Statistical static timing analysis considering the impact of power supply noise in VLSI circuits

As semiconductor technology is scaled and voltage level is reduced, the impact of the variation in power supply has become very significant in predicting the realistic worst-case delays in integrated circuits. The analysis of power supply noise is inevitable because high correlations exist between supply voltage and delay. Supply noise analysis has often used a vector-based timing analysis approach. Finding a set of test vectors in vector-based approaches, however, is very expensive, particularly during the design phase, and becomes intractable for larger circuits in DSM technology. In this work, two novel vectorless approaches are described such that increases in circuit delay, because of power supply noise, can be efficiently, quickly estimated. Experimental results on ISCAS89 circuits reveal the accuracy and efficiency of my approaches: in s38417 benchmark circuits, errors on circuit delay distributions are less than 2%, and both of my approaches are 67 times faster than the traditional vector-based approach. Also, the results show the importance of considering care-bits, which sensitize the longest paths during the power supply noise analysis

High Quality Test Generation Targeting Power Supply Noise

Delay test is an essential structural manufacturing test used to determine the maximal frequency at which a chip can run without incurring any functional failures. The central unsolved challenge is achieving high delay correlation with the functional test, which is dominated by power supply noise (PSN). Differences in PSN between functional and structural tests can lead to differences in chip operating frequencies of 30% or more. Pseudo functional test (PFT), based on a multiple-cycle clocking scheme, has better PSN correlation with functional test compared with traditional two-cycle at-speed test. However, PFT is vulnerable to under-testing when applied to delay test. This work aims to generate high quality PFT patterns, achieving high PSN correlation with functional test. First, a simulation-based don’t-care filling algorithm, Bit-Flip, is proposed to improve the PSN for PFT. It relies on randomly flipping a group of bits in the test pattern to explore the search space and find patterns that stress the circuits with the worst-case, but close to functional PSN. Experimental results on un-compacted patterns show Bit-Flip is able to improve PSN as much as 38.7% compared with the best random fill. Second, techniques are developed to improve the efficiency of Bit-Flip. A set of partial patterns, which sensitize transitions on critical cells, are pre-computed and later used to guide the selection of bits to flip. Combining random and deterministic flipping, we achieve similar PSN control as Bit-Flip but with much less simulation time. Third, we address the problem of automatic test pattern generation for extracting circuit timing sensitivity to power supply noise during post-silicon validation. A layout-aware path selection algorithm selects long paths to fully span the power delivery network. The selected patterns are intelligently filled to bring the PSN to a desired level. These patterns can be used to understand timing sensitivity in post-silicon validation by repeatedly applying the path delay test while sweeping the PSN experienced by the path from low to high. Finally, the impacts of compression on power supply noise control are studied. Illinois Scan and embedded deterministic test (EDT) patterns are generated. Then Bit-Flip is extended to incorporate the compression constraints and applied to compressible patterns. The experimental results show that EDT lowers the maximal PSN by 24.15% and Illinois Scan lowers it by 2.77% on un-compacted patterns

Power supply noise in delay testing

As technology scales into the Deep Sub-Micron (DSM) regime, circuit designs have become more and more sensitive to power supply noise. Excessive noise can significantly affect the timing performance of DSM designs and cause non-trivial additional delay. In delay test generation, test compaction and test fill techniques can produce excessive power supply noise. This will eventually result in delay test overkill. To reduce this overkill, we propose a low-cost pattern-dependent approach to analyze noise-induced delay variation for each delay test pattern applied to the design. Two noise models have been proposed to address array bond and wire bond power supply networks, and they are experimentally validated and compared. Delay model is then applied to calculate path delay under noise. This analysis approach can be integrated into static test compaction or test fill tools to control supply noise level of delay tests. We also propose an algorithm to predict transition count of a circuit, which can be applied to control switching activity during dynamic compaction. Experiments have been performed on ISCAS89 benchmark circuits. Results show that compacted delay test patterns generated by our compaction tool can meet a moderate noise or delay constraint with only a small increase in compacted test set size. Take the benchmark circuit s38417 for example: a 10% delay increase constraint only results in 1.6% increase in compacted test set size in our experiments. In addition, different test fill techniques have a significant impact on path delay. In our work, a test fill tool with supply noise analysis has been developed to compare several test fill techniques, and results show that the test fill strategy significant affect switching activity, power supply noise and delay. For instance, patterns with minimum transition fill produce less noise-induced delay than random fill. Silicon results also show that test patterns filled in different ways can cause as much as 14% delay variation on target paths. In conclusion, we must take noise into consideration when delay test patterns are generated

Low Cost Power and Supply Noise Estimation and Control in Scan Testing of VLSI Circuits

Test power is an important issue in deep submicron semiconductor testing. Too much power supply noise and too much power dissipation can result in excessive temperature rise, both leading to overkill during delay test. Scan-based test has been widely adopted as one of the most commonly used VLSI testing method. The test power during scan testing comprises shift power and capture power. The power consumed in the shift cycle dominates the total power dissipation. It is crucial for IC manufacturing companies to achieve near constant power consumption for a given timing window in order to keep the chip under test (CUT) at a near constant temperature, to make it easy to characterize the circuit behavior and prevent delay test over kill. To achieve constant test power, first, we built a fast and accurate power model, which can estimate the shift power without logic simulation of the circuit. We also proposed an efficient and low power X-bit Filling process, which could potentially reduce both the shift power and capture power. Then, we introduced an efficient test pattern reordering algorithm, which achieves near constant power between groups of patterns. The number of patterns in a group is determined by the thermal constant of the chip. Experimental results show that our proposed power model has very good correlation. Our proposed X-Fill process achieved both minimum shift power and capture power. The algorithm supports multiple scan chains and can achieve constant power within different regions of the chip. The greedy test pattern reordering algorithm can reduce the power variation from 29-126 percent to 8-10 percent or even lower if we reduce the power variance threshold. Excessive noise can significantly affect the timing performance of Deep Sub-Micron (DSM) designs and cause non-trivial additional delay. In delay test generation, test compaction and test fill techniques can produce excessive power supply noise. This can result in delay test overkill. Prior approaches to power supply noise aware delay test compaction are too costly due to many logic simulations, and are limited to static compaction. We proposed a realistic low cost delay test compaction flow that guardbands the delay using a sequence of estimation metrics to keep the circuit under test supply noise more like functional mode. This flow has been implemented in both static compaction and dynamic compaction. We analyzed the relationship between delay and voltage drop, and the relationship between effective weighted switching activity (WSA) and voltage drop. Based on these correlations, we introduce the low cost delay test pattern compaction framework considering power supply noise. Experimental results on ISCAS89 circuits show that our low cost framework is up to ten times faster than the prior high cost framework. Simulation results also verify that the low cost model can correctly guardband every path‟s extra noise-induced delay. We discussed the rules to set different constraints in the levelized framework. The veto process used in the compaction can be also applied to other constraints, such as power and temperature

On-Chip Power Supply Noise: Scaling, Suppression and Detection

Design metrics such as area, timing and power are generally considered as the primary criteria in the design of modern day circuits, however, the minimization of power supply noise, among other noise sources, is appreciably more important since not only can it cause a degradation in these parameters but can cause entire chips to fail. Ensuring the integrity of the power supply voltage in the power distribution network of a chip is therefore crucial to both building reliable circuits as well as preventing circuit performance degradation. Power supply noise concerns, predicted over two decades ago, continue to draw significant attention, and with present CMOS technology projected to keep on scaling, it is shown in this work that these issues are not expected to diminish. This research also considers the management and on-chip detection of power supply noise. There are various methods of managing power supply noise, with the use of decoupling capacitors being the most common technique for suppressing the noise. An in-depth analysis of decap structures including scaling effects is presented in this work with corroborating silicon results. The applicability of various decaps for given design constraints is provided. It is shown that MOS-metal hybrid structures can provide a significant increase in capacitance per unit area compared to traditional structures and will continue to be an important structure as technology continues to scale. Noise suppression by means of current shifting within the clock period of an ALU block is further shown to be an additional method of reducing the minimum voltage observed on its associated supply. A simple, and area and power efficient technique for on-chip supply noise detection is also proposed