Sparse complex FxLMS for active noise cancellation over spatial regions

In this paper, we investigate active noise control over large 2D spatial regions when the noise source is sparsely distributed. The l1 relaxation technique originated from compressive sensing is adopted and based on that we develop the algorithm for two cases: multipoint noise cancellation and wave domain noise cancellation. This results in two new variants (i) zero-attracting multi-point complex FxLMS and (ii) zero-attracting wave domain complex FxLMS. Both approaches use a feedback control system, where a microphone array is distributed over the boundary of the control region to measure the residual noise signals and a loudspeaker array is placed outside the microphone array to generate the anti-noise signals. Simulation results demonstrate the performance and advantages of the proposed methods in terms of convergence rate and spatial noise reduction levels.This work is supported by Australian Research Council (ARC) Discovery Projects funding scheme (project no. DP140103412). The work of J. Zhang was sponsored by the China Scholarship Council with the Australian National University

Mode Domain Spatial Active Noise Control Using Sparse Signal Representation

Active noise control (ANC) over a sizeable space requires a large number of reference and error microphones to satisfy the spatial Nyquist sampling criterion, which limits the feasibility of practical realization of such systems. This paper proposes a mode-domain feedforward ANC method to attenuate the noise field over a large space while reducing the number of microphones required. We adopt a sparse reference signal representation to precisely calculate the reference mode coefficients. The proposed system consists of circular reference and error microphone arrays, which capture the reference noise signal and residual error signal, respectively, and a circular loudspeaker array to drive the anti-noise signal. Experimental results indicate that above the spatial Nyquist frequency,our proposed method can perform well compared to a conventional methods. Moreover, the proposed method can even reduce the number of reference microphones while achieving better noise attenuation.Comment: to appear at ICASSP 201

Recent Technological Advances in Spatial Active Noise Control Systems

This article provides a broad overview of the recent advances in the field of active noise control techniques to reduce unwanted noise over a certain spatial region of interest. Thanks to commercial and technological advances in local active noise control systems extending the size of the quiet zone seems to be a crucial step to developing the next generation of active control systems for a more personalized and quieter audio product. In this review article, the advances over the past decade the in design and development of spatial active noise control techniques to enlarge the controlled sound zone is reviewed. The focus is specifically on the adaptive control techniques and the methods proposed in the frequency domain to control the sound field. The study has paid specific attention to the most important performance measures in designing a spatial active noise control system such as convergence rate, stability and robustness of the algorithm, the size of the quiet zone and how it can be enlarged by configuring the loudspeaker and microphone array geometries. Finally, the authors will discuss the current and future challenges that should be overcome to improve the effectiveness of the recently proposed methods to expand the silence zone

Evaluation of spatial active noise cancellation performance using spherical harmonic analysis

This paper presents a novel metric to evaluate the performance of spatial active noise cancellation (ANC) systems. We show that the acoustic potential energy within a spherical region can be expressed by a weighed squared sum of spherical harmonic coefficients. The proposed metric allows convenient evaluation of spatial ANC performance using a spherical microphone array. In order to evaluate the effectiveness of this metric, we set up a experimental ANC system and conducted a series narrow band and wide band ANC experiments, the results show that the proposed potential energy method provides a reliable characterization of the performance of spatial ANC systems.This work is supported by Australian Research Council (ARC) Discovery Projects funding scheme (project no. DP140103412)

Active Noise Control Over Space: A Wave Domain Approach

Noise control and cancellation over a spatial region is a fundamental problem in acoustic signal processing. In this paper, we utilize wave-domain adaptive algorithms to iteratively calculate the secondary source driving signals and to cancel the primary noise field over the control region. We propose wave-domain active noise control algorithms based on two minimization problems: first, minimizing the wave-domain residual signal coefficients, and second, minimizing the acoustic potential energy over the region, and derive the update equations with respect to two variables, the loudspeaker weights and wave-domain secondary source coefficients. Simulation results demonstrate the effectiveness of the proposed algorithms, more specifically the convergence speed and the noise cancellation performance in terms of the noise reduction level and acoustic potential energy reduction level over the entire spatial region.DP14010341

Spatial Noise-Field Control With Online Secondary Path Modeling: A Wave-Domain Approach

Due to strong interchannel interference in multichannel active noise control (ANC), there are fundamental problems associated with the filter adaptation and online secondary path modeling remains a major challenge. This paper proposes a wave-domain adaptation algorithm for multichannel ANC with online secondary path modelling to cancel tonal noise over an extended region of two-dimensional plane in a reverberant room. The design is based on exploiting the diagonal-dominance property of the secondary path in the wave domain. The proposed wave-domain secondary path model is applicable to both concentric and nonconcentric circular loudspeakers and microphone array placement, and is also robust against array positioning errors. Normalized least mean squares-type algorithms are adopted for adaptive feedback control. Computational complexity is analyzed and compared with the conventional time-domain and frequency-domain multichannel ANCs. Through simulation-based verification in comparison with existing methods, the proposed algorithm demonstrates more efficient adaptation with low-level auxiliary noise.DP14010341

Theory and Design of Feasible Active Noise Control Systems for 3D Regions

This thesis advances Active Noise Control (ANC) over three-dimensional (3D) space using feasible loudspeaker and microphone array systems. By definition, ANC reduces unwanted acoustic noise by generating an anti-noise signal(s) from secondary loudspeakers. The concept of spatial ANC aims to reduce unwanted acoustic noise over a continuous 3D region, by utilizing multiple microphones and multiple secondary loudspeakers to create a large-sized quiet zone for listeners in three-dimensional space. However, existing spatial ANC techniques are usually impractical and difficult to implement due to their strict hardware requirements and high computation complexity. Therefore, this thesis explores various aspects of spatial ANC, seeking algorithms and techniques to promote the reliability and feasibility of ANC over space in real-life applications. The spherical harmonic analysis technique is introduced as the basis of conventional spatial ANC systems. This technique provides an accurate representation of a given spatial sound field using higher-order microphone (spherical microphone array) recordings. Hence, the residual noise field in a spatial ANC system can be effectively captured spatially by applying the spherical harmonic technique. Incorporating conventional spatial ANC methods, we developed a series of algorithms and methods that optimize conventional methods regarding array geometries and ANC algorithms, towards improving the feasibility of a conventional spatial ANC system involving the spherical harmonic analysis. Overall, motivated by feasible and realistic designs for spatial ANC systems, work included in this thesis mainly solves the three problems of: (i) the impracticality of realizing spherical microphone and loudspeaker arrays, (ii) achieving secondary channel estimation with microphones remote from their desired locations, and (iii) unreasonable delays inherent to frequency domain spatial ANC methods. Based on our work, we have stepped towards achieving a spatial ANC system in a real-world environment for people to enjoy silence in the control region with the reliable usage of resources and algorithms. Several contributions of this work are: (i) designing a 3D spatial ANC system using multiple circular microphone and loudspeaker arrays instead of spherical arrays, (ii) proposing a 3D spatial ANC method with remote microphone technique such that noise reduction over a region is achieved with microphones remote from the region, (iii) proposing a secondary channel estimation method using a moving higher-order microphone such that usage of an error microphone array is not necessary, (iv) deriving a time domain spherical harmonic analysis method for open spherical microphone array recording with less delay than in the frequency domain, and (v) designing a feed-forward adaptive spatial ANC algorithm incorporating the time domain spherical harmonic analysis technique to better minimize the noise in the region of interest

Vocal fold vibratory and acoustic features in fatigued Karaoke singers

Session 3aMU - Musical Acoustics and Speech Communication: Singing Voice in Asian CulturesKaraoke is a popular singing entertainment particularly in Asia and is gaining more popularity in the rest of world. In Karaoke, an amateur singer sings with the background music and video (usually guided by the lyric captions on the video screen) played by Karaoke machine, using a microphone and an amplification system. As the Karaoke singers usually have no formal training, they may be more vulnerable to vocal fatigue as they may overuse and/or misuse their voices in the intensive and extensive singing activities. It is unclear whether vocal fatigue is accompanied by any vibration pattern or physiological changes of vocal folds. In this study, 20 participants aged from 18 to 23 years with normal voice were recruited to participate in an prolonged singing task, which induced vocal fatigue. High speed laryngscopic imaging and acoustic signals were recorded before and after the singing task. Images of /i/ phonation were quantitatively analyzed using the High Speed Video Processing (HSVP) program (Yiu, et al. 2010). It was found that the glottis became relatively narrower following fatigue, while the acoustic signals were not sensitive to measure change following fatigue. © 2012 Acoustical Society of Americapublished_or_final_versio

Theory and Design of Spatial Active Noise Control Systems

The concept of spatial active noise control is to use a number of loudspeakers to generate anti-noise sound waves, which would cancel the undesired acoustic noise over a spatial region. The acoustic noise hazards that exist in a variety of situations provide many potential applications for spatial ANC. However, using existing ANC techniques, it is difficult to achieve satisfying noise reduction for a spatial area, especially using a practical hardware setup. Therefore, this thesis explores various aspects of spatial ANC, and seeks to develop algorithms and techniques to promote the performance and feasibility of spatial ANC in real-life applications. We use the spherical harmonic analysis technique as the basis for our research in this work. This technique provides an accurate representation of the spatial noise field, and enables in-depth analysis of the characteristics of the noise field. Incorporating this technique into the design of spatial ANC systems, we developed a series of algorithms and methods that optimizes the spatial ANC systems, towards both improving noise reduction performance and reducing system complexity. Several contributions of this work are: (i) design of compact planar microphone array structures capable of recording 3D spatial sound fields, so that the noise field can be monitored with minimum physical intrusion to the quiet zone, (ii) derivation of a Direct-to-Reverberant Energy Ratio (DRR) estimation algorithm which can be used for evaluating reverberant characteristics of a noisy environment, (iii) propose a few methods to estimate and optimize spatial noise reduction of an ANC system, including a new metric for measuring spatial noise energy level, and (iv) design of an adaptive spatial ANC algorithm incorporating the spherical harmonic analysis technique. The combination of these contributions enables the design of compact, high performing spatial ANC systems for various applications