candidate control strategies. Overall, it is shown that a control strategy used by an MAS affects the influence of the design variables on the mission performance. Furthermore, the proposed methodology identifies the preferable pairs of design variables and control strategies through low fidelity analysis in the early design stages.Ph.D

Decentralized Autonomous Navigation Strategies for Multi-Robot Search and Rescue

In this report, we try to improve the performance of existing approaches for search operations in multi-robot context. We propose three novel algorithms that are using a triangular grid pattern, i.e., robots certainly go through the vertices of a triangular grid during the search procedure. The main advantage of using a triangular grid pattern is that it is asymptotically optimal in terms of the minimum number of robots required for the complete coverage of an arbitrary bounded area. We use a new topological map which is made and shared by robots during the search operation. We consider an area that is unknown to the robots a priori with an arbitrary shape, containing some obstacles. Unlike many current heuristic algorithms, we give mathematically proofs of convergence of the algorithms. The computer simulation results for the proposed algorithms are presented using a simulator of real robots and environment. We evaluate the performance of the algorithms via experiments with real robots. We compare the performance of our own algorithms with three existing algorithms from other researchers. The results demonstrate the merits of our proposed solution. A further study on formation building with obstacle avoidance for a team of mobile robots is presented in this report. We propose a decentralized formation building with obstacle avoidance algorithm for a group of mobile robots to move in a defined geometric configuration. Furthermore, we consider a more complicated formation problem with a group of anonymous robots; these robots are not aware of their position in the final configuration and need to reach a consensus during the formation process. We propose a randomized algorithm for the anonymous robots that achieves the convergence to a desired configuration with probability 1. We also propose a novel obstacle avoidance rule, used in the formation building algorithm.Comment: arXiv admin note: substantial text overlap with arXiv:1402.5188 by other author

Middleware Technologies for Cloud of Things - a survey

The next wave of communication and applications rely on the new services provided by Internet of Things which is becoming an important aspect in human and machines future. The IoT services are a key solution for providing smart environments in homes, buildings and cities. In the era of a massive number of connected things and objects with a high grow rate, several challenges have been raised such as management, aggregation and storage for big produced data. In order to tackle some of these issues, cloud computing emerged to IoT as Cloud of Things (CoT) which provides virtually unlimited cloud services to enhance the large scale IoT platforms. There are several factors to be considered in design and implementation of a CoT platform. One of the most important and challenging problems is the heterogeneity of different objects. This problem can be addressed by deploying suitable "Middleware". Middleware sits between things and applications that make a reliable platform for communication among things with different interfaces, operating systems, and architectures. The main aim of this paper is to study the middleware technologies for CoT. Toward this end, we first present the main features and characteristics of middlewares. Next we study different architecture styles and service domains. Then we presents several middlewares that are suitable for CoT based platforms and lastly a list of current challenges and issues in design of CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268, Digital Communications and Networks, Elsevier (2017