Chapter Development of Josephson voltage standards

Neurology & clinical neurophysiolog

Development of Josephson voltage standards

Neurology & clinical neurophysiolog

A Modular Multi-level Converter for Energy Management of Hybrid Energy-Storage Systems in Electric Vehicles

Electric vehicles (EVs) are substantial applications of clean energy. Their effectiveness for mainstream transportation is predicated on the efficient use of stored energy within the vehicles’ power pack. Among rechargeable storage solutions, lithium-ion (Li-ion) battery cells have high energy density making them suitable to supply the EVs’ average power. However, the peak power requirements of the vehicles exert stress on the Li-ion cells due to their low pulsating power capabilities. Ultracapacitors can be used instead as the power-pulsating storage elements given their superior power density. Incorporating the two cell types for energy storage signifies a hybrid configuration that leads to challenging tasks in managing the energy between cells due to varying cell dynamics. Therefore, this study investigated the design of an end-to-end hybrid energy-storage and management system. The limitations of existing power electronics and control schemes were identified based on comparative analysis, both on a cell level and on a system level. Subsequently, an energy system was developed that utilized modular multi-level converters to manage the energy between the different cell types. The formulated control strategy accounted for various power modes and added immense flexibility in charge sharing through diverse switching states. Furthermore, the proposed configuration eliminated the conventional need for a system level drive inverter feeding the EV motor. Electro-mechanical modeling results and physical design merits verified the proposed configuration’s effectiveness in improving EV efficiency

Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Fast Assessment of Dynamic Behavior Analysis with Evaluation of Minimum Synchronous Inertia to Improve Dynamic Security in Islanded Power Systems

Over the last decades, renewable energy sources (RES) participation into the electricity supply mix has been constantly increasing not only in interconnected power systems but also in isolated power systems. This power supply transition seeks to accomplish renewable-based electricity generation targets and policies as well as the de-carbonisation of societies for a more sustainable energy future. Such transition should be achieved through investments and consequent substantial installation of wind and solar farms in power systems, not only because of their obvious environmental benefits but also because of their technological maturity and consequent steady cost declining.Despite renewable energy penetration growth in several power grids, there are some technical challenges to deal with when we are in presence of isolated power systems with variable renewable energy sources. Those technical issues are identical to the ones faced by larger and interconnected systems but they could intensify in these less robust type of systems. Therefore, issues like frequency control and spinning reserve management become even more important to guarantee acceptable levels of stability and security of the system. Moreover, the increasing participation of wind and photovoltaics in the generation mix, unlike conventional generators, leads to a significant reduction in the amount of synchronous inertia present in the system, which is essential to avoid a rapid rate of change of frequency (RoCoF) and large frequency deviations after a contingency. Thus, higher RoCoF and frequency deviations will be observed, which might trigger the protection devices resulting in a cascading outage and a blackout.This thesis presents a preventive control tool capable of evaluate power system stability and identify the minimum synchronous inertia required to maintain system stable for a certain operation scenario (characterized by its dispatch and demand) and, if necessary, to support the decision maker to perform a new power dispatch or consider the activation of synchronous condensers.For that purpose, a small and isolated power system with a significant participation of RES in the generation mix was considered. By performing a power dispatch, several operation scenarios were created and used as input in a MATLAB/SIMULINK model, which was used to study the dynamic response of the system when a disturbance occur. In this work two different disturbances were considered: active power output loss by the biggest thermal unit in the system and the loss of 50\% in both wind and PV active power output. Therefore, a dataset was created to train two different neural networks (one for each contingency) so that they could emulate the dynamic response of the system. By applying a sensitivity analysis by the neural networks it is possible to identify the minimum synchronous inertia required by the system to keep it secure and stable

Unified Power Quality Conditioner for Grid Integration of Wind Generators

A Unified Power Quality Conditioner (UPQC) is relatively a new member of the custom power device family. It is a comprehensive custom power device, with integrated shunt and series active filters. The cost of the device, which is higher than other custom power/FACTS devices, because of twin inverter structure and control complexity, will have to be justified by exploring new areas of application where the cost of saving power quality events outweighs the initial cost of installation. Distributed generation (such as wind generation) is one field where the UPQC can find its potential application. There has been a considerable increase in the power generation from wind farms. This has created the necessity for wind farms connectivity with the grid during power system faults, voltage sags and frequency variations. The application of active filters/custom power devices in the field of wind generation to provide reactive power compensation, additional fault ride through capability and to maintain Power Quality (PQ) at the point of common coupling is gaining popularity. Wind generation like other forms of distributed generation often relies on power electronics technology for flexible interconnection to the power grid. The application of power electronics in wind generation has resulted in improved power quality and increased energy capture. The rapid development in power electronics, which has resulted in high kVA rating of the devices and low price per kVA, encourages the application of such devices at distribution level. This work focuses on development of a laboratory prototype of a UPQC, and investigation of its application for the flexible grid integration of fixed and variable speed wind generators through dynamic simulation studies. A DSP based fully digital controller and interfacing hardware has been developed for a 24 kVA (12 kVA-shunt compensator and 12 kVA-series compensator) laboratory prototype of UPQC. The modular control approach facilitates the operation of the device either as individual series or shunt compensator or as a UPQC. Different laboratory tests have been carried out to demonstrate the effectiveness of developed control schemes.A simulation-based analysis is carried out to investigate the suitability of application of a UPQC to achieve Irish grid code compliance of a 2 MW Fixed Speed Induction Generator (FSIG). The rating requirement of the UPQC for the wind generation application has been investigated. A general principle is proposed to choose the practical and economical rating of the UPQC for this type of application. A concept of UPQC integrated Wind Generator (UPQC-WG) has been proposed. The UPQC-WG is a doubly fed induction machine with converters integrated in the stator and rotor circuits and is capable of adjustable speed operation. The operation of UPQC-WG under sub and super-synchronous speed range has been demonstrated. The Irish grid code compliance of the same has been demonstrated with a detailed dynamic simulation

1. Helgoland Power and Energy Conference - 24. Dresdener Kreis 2023

Der Sammelband "1. Helgoland Power and Energy Conference" beinhaltet neben einem kurzen Bericht zum 24. Treffen des Dresdener Kreises 2023 wissenschaftliche Beiträge von Doktoranden der beteiligten Hochschulinstitute zum Thema Elektroenergieversorgung. Der Dresdener Kreis setzt sich aus der Professur für Elektroenergieversorgung der Technischen Universität Dresden, dem Fachgebiet Elektrische Anlagen und Netze der Universität Duisburg-Essen, dem Fachgebiet Elektrische Energieversorgung der Leibniz Universität Hannover und dem Lehrstuhl Elektrische Netze und Erneuerbare Energie der Otto-von-Guericke Universität Magdeburg zusammen und trifft sich einmal im Jahr zum fachlichen Austausch an einer der beteiligten Universitäten