Robust Stabilised Visual Tracker for Vehicle Tracking

Visual tracking is performed in a stabilised video. If the input video to the tracker algorithm is itself destabilised, incorrect motion vectors will cause a serious drift in tracking. Therefore video stabilisation is must before tracking. A novel algorithm is developed which simultaneously takes care of video stabilisation and target tracking. Target templates in just previous frame are stored in positive and negative repositories followed by Affine mapping. Then optimised affine parameters are used to stabilise the video. Target of interest in the next frame is approximated using linear combinations of previous target templates. Proposed modified L1 minimisation method is used to solve sparse representation of target in the target template subspace. Occlusion problem is minimised using the inherent energy of coefficients. Accurate tracking results have been obtained in destabilised videos

Computer vision in target pursuit using a UAV

Research in target pursuit using Unmanned Aerial Vehicle (UAV) has gained attention in recent years, this is primarily due to decrease in cost and increase in demand of small UAVs in many sectors. In computer vision, target pursuit is a complex problem as it involves the solving of many sub-problems which are typically concerned with the detection, tracking and following of the object of interest. At present, the majority of related existing methods are developed using computer simulation with the assumption of ideal environmental factors, while the remaining few practical methods are mainly developed to track and follow simple objects that contain monochromatic colours with very little texture variances. Current research in this topic is lacking of practical vision based approaches. Thus the aim of this research is to fill the gap by developing a real-time algorithm capable of following a person continuously given only a photo input. As this research considers the whole procedure as an autonomous system, therefore the drone is activated automatically upon receiving a photo of a person through Wi-Fi. This means that the whole system can be triggered by simply emailing a single photo from any device anywhere. This is done by first implementing image fetching to automatically connect to WIFI, download the image and decode it. Then, human detection is performed to extract the template from the upper body of the person, the intended target is acquired using both human detection and template matching. Finally, target pursuit is achieved by tracking the template continuously while sending the motion commands to the drone. In the target pursuit system, the detection is mainly accomplished using a proposed human detection method that is capable of detecting, extracting and segmenting the human body figure robustly from the background without prior training. This involves detecting face, head and shoulder separately, mainly using gradient maps. While the tracking is mainly accomplished using a proposed generic and non-learning template matching method, this involves combining intensity template matching with colour histogram model and employing a three-tier system for template management. A flight controller is also developed, it supports three types of controls: keyboard, mouse and text messages. Furthermore, the drone is programmed with three different modes: standby, sentry and search. To improve the detection and tracking of colour objects, this research has also proposed several colour related methods. One of them is a colour model for colour detection which consists of three colour components: hue, purity and brightness. Hue represents the colour angle, purity represents the colourfulness and brightness represents intensity. It can be represented in three different geometric shapes: sphere, hemisphere and cylinder, each of these shapes also contains two variations. Experimental results have shown that the target pursuit algorithm is capable of identifying and following the target person robustly given only a photo input. This can be evidenced by the live tracking and mapping of the intended targets with different clothing in both indoor and outdoor environments. Additionally, the various methods developed in this research could enhance the performance of practical vision based applications especially in detecting and tracking of objects

Algorithms for the enhancement of dynamic range and colour constancy of digital images & video

One of the main objectives in digital imaging is to mimic the capabilities of the human eye, and perhaps, go beyond in certain aspects. However, the human visual system is so versatile, complex, and only partially understood that no up-to-date imaging technology has been able to accurately reproduce the capabilities of the it. The extraordinary capabilities of the human eye have become a crucial shortcoming in digital imaging, since digital photography, video recording, and computer vision applications have continued to demand more realistic and accurate imaging reproduction and analytic capabilities. Over decades, researchers have tried to solve the colour constancy problem, as well as extending the dynamic range of digital imaging devices by proposing a number of algorithms and instrumentation approaches. Nevertheless, no unique solution has been identified; this is partially due to the wide range of computer vision applications that require colour constancy and high dynamic range imaging, and the complexity of the human visual system to achieve effective colour constancy and dynamic range capabilities. The aim of the research presented in this thesis is to enhance the overall image quality within an image signal processor of digital cameras by achieving colour constancy and extending dynamic range capabilities. This is achieved by developing a set of advanced image-processing algorithms that are robust to a number of practical challenges and feasible to be implemented within an image signal processor used in consumer electronics imaging devises. The experiments conducted in this research show that the proposed algorithms supersede state-of-the-art methods in the fields of dynamic range and colour constancy. Moreover, this unique set of image processing algorithms show that if they are used within an image signal processor, they enable digital camera devices to mimic the human visual system s dynamic range and colour constancy capabilities; the ultimate goal of any state-of-the-art technique, or commercial imaging device

Intelligent optical methods in image analysis for human detection

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.This thesis introduces the concept of a person recognition system for use on an integrated autonomous surveillance camera. Developed to enable generic surveillance tasks without the need for complex setup procedures nor operator assistance, this is achieved through the novel use of a simple dynamic noise reduction and object detection algorithm requiring no previous knowledge of the installation environment and without any need to train the system to its installation. The combination of this initial processing stage with a novel hybrid neural network structure composed of a SOM mapper and an MLP classifier using a combination of common and individual input data lines has enabled the development of a reliable detection process, capable of dealing with both noisy environments and partial occlusion of valid targets. With a final correct classification rate of 94% on a single image analysis, this provides a huge step forwards as compared to the reported 97% failure rate of standard camera surveillance systems

Use of Coherent Point Drift in computer vision applications

This thesis presents the novel use of Coherent Point Drift in improving the robustness of a number of computer vision applications. CPD approach includes two methods for registering two images - rigid and non-rigid point set approaches which are based on the transformation model used. The key characteristic of a rigid transformation is that the distance between points is preserved, which means it can be used in the presence of translation, rotation, and scaling. Non-rigid transformations - or affine transforms - provide the opportunity of registering under non-uniform scaling and skew. The idea is to move one point set coherently to align with the second point set. The CPD method finds both the non-rigid transformation and the correspondence distance between two point sets at the same time without having to use a-priori declaration of the transformation model used. The first part of this thesis is focused on speaker identification in video conferencing. A real-time, audio-coupled video based approach is presented, which focuses more on the video analysis side, rather than the audio analysis that is known to be prone to errors. CPD is effectively utilised for lip movement detection and a temporal face detection approach is used to minimise false positives if face detection algorithm fails to perform. The second part of the thesis is focused on multi-exposure and multi-focus image fusion with compensation for camera shake. Scale Invariant Feature Transforms (SIFT) are first used to detect keypoints in images being fused. Subsequently this point set is reduced to remove outliers, using RANSAC (RANdom Sample Consensus) and finally the point sets are registered using CPD with non-rigid transformations. The registered images are then fused with a Contourlet based image fusion algorithm that makes use of a novel alpha blending and filtering technique to minimise artefacts. The thesis evaluates the performance of the algorithm in comparison to a number of state-of-the-art approaches, including the key commercial products available in the market at present, showing significantly improved subjective quality in the fused images. The final part of the thesis presents a novel approach to Vehicle Make & Model Recognition in CCTV video footage. CPD is used to effectively remove skew of vehicles detected as CCTV cameras are not specifically configured for the VMMR task and may capture vehicles at different approaching angles. A LESH (Local Energy Shape Histogram) feature based approach is used for vehicle make and model recognition with the novelty that temporal processing is used to improve reliability. A number of further algorithms are used to maximise the reliability of the final outcome. Experimental results are provided to prove that the proposed system demonstrates an accuracy in excess of 95% when tested on real CCTV footage with no prior camera calibration

A vision system for mobile maritime surveillance platforms

Mobile surveillance systems play an important role to minimise security and safety threats in high-risk or hazardous environments. Providing a mobile marine surveillance platform with situational awareness of its environment is important for mission success. An essential part of situational awareness is the ability to detect and subsequently track potential target objects.Typically, the exact type of target objects is unknown, hence detection is addressed as a problem of finding parts of an image that stand out in relation to their surrounding regions or are atypical to the domain. Contrary to existing saliency methods, this thesis proposes the use of a domain specific visual attention approach for detecting potential regions of interest in maritime imagery. For this, low-level features that are indicative of maritime targets are identified. These features are then evaluated with respect to their local, regional, and global significance. Together with a domain specific background segmentation technique, the features are combined in a Bayesian classifier to direct visual attention to potential target objects.The maritime environment introduces challenges to the camera system: gusts, wind, swell, or waves can cause the platform to move drastically and unpredictably. Pan-tilt-zoom cameras that are often utilised for surveillance tasks can adjusting their orientation to provide a stable view onto the target. However, in rough maritime environments this requires high-speed and precise inputs. In contrast, omnidirectional cameras provide a full spherical view, which allows the acquisition and tracking of multiple targets at the same time. However, the target itself only occupies a small fraction of the overall view. This thesis proposes a novel, target-centric approach for image stabilisation. A virtual camera is extracted from the omnidirectional view for each target and is adjusted based on the measurements of an inertial measurement unit and an image feature tracker. The combination of these two techniques in a probabilistic framework allows for stabilisation of rotational and translational ego-motion. Furthermore, it has the specific advantage of being robust to loosely calibrated and synchronised hardware since the fusion of tracking and stabilisation means that tracking uncertainty can be used to compensate for errors in calibration and synchronisation. This then completely eliminates the need for tedious calibration phases and the adverse effects of assembly slippage over time.Finally, this thesis combines the visual attention and omnidirectional stabilisation frameworks and proposes a multi view tracking system that is capable of detecting potential target objects in the maritime domain. Although the visual attention framework performed well on the benchmark datasets, the evaluation on real-world maritime imagery produced a high number of false positives. An investigation reveals that the problem is that benchmark data sets are unconsciously being influenced by human shot selection, which greatly simplifies the problem of visual attention. Despite the number of false positives, the tracking approach itself is robust even if a high number of false positives are tracked

Real-time analysis of video signals

Many practical and experimental systems employing image processing techniques have been built by other workers for various applications. Most of these systems are computer-based and very few operate in a real time environment. The objective of this work is to build a microprocessor-based system for video image processing. The system is used in conjunction with an on-line TV camera and processing is carried out in real time. The enormous storage requirement of digitized TV signals and the real time constraint suggest that some simplification of the data must take place prior to any viable processing. Data reduction is attained through the representation of objects by their edges, an approach often adopted for feature extraction in pattern recognition systems. A new technique for edge detection by applying comparison criteria to differentials at adjacent pixels of the video image is developed and implemented as a preprocessing hardware unit. A circuit for the generation of the co-ordinates of edge points is constructed to free the processing computer of this task, allowing it more time for on-line analysis of video signals. Besides the edge detector and co-ordinate generator the hardware built consists of a microprocessor system based on a Texas Instruments T.US 9900 device, a first-in-first-out buffer store and interface circuitry to a TV camera and display devices. All hardware modules and their power supplies are assembled in one unit to provide a standalone instrument. The problem chosen for investigation is analysis of motion in a visual scene. Aspects of motion studied concern the tracking of moving objects with simple geometric shapes and description of their motion. More emphasis is paid to the analysis of human eye movements and measurement of its point-of-regard which has many practical applications in the fields of physiology and psychology. This study provides a basis for the design of a processing unit attached to an oculometer to replace bulky minicomputer-based eye motion analysis systems. Programs are written for storage, analysis and display of results in real time