325 research outputs found
3G migration in Pakistan
The telecommunication industry in Pakistan has come a long way since the country\u27s independence in 1947. The initial era could be fairly termed as the PTCL (Pakistan Telecommunication Company Limited) monopoly, for it was the sole provider of all telecommunication services across the country. It was not until four decades later that the region embarked into the new world of wireless communication, hence ending the decades old PTCL monopoly. By the end of the late 1990\u27s, government support and international investment in the region opened new doors to innovation and better quality, low cost, healthy competition. Wireless licenses for the private sector in the telecommunication industry triggered a promising chain of events that resulted in a drastic change in the telecommunication infrastructure and service profile. The newly introduced wireless (GSM) technology received enormous support from all stakeholders (consumers, regulatory body, and market) and caused a vital boost in Pakistan\u27s economy. Numerous tangential elements had triggered this vital move in the history of telecommunications in Pakistan. Entrepreneurs intended to test the idea of global joint ventures in the East and hence the idea of international business became a reality. The technology had proven to be a great success in the West, while Pakistan\u27s telecom consumer had lived under the shadow of PTCL dominance for decades and needed more flexibility. At last the world was moving from wired to wireless! Analysts termed this move as the beginning of a new era. The investors, telecommunication businesses, and Pakistani treasury prospered. It was a win-win situation for all involved. The learning curve was steep for both operators and consumers but certainly improved over time. In essence, the principle of deploying the right technology in the right market at the right time led to this remarkable success. The industry today stands on the brink of a similar crossroads via transition from second generation to something beyond. With the partial success of 3G in Europe and the USA, the government has announced the release of three 3G licenses by mid 2009. This decision is not yet fully supported by all but still initiated parallel efforts by the operators and the vendors to integrate this next move into their existing infrastructure
Power control for WCDMA
This project tries to introduce itself in the physical implementations that make
possible the denominated third generation mobile technology. As well as to
know the technology kind that makes possible, for example, a video-call in real
time.
During this project, the different phases passed from the election of WCDMA
like the access method for UMTS will appear. Its coexistence with previous
network GSM will be analyzed, where the compatibility between systems has
been one of the most important aspects in the development of WCDMA, the
involved standardization organisms in the process, as well as the different
protocols that make the mobile communications within a network UTRAN
possible. Special emphasis during the study of the great contribution that has
offered WCDMA with respect to the control of power of the existing signals will
be made.
The future lines that are considered in the present, and other comment that
already are in their last phase of development in the field of the mobile
technology.
UMTS through WCDMA can be summarized like a revolution of the air
interface accompanied by a revolution in the network of their architecture
Performance analysis of low earth orbit (LEO) satellite link in the presence of elevation angle, fading and shadowing
This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Computer Science and Engineering, 2009.Cataloged from PDF version of thesis report.Includes bibliographical references (page 65).Tanjila FarahPrianka RoyB. Computer Science and Engineerin
Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks
Conventional cellular wireless networks were designed with the purpose of
providing high throughput for the user and high capacity for the service
provider, without any provisions of energy efficiency. As a result, these
networks have an enormous Carbon footprint. In this paper, we describe the
sources of the inefficiencies in such networks. First we present results of the
studies on how much Carbon footprint such networks generate. We also discuss
how much more mobile traffic is expected to increase so that this Carbon
footprint will even increase tremendously more. We then discuss specific
sources of inefficiency and potential sources of improvement at the physical
layer as well as at higher layers of the communication protocol hierarchy. In
particular, considering that most of the energy inefficiency in cellular
wireless networks is at the base stations, we discuss multi-tier networks and
point to the potential of exploiting mobility patterns in order to use base
station energy judiciously. We then investigate potential methods to reduce
this inefficiency and quantify their individual contributions. By a
consideration of the combination of all potential gains, we conclude that an
improvement in energy consumption in cellular wireless networks by two orders
of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843
Indoor Radio Measurement and Planning for UMTS/HSPDA with Antennas
Over the last decade, mobile communication networks have evolved tremendously with a key focus on providing high speed data services in addition to voice. The third generation of mobile networks in the form of Universal Mobile Telecommunications System (UMTS) is already offering revolutionary mobile broadband experience to its users by deploying High Speed Downlink Packet Access (HSDPA) as its packet-data technology. With data speeds up to 14.4 Mbps and ubiquitous mobility, HSDPA is anticipated to become a preferred broadband access medium for end-users via mobile phones, laptops etc. While majority of these end-users are located indoors most of the time, approximately 70-80% of the HSDPA traffic is estimated to originate from inside buildings. Thus for network operators, indoor coverage has become a necessity for technical and business reasons.
Macro-cellular (outdoor) to indoor coverage is a natural inexpensive way of providing network coverage inside the buildings. However, it does not guarantee sufficient link quality required for optimal HSDPA operation. On the contrary, deploying a dedicated indoor system may be far too expensive from an operator\u27s point of view. In this thesis, the concept is laid for the understanding of indoor radio wave propagation in a campus building environment which could be used to plan and improve outdoor-to-indoor UMTS/HSDPA radio propagation performance. It will be shown that indoor range performance depends not only on the transmit power of an indoor antenna, but also on the product\u27s response to multipath and obstructions in the environment along the radio propagation path.
An extensive measurement campaign will be executed in different indoor environments analogous to easy, medium and hard radio conditions. The effects of walls, ceilings, doors and other obstacles on measurement results would be observed.
Chapter one gives a brief introduction to the evolution of UMTS and HSDPA. It goes on to talk about radio wave propagation and some important properties of antennas which must be considered when choosing an antenna for indoor radio propagation. The challenges of in-building network coverage and also the objectives of this thesis are also mentioned in this chapter.
The evolution and standardization, network architecture, radio features and most importantly, the radio resource management features of UMTS/HSDPA are given in chapter two. In this chapter, the reason why Wideband Code Division Multiple Access (WCDMA) was specified and selected for 3G (UMTS) systems would be seen. The architecture of the radio access network, interfaces with the radio access network between base stations and radio network controllers (RNC), and the interface between the radio access network and the core network are also described in this chapter. The main features of HSDPA are mentioned at the end of the chapter.
In chapter three the principles of the WCDMA air interface, including spreading, Rake reception, signal fading, power control and handovers are introduced. The different types and characteristics of the propagation environments and how they influence radio wave propagation are mentioned. UMTS transport, logical and physical channels are also mentioned, highlighting their significance and relationship in and with the network.
Radio network planning for UMTS is discussed in chapter four. The outdoor planning process which includes dimensioning, detailed planning, optimization and monitoring is outlined. Indoor radio planning with distributed antenna systems (DAS), which is the idea and motivation behind this thesis work, is also discussed.
The various antennas considered and the antenna that was selected for this thesis experiment was discussed in chapter five. The antenna radiation pattern, directivity, gain and input impedance were the properties of the antenna that were taken into consideration. The importance of the choice of the antenna for any particular type of indoor environment is also mentioned.
In chapter six, the design and fabrication of the monopole antennas used for the experimental measurement is mentioned. The procedure for measurement and the equipment used are also discussed. The results gotten from the experiment are finally analyzed and discussed. In this chapter the effect of walls, floors, doors, ceilings and other obstacles on radio wave propagation will be seen.
Finally, chapter seven concludes this thesis work and gives some directions for future work
Recommended from our members
Performance measurements and analysis of the existing wireless communication technology in Iraq.
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityIraq may be considered as the largest wireless market in the Gulf region. A key driving factor in the market of wireless communication, it has seen enormous growth in the mobile phone market over the last five years leading to almost 24 million subscribers in 2011. Moreover, there are several technologies and services working in Iraq; three GSM Operators, three CDMA national operators and three CDMA provinces operators. The recent growth in the mobile phone market is based on the Global System for Mobile (GSM) communications and Code Division Multiple Access (CDMA) standards creating the next-generation wireless technologies in the Iraqi Wireless Communication market. One of the essential issues of this research is to investigate the performance of the decreased Quality Of Service (QoS) caused by interferences in the services on GSM/CDMA operators in Iraq. Many issues should be studied and taken into consideration, such as; does the Multi-Coalition Forces cause the interferences, jamming, higher rate of calls drop and false ringing; or are they caused by bad design and planning? Do we need to optimise our network due to the large number of users? All these factors are investigated and the measurements of most service providers and government agencies will be gathered. A detailed analysis was included from the providers with measurements of performance and the reasons for the deterioration of wireless services. The novel contributions of this thesis is the extensive radio measurement campaign over the three mobile an CDMA operator networks and the analysis and recommendations that were drawn to suggest the best approach to improve the QoS of Wireless communication technologies. Awareness of actual reasons behind the deterioration of services will be raised to the Iraqi Government, CMC and the wireless service providers
Final report on the evaluation of RRM/CRRM algorithms
Deliverable public del projecte EVERESTThis deliverable provides a definition and a complete evaluation of the RRM/CRRM algorithms selected in D11 and D15, and evolved and refined on an iterative process. The evaluation will be carried out by means of simulations using the simulators provided at D07, and D14.Preprin
Power control for WCDMA
This project tries to introduce itself in the physical implementations that make
possible the denominated third generation mobile technology. As well as to
know the technology kind that makes possible, for example, a video-call in real
time.
During this project, the different phases passed from the election of WCDMA
like the access method for UMTS will appear. Its coexistence with previous
network GSM will be analyzed, where the compatibility between systems has
been one of the most important aspects in the development of WCDMA, the
involved standardization organisms in the process, as well as the different
protocols that make the mobile communications within a network UTRAN
possible. Special emphasis during the study of the great contribution that has
offered WCDMA with respect to the control of power of the existing signals will
be made.
The future lines that are considered in the present, and other comment that
already are in their last phase of development in the field of the mobile
technology.
UMTS through WCDMA can be summarized like a revolution of the air
interface accompanied by a revolution in the network of their architecture
- …