A Global Human Settlement Layer from optical high resolution imagery - Concept and first results

A general framework for processing of high and very-high resolution imagery for creating a Global Human Settlement Layer (GHSL) is presented together with a discussion on the results of the first operational test of the production workflow. The test involved the mapping of 24.3 millions of square kilometres of the Earth surface spread over four continents, corresponding to an estimated population of 1.3 billion of people in 2010. The resolution of the input image data ranges from 0.5 to 10 meters, collected by a heterogeneous set of platforms including satellite SPOT (2 and 5), CBERS-2B, RapidEye (2 and 4), WorldView (1 and 2), GeoEye-1, QuickBird-2, Ikonos-2, and airborne sensors. Several imaging modes were tested including panchromatic, multispectral and pan-sharpened images. A new fully automatic image information extraction, generalization and mosaic workflow is presented that is based on multiscale textural and morphological image features extraction. New image feature compression and optimization are introduced, together with new learning and classification techniques allowing for the processing of HR/VHR image data using low-resolution thematic layers as reference. A new systematic approach for quality control and validation allowing global spatial and thematic consistency checking is proposed and applied. The quality of the results are discussed by sensor, by band, by resolution, and eco-regions. Critical points, lessons learned and next steps are highlighted.JRC.G.2-Global security and crisis managemen

Settlement type classification using aerial images.

M. Sc. University of KwaZulu-Natal, Durban 2014.In metropolitan and urban areas, the problems relating to rapid transformations that are taking place in terms of land cover and land use are now very pronounced, e.g., the rapid increase and unpredictable spread of formal and informal physical infrastructure. As a result, the availability of detailed, timely information on urban areas is of considerable importance both to the management of current urban activities and to forward planning. Remote sensing sources can make a vital contribution in this context, since they provide regular and recurring data from a single, consistent source. Pattern recognition techniques have been demonstrated to be effective in distinguishing and classifying human settlements. However, these methods are not ideal as they perform poorly when presented with imagery of the same area acquired at different dates. The poor generalization ability is mainly caused by large off-nadir viewing angles which produce image pairs with different viewing- and illumination-geometries. Classification performance is also decreased by differences in shadow length and orientation. The objective of this research is to improve the generalisation ability of the automated classification of human settlements using only remote sensing data over urban areas. The multiresolution local binary patterns (LBPs) algorithm, extended with an orthogonal variance measure for measuring local contrast features (i.e., the extended LBP) has been shown to excel at texture classification tasks. To minimize the viewing- and illumination-geometry effects and improve settlement classification, the extended LBP was applied to high spatial resolution panchromatic aerial images. The addition of a contrast component to the LBP features does not directly affect the desired invariance to shadow orientation and length, but it is expected that the richer features will nevertheless improve settlement classification accuracy. The extended LBP method was evaluated using a support vector machine (SVM) classifier for cross-date (training and test images of the same area acquired at different dates) and samedate analysis. For comparable results, LBPs without contrast features were also evaluated. The results showed the extended LBP to have a strong spatial and temporal generalisation ability for classifying settlements of aerial images, when compared to its counterpart. From this research, we can conclude that the extended LBP’s additional contrast features can improve overall settlement type classification accuracy and generalisation ability

Novel neural network-based algorithms for urban classification and change detection from satellite imagery

L`attività umana sta cambiando radicalmente l`ecosistema ambientale, unito anche alla rapida espansione demografica dei sistemi urbani. Benche` queste aree rappresentano solo una minima frazione della Terra, il loro impatto sulla richiesta di energia, cibo, acqua e materiali primi, e` enorme. Per cui, una informazione accurata e tempestiva risulta essere essenziale per gli enti di protezione civile in caso, ad esempio, di catastrofi ambientali. Negli ultimi anni il forte sviluppo di sistemi satellitari, sia dal punto di vista della risoluzione spaziale che di quella radiometrica e temporale, ha permesso una sempre piu` accurato monitoraggio della Terra, sia con sistemi ottici che con quelli RADAR. Ad ogni modo, una piu` alta risoluzione (sia spaziale, che spettrale o temporale) presenta tanti vantaggi e miglioramenti quanti svantaggi e limitazioni. In questa tesi sono discussi in dettaglio i diversi aspetti e tecniche per la classificazione e monitoraggio dei cambiamenti di aree urbane, utilizzando sia sistemi ottici che RADAR. Particolare enfasi e` data alla teoria ed all`uso di reti neurali.Human activity dominates the Earth's ecosystems with structural modifications. The rapid population growth over recent decades and the concentration of this population in and around urban areas have significantly impacted the environment. Although urban areas represent a small fraction of the land surface, they affect large areas due to the magnitude of the associated energy, food, water, and raw material demands. Reliable information in populated areas is essential for urban planning and strategic decision making, such as civil protection departments in cases of emergency. Remote sensing is increasingly being used as a timely and cost-effective source of information in a wide number of applications, from environment monitoring to location-aware systems. However, mapping human settlements represents one of the most challenging areas for the remote sensing community due to its high spatial and spectral diversity. From the physical composition point of view, several different materials can be used for the same man-made element (for example, building roofs can be made of clay tiles, metal, asphalt, concrete, plastic, grass or stones). On the other hand, the same material can be used for different purposes (for example, concrete can be found in paved roads or building roofs). Moreover, urban areas are often made up of materials present in the surrounding region, making them indistinguishable from the natural or agricultural areas (examples can be unpaved roads and bare soil, clay tiles and bare soil, or parks and vegetated open spaces) [1]. During the last two decades, significant progress has been made in developing and launching satellites with instruments, in both the optical/infrared and microwave regions of the spectra, well suited for Earth observation with an increasingly finer spatial, spectral and temporal resolution. Fine spatial sensors with metric or sub-metric resolution allow the detection of small-scale objects, such as elements of residential housing, commercial buildings, transportation systems and utilities. Multi-spectral and hyper-spectral remote sensing systems provide additional discriminative features for classes that are spectrally similar, due to their higher spectral resolution. The temporal component, integrated with the spectral and spatial dimensions, provides essential information, for example on vegetation dynamics. Moreover, the delineation of temporal homogeneous patches reduces the effect of local spatial heterogeneity that often masks larger spatial patterns. Nevertheless, higher resolution (spatial, spectral or temporal) imagery comes with limits and challenges that equal the advantages and improvements, and this is valid for both optical and synthetic aperture radar data [2]. This thesis addresses the different aspects of mapping and change detection of human settlements, discussing the main issues related to the use of optical and synthetic aperture radar data. Novel approaches and techniques are proposed and critically discussed to cope with the challenges of urban areas, including data fusion, image information mining, and active learning. The chapters are subdivided into three main parts. Part I addresses the theoretical aspects of neural networks, including their different architectures, design, and training. The proposed neural networks-based algorithms, their applications to classification and change detection problems, and the experimental results are described in Part II and Part III

Science for Disaster Risk Reduction

This thematic report describes JRC's activities in support to disaster management. The JRC develops tools and methodologies to help in all phases of disaster management, from preparedness and risk assessment to recovery and reconstruction through to forecasting and early warning.JRC.A.6-Communicatio

Humans on Earth: Global extents of anthropogenic land cover from remote sensing

This review provides a perspective of the current state of the art in remote sensing of anthropogenic land cover and human-modified landscapes at global scales. The fact that humans have adapted to almost all of Earth’s environments, yet remain strongly clustered within each of these environments influences both the nature of anthropogenic impact on Earth’s landscapes and the challenges of mapping it. Remote sensing provides a consistent synoptic view of these environments by mapping the land cover associated with the anthropogenic land uses of settlement and food production, as well as their complement in forest cover. We give brief descriptions and illustrative comparisons of several current land cover products representing the global extents of settlements, agriculture and forests derived from remote sensing. To accommodate the challenges inherent to mapping any land cover at widely varying scales, we compare size distributions of spatially contiguous land cover (rather than total area) for several global land cover products. Despite the use of different sensors and different mapping criteria, there is remarkable consistency in the size distributions of these products – both within and across land cover class. Rank-size distributions of settlements, agricultural areas and forests are all well-described by power laws spanning more than four orders of magnitude in both area and number. This consistency in the form of the distributions suggests fundamental similarities among different types of land cover. The observed similarities can be explained by depicting land cover mosaics as co-evolving spatial networks sharing common processes of nucleation, growth and connection

Earth resources: A continuing bibliography with indexes (issue 59)

This bibliography lists 518 reports, articles, and other documents introduced into the NASA scientific and technical information system between July 1 and September 30, 1988. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, oceanography and marine resources, hydrology and water management, data processing and distribution systems, and instrumentation and sensors

Earth resources: A continuing bibliography with indexes (issue 61)

This bibliography lists 606 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1 and March 31, 1989. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, oceanography and marine resources, hydrology and water management, data processing and distribution systems, and instrumentation and sensors, and economic analysis

Earth resources: A continuing bibliography with indexes, issue 50

This bibliography lists 523 reports, articles and other documents introduced into the NASA scientific and technical information system between April 1 and June 30, 1986. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economic analysis

Calibration of DART Radiative Transfer Model with Satellite Images for Simulating Albedo and Thermal Irradiance Images and 3D Radiative Budget of Urban Environment

Remote sensing is increasingly used for managing urban environment. In this context, the H2020 project URBANFLUXES aims to improve our knowledge on urban anthropogenic heat fluxes, with the specific study of three cities: London, Basel and Heraklion. Usually, one expects to derive directly 2 major urban parameters from remote sensing: the albedo and thermal irradiance. However, the determination of these two parameters is seriously hampered by complexity of urban architecture. For example, urban reflectance and brightness temperature are far from isotropic and are spatially heterogeneous. Hence, radiative transfer models that consider the complexity of urban architecture when simulating remote sensing signals are essential tools. Even for these sophisticated models, there is a major constraint for an operational use of remote sensing: the complex 3D distribution of optical properties and temperatures in urban environments. Here, the work is conducted with the DART (Discrete Anisotropic Radiative Transfer) model. It is a comprehensive physically based 3D radiative transfer model that simulates optical signals at the entrance of imaging spectro-radiometers and LiDAR scanners on board of satellites and airplanes, as well as the 3D radiative budget, of urban and natural landscapes for any experimental (atmosphere, topography,…) and instrumental (sensor altitude, spatial resolution, UV to thermal infrared,…) configuration. Paul Sabatier University distributes free licenses for research activities. This paper presents the calibration of DART model with high spatial resolution satellite images (Landsat 8, Sentinel 2, etc.) that are acquired in the visible (VIS) / near infrared (NIR) domain and in the thermal infrared (TIR) domain. Here, the work is conducted with an atmospherically corrected Landsat 8 image and Bale city, with its urban database. The calibration approach in the VIS/IR domain encompasses 5 steps for computing the 2D distribution (image) of urban albedo at satellite spatial resolution. (1) DART simulation of satellite image at very high spatial resolution (e.g., 50cm) per satellite spectral band. Atmosphere conditions are specific to the satellite image acquisition. (2) Spatial resampling of DART image at the coarser spatial resolution of the available satellite image, per spectral band. (3) Iterative derivation of the urban surfaces (roofs, walls, streets, vegetation,…) optical properties as derived from pixel-wise comparison of DART and satellite images, independently per spectral band. (4) Computation of the band albedo image of the city, per spectral band. (5) Computation of the image of the city albedo and VIS/NIR exitance, as an integral over all satellite spectral bands. In order to get a time series of albedo and VIS/NIR exitance, even in the absence of satellite images, ECMWF information about local irradiance and atmosphere conditions are used. A similar approach is used for calculating the city thermal exitance using satellite images acquired in the thermal infrared domain. Finally, DART simulations that are conducted with the optical properties derived from remote sensing images give also the 3D radiative budget of the city at any date including the date of the satellite image acquisition