2,969 research outputs found

    Doktrin pengasingan kuasa : falsafah, praktis dan kerelatifan di Malaysia

    Get PDF
    Penulisan ini membincangkan tentang doktrin pengasingan kuasa berdasarkan kerangka teori institusionalisme. Doktrin ini dipraktiskan dalam trias politica atau politik tiga serangkai iaitu badan legislatif, eksekutif dan kehakiman. Falsafah dan praktis doktrin pengasingan kuasa ini adalah ditekankan bagi sesebuah negara bercorak demokrasi untuk mempamerkan wujudnya pengasingan kuasa serta autonomi bidangan di antara ketigatiga badan kerajaan. Hal ini penting untuk disoroti kerana Malaysia tidak terkecuali daripada mengamalkan sistem demokrasi dan pada masa yang sama mempraktiskan doktrin pengasingan kuasa dalam kerajaan federalisme berlapisnya sebagai satu pegangan fundamental. Akauntabiliti untuk menzahirkan doktrin pengasingan kuasa ini merupakan perkara yang penting memandangkan ia telah dimaktubkan dalam Perlembagaan Persekutuan

    Evolution of microgrids with converter-interfaced generations: Challenges and opportunities

    Full text link
    © 2019 Elsevier Ltd Although microgrids facilitate the increased penetration of distributed generations (DGs) and improve the security of power supplies, they have some issues that need to be better understood and addressed before realising the full potential of microgrids. This paper presents a comprehensive list of challenges and opportunities supported by a literature review on the evolution of converter-based microgrids. The discussion in this paper presented with a view to establishing microgrids as distinct from the existing distribution systems. This is accomplished by, firstly, describing the challenges and benefits of using DG units in a distribution network and then those of microgrid ones. Also, the definitions, classifications and characteristics of microgrids are summarised to provide a sound basis for novice researchers to undertake ongoing research on microgrids

    Modeling and Controlling a Hybrid Multi-Agent based Microgrid in Presence of Different Physical and Cyber Components

    Get PDF
    This dissertation starts with modeling of two different and important parts of the distribution power systems, i.e. distribution line and photovoltaic (PV) systems. Firstly, it studies different approximation methods and develops a new approach for simplification of Carson\u27s equations to model distribution lines for unbalanced power flow and short circuit analysis. The results of applying the proposed method on a three-phase unbalanced distribution system are compared with different existing methods as well as actual impedance values obtained from numerical integration method. Then steady state modeling and optimal placing of multiple PV system are investigated in order to reduce the total loss in the system. The results show the effectiveness of the proposed method in minimizing the total loss in a distribution power system.;The dissertation starts the discussion about microgrid modeling and control by implementing a novel frequency control approach in a microgrid. This study has been carried out step by step by modeling different part of the power system and proposing different algorithms. Firstly, the application of Renewable Energy Sources (RES) accompanied with Energy Storage Systems (ESS) in a hybrid system is studied in the presence of Distributed Generation (DG) resources in Load Frequency Control (LFC) problem of microgrid power system with significant penetration of wind speed disturbances. The next step is to investigate the effect of PHEVs in modelling and controlling the microgid. Therefore, system with different penetrations of PHEVs and different stochastic behaviors of PHEVs is modeled. Different kinds of control approaches, including PI control as conventional method and proposed optimal LQR and dynamic programming methods, have been utilized and the results have been compared with each other. Then, Multi Agent System (MAS) is utilized as a control solution which contributes the cyber aspects of microgrid system. The modeled microgrid along with dynamic models of different components is implemented in a centralized multi-agent based structure. The robustness of the proposed controller has been tested against different frequency changes including cyber attack implications with different timing and severity. New attack detection through learning method is also proposed and tested. The results show improvement in frequency response of the microgrid system using the proposed control method and defense strategy against cyber attacks.;Finally, a new multi-agent based control method along with an advanced secondary voltage and frequency control using Particle Swarm Optimization (PSO) and Adaptive Dynamic Programming (ADP) is proposed and tested in the modeled microgrid considering nonlinear heterogeneous dynamic models of DGs. The results are shown and compared with conventional control approaches and different multi-agent structures. It is observed that the results are improved by using the new multi-agent structure and secondary control method.;In summary, contributions of this dissertation center in three main topics. Firstly, new accurate methods for modeling the distribution line impedance and PV system is developed. Then advanced control and defense strategy method for frequency regulation against cyber intrusions and load changes in a microgrid is proposed. Finally, a new hierarchical multi-agent based control algorithm is designed for secondary voltage and frequency control of the microgrid. (Abstract shortened by ProQuest.)

    Control and Stability of Residential Microgrid with Grid-Forming Prosumers

    Get PDF
    The rise of the prosumers (producers-consumers), residential customers equipped with behind-the-meter distributed energy resources (DER), such as battery storage and rooftop solar PV, offers an opportunity to use prosumer-owned DER innovatively. The thesis rests on the premise that prosumers equipped with grid-forming inverters can not only provide inertia to improve the frequency performance of the bulk grid but also support islanded operation of residential microgrids (low-voltage distribution feeder operated in an islanded mode), which can improve distribution grids’ resilience and reliability without purposely designing low-voltage (LV) distribution feeders as microgrids. Today, grid-following control is predominantly used to control prosumer DER, by which the prosumers behave as controlled current sources. These grid-following prosumers deliver active and reactive power by staying synchronized with the existing grid. However, they cannot operate if disconnected from the main grid due to the lack of voltage reference. This gives rise to the increasing interest in the use of grid-forming power converters, by which the prosumers behave as voltage sources. Grid-forming converters regulate their output voltage according to the reference of their own and exhibit load sharing with other prosumers even in islanded operation. Making use of grid-forming prosumers opens up opportunities to improve distribution grids’ resilience and enhance the genuine inertia of highly renewable-penetrated power systems. Firstly, electricity networks in many regional communities are prone to frequent power outages. Instead of purposely designing the community as a microgrid with dedicated grid-forming equipment, the LV feeder can be turned into a residential microgrid with multiple paralleled grid-forming prosumers. In this case, the LV feeder can operate in both grid-connected and islanded modes. Secondly, gridforming prosumers in the residential microgrid behave as voltage sources that respond naturally to the varying loads in the system. This is much like synchronous machines extracting kinetic energy from rotating masses. “Genuine” system inertia is thus enhanced, which is fundamentally different from the “emulated” inertia by fast frequency response (FFR) from grid-following converters. Against this backdrop, this thesis mainly focuses on two aspects. The first is the small-signal stability of such residential microgrids. In particular, the impact of the increasing number of grid-forming prosumers is studied based on the linearised model. The impact of the various dynamic response of primary sources is also investigated. The second is the control of the grid-forming prosumers aiming to provide sufficient inertia for the system. The control is focused on both the inverters and the DC-stage converters. Specifically, the thesis proposes an advanced controller for the DC-stage converters based on active disturbance rejection control (ADRC), which observes and rejects the “total disturbance” of the system, thereby enhancing the inertial response provided by prosumer DER. In addition, to make better use of the energy from prosumer-owned DER, an adaptive droop controller based on a piecewise power function is proposed, which ensures that residential ESS provide little power in the steady state while supplying sufficient power to cater for the demand variation during the transient state. Proposed strategies are verified by time-domain simulations

    Improvement of Transient Stability of Photovoltaic-hydro Microgrids Using Virtual Synchronous Machines

    Get PDF
    Photovoltaic-hydro microgrids can provide reliable clean energy in remote areas that do not have an electric grid. Higher photovoltaic penetration can cause large frequency deviations at a high rate of change of frequency in the system. Virtual synchronous machines have been used to enhance performance of a diesel hybrid minigrid but no studies have been performed to account for dynamics of a hydro system. A method is needed to improve the transient stability of photovoltaic-hydro microgrid systems while allowing high photovoltaic penetration. The objective of this thesis was to study the feasibility of using virtual synchronous machines to improve transient stability of photovoltaic-hydro microgrid systems. A virtual synchronous machine is a short term energy storage device with power electronics and a dispatching algorithm that provides inertia to the grid. Transient analysis of a 25 kWp-39 kW photovoltaic–hydro benchmark system was performed using a MATLAB\Simulink simulation with and without the virtual synchronous machine. The virtual synchronous machine was modeled using directquadrature axis based current control techniques, and software in the loop simulations were performed in Opal-RT real time digital simulator. Large frequency deviations and rate of change of frequency were observed when the virtual synchronous machine was not included. When the virtual synchronous machine was used, frequency deviations and the rate of change of frequency were reduced to within limits. The energy use was minimal and comparable to small lead acid or NiMH batteries. Hence, virtual synchronous machines can improve the transient stability of photovoltaic-hydro systems while allowing high photovoltaic penetration

    Stability of microgrids and weak grids with high penetration of variable renewable energy

    Get PDF
    Autonomous microgrids and weak grids with high penetrations of variable renewable energy (VRE) generation tend to share several common characteristics: i) low synchronous inertia, ii) sensitivity to active power imbalances, and iii) low system strength (as defined by the nodal short circuit ratio). As a result of these characteristics, there is a greater risk of system instability relative to larger grids, especially as the share of VRE is increased. This thesis focuses on the development of techniques and strategies to assess and improve the stability of microgrids and weak grids. In the first part of this thesis, the small-signal stability of inertia-less converter dominated microgrids is analysed, wherein a load flow based method for small-signal model initialisation is proposed and used to examine the effects of topology and network parameters on the stability of the microgrid. The use of a back-to-back dc link to interconnect neighbouring microgrids and provide dynamic frequency support is then proposed to improve frequency stability by helping to alleviate active power imbalances. In the third part of this thesis, a new technique to determine the optimal sizing of smoothing batteries in microgrids is proposed. The technique is based on the temporal variability of the solar irradiance at the specific site location in order to maximise PV penetration without causing grid instability. A technical framework for integrating solar PV plants into weak grids is then proposed, addressing the weaknesses in conventional Grid Codes that fail to consider the unique characteristics of weak grids. Finally, a new technique is proposed for estimating system load relief factors that are used in aggregate single frequency stability models
    corecore