Lagrangian relaxation-based multi-threaded discrete gate sizer

In integrated circuit design gate sizing is one of the key optimization techniques which is repeatedly invoked to trade-off delays for area and/or power of the gates during logic design and physical design stages. With increasing design sizes of a million gates and larger, discrete gate sizes and non-convex delay models the gate sizing algorithms that were designed for continuous sizes and convex delay models are slow and timing inaccurate. Of the several published discrete gate sizing algorithms, recent works have shown that Lagrangian relaxation based gate sizers have produced designs with the lowest power on average with high timing accuracy. But they are also very slow due to a large number of expensive timing updates spread across hundreds of iterations of solving the Lagrangian sub-problem. In this thesis we present a Lagrangian relaxation based multi-threaded discrete gate sizer for fast timing and power reduction by swapping the gate sizes and the threshold voltages. We developed two parallelization enabling techniques to reduce the runtime of Lagrangian sub-problem solver, namely, mutual exclusion edge (MEE) assignment and directed acyclic graph (DAG) based netlist traversal. MEEs are dummy edges assigned to reduce computational dependencies among gates sharing one or more common fan-ins. DAG based netlist traversal facilitates simultaneous resizing of gates belonging to different topological levels. We designed a Lagrange multiplier update framework that enables rapid convergence of the timing recovery and power recovery algorithms. To reduce the runtime of timing updates, we proposed a simple and fast-to-compute effective capacitance model and several mechanisms to calibrate the timing models to improve their accuracy. Compared to the state-of-the-art gate sizer, our proposed gate sizer is on average 15x faster and the optimized designs have only 1.7\% higher power. In digital synchronous designs simultaneous gate sizing and clock skew scheduling provides significantly more power saving. We extend the gate sizer to simultaneously schedule the clock skew. It can achieve an average of 18.8\% more reduction in power with only 20\% increase in the runtime

Concurrent optimization strategies for high-performance VLSI circuits

In the next generation of VLSI circuits, concurrent optimizations will be essential to achieve the performance challenges. In this dissertation, we present techniques for combining traditional timing optimization techniques to achieve a superior performance;The method of buffer insertion is used in timing optimization to either increase the driving power of a path in a circuit, or to isolate large capacitive loads that lie on noncritical or less critical paths. The procedure of transistor sizing selects the sizes of transistors within a circuit to achieve a given timing specification. Traditional design techniques perform these two optimizations as independent steps during synthesis, even though they are intimately linked and performing them in alternating steps is liable to lead to suboptimal solutions. The first part of this thesis presents a new approach for unifying transistor sizing with buffer insertion. Our algorithm achieve from 5% to 49% area reduction compared with the results of a standard transistor sizing algorithm;The next part of the thesis deals with the problem of collapsing gates for technology mapping. Two new techniques are proposed. The first method, the odd-level transistor replacement (OTR) method, performs technology mapping without the restriction of a fixed library size, and maps a circuit to a virtual library of complex static CMOS gates. The second technique, the Static CMOS/PTL method, uses a mix of static CMOS and pass transistor logic (PTL) to realize the circuit, using the relation between PTL and binary decision diagrams. The methods are very efficient and can handle all ISCAS\u2785 benchmark circuits in minutes. On average, it was found that the OTR method gave 40%, and the Static/PTL gave 50% delay reductions over SIS, with substantial area savings;Finally, we extend the technology mapping work to interleave it with placement in a single optimization. Conventional methods that perform these steps separately will not be adequate for next-generation circuits. Our approach presents an integrated solution to this problem, and shows an average of 28.19%, and a maximum of 78.42% improvement in the delay over a method that performs the two optimizations in separate steps

A Methodology for Cell Merging Circuit Transformation on Post-placement High Speed Design

This paper proposes a localize circuit transformation algorithm to further optimize the post-placement netlist in order to improve the overall timing of a design. The proposed algorithm reduces the total cell delay and net delay of timing violation paths by replacing a small group of cells (form up by two to three cells) that are placed close to each other with a functional equivalent standard cell available in the technology library. The algorithm has been implemented and applied to a number of optimized postplacement netlists which have went through conventional post-placement circuit transformation optimization processes such as gate relocation, cell re-sizing, repeater insertion and cell replication. The experimental results show that on average, this algorithm is able to further improve the timing of the optimized post-placement netlist by 27.75%, while keeping the design area increase by 0.2%

Enhancing Power Efficient Design Techniques in Deep Submicron Era

Excessive power dissipation has been one of the major bottlenecks for design and manufacture in the past couple of decades. Power efficient design has become more and more challenging when technology scales down to the deep submicron era that features the dominance of leakage, the manufacture variation, the on-chip temperature variation and higher reliability requirements, among others. Most of the computer aided design (CAD) tools and algorithms currently used in industry were developed in the pre deep submicron era and did not consider the new features explicitly and adequately. Recent research advances in deep submicron design, such as the mechanisms of leakage, the source and characterization of manufacture variation, the cause and models of on-chip temperature variation, provide us the opportunity to incorporate these important issues in power efficient design. We explore this opportunity in this dissertation by demonstrating that significant power reduction can be achieved with only minor modification to the existing CAD tools and algorithms. First, we consider peak current, which has become critical for circuit's reliability in deep submicron design. Traditional low power design techniques focus on the reduction of average power. We propose to reduce peak current while keeping the overhead on average power as small as possible. Second, dual Vt technique and gate sizing have been used simultaneously for leakage savings. However, this approach becomes less effective in deep submicron design. We propose to use the newly developed process-induced mechanical stress to enhance its performance. Finally, in deep submicron design, the impact of on-chip temperature variation on leakage and performance becomes more and more significant. We propose a temperature-aware dual Vt approach to alleviate hot spots and achieve further leakage reduction. We also consider this leakage-temperature dependency in the dynamic voltage scaling approach and discover that a commonly accepted result is incorrect for the current technology. We conduct extensive experiments with popular design benchmarks, using the latest industry CAD tools and design libraries. The results show that our proposed enhancements are promising in power saving and are practical to solve the low power design challenges in deep submicron era

A framework for fine-grain synthesis optimization of operational amplifiers

This thesis presents a cell-level framework for Operational Amplifiers Synthesis (OASYN) coupling both circuit design and layout. For circuit design, the tool applies a corner-driven optimization, accounting for on-chip performance variations. By exploring the process, voltage, and temperature variations space, the tool extracts design worst case solution. The tool undergoes sensitivity analysis along with Pareto-optimality to achieve required specifications. For layout phase, OASYN generates a DRC proved automated layout based on a sized circuit-level description. Morata et al. (1996) introduced an elegant representation of block placement called sequence pair for general floorplans (SP). Like TCG and BSG, but unlike O-tree, B*tree, and CBL, SP is P-admissible. Unlike SP, TCG supports incremental update during operation and keeps the information of the boundary modules as well as their relative positions in the representation. Block placement algorithms that are based on SP use heuristic optimization algorithms, e.g., simulated annealing where generation of large number of sequence pairs are required. Therefore a fast algorithm is needed to generate sequence pairs after each solution perturbation. The thesis presents a new simple and efficient O(n) runtime algorithm for fast realization of incremental update for cost evaluation. The algorithm integrates sequence pair and transitive closure graph advantages into TCG-S* a superior topology update scheme which facilitates the search for optimum desired floorplan. Experiments show that TCG-S* is better than existing works in terms of area utilization and convergence speed. Routing-aware placement is implemented in OASYN, handling symmetry constraints, e.g., interdigitization, common centroid, along with congestion elimination and the enhancement of placement routability

Physical design algorithms for asynchronous circuits

Asynchronous designs have been demonstrated to be able to achieve both higher performance and lower power compared with their synchronous counterparts. It provides a very promising solution to the emerging challenges in advanced technology. However, due to the lack of proper EDA tool support, the design cycle for asynchronous circuits is much longer compared with the one for synchronous circuits. Thus, even with many advantages, asynchronous circuits are still not the mainstream in the industry. In this thesis, we provides several algorithms to resolve the emerging issues for the physical design of asynchronous circuits. Our proposed algorithms optimize asynchronous circuits using placement, gate sizing, repeater insertion and pipeline buffer insertion techniques. An incremental maximum cycle ratio algorithm is also proposed to speed up the timing analysis of asynchronous circuits

Algorithms for VLSI Circuit Optimization and GPU-Based Parallelization

This research addresses some critical challenges in various problems of VLSI design automation, including sophisticated solution search on DAG topology, simultaneous multi-stage design optimization, optimization on multi-scenario and multi-core designs, and GPU-based parallel computing for runtime acceleration. Discrete optimization for VLSI design automation problems is often quite complex, due to the inconsistency and interference between solutions on reconvergent paths in directed acyclic graph (DAG). This research proposes a systematic solution search guided by a global view of the solution space. The key idea of the proposal is joint relaxation and restriction (JRR), which is similar in spirit to mathematical relaxation techniques, such as Lagrangian relaxation. Here, the relaxation and restriction together provides a global view, and iteratively improves the solution. Traditionally, circuit optimization is carried out in a sequence of separate optimization stages. The problem with sequential optimization is that the best solution in one stage may be worse for another. To overcome this difficulty, we take the approach of performing multiple optimization techniques simultaneously. By searching in the combined solution space of multiple optimization techniques, a broader view of the problem leads to the overall better optimization result. This research takes this approach on two problems, namely, simultaneous technology mapping and cell placement, and simultaneous gate sizing and threshold voltage assignment. Modern processors have multiple working modes, which trade off between power consumption and performance, or to maintain certain performance level in a powerefficient way. As a result, the design of a circuit needs to accommodate different scenarios, such as different supply voltage settings. This research deals with this multi-scenario optimization problem with Lagrangian relaxation technique. Multiple scenarios are taken care of simultaneously through the balance by Lagrangian multipliers. Similarly, multiple objective and constraints are simultaneously dealt with by Lagrangian relaxation. This research proposed a new method to calculate the subgradients of the Lagrangian function, and solve the Lagrangian dual problem more effectively. Multi-core architecture also poses new problems and challenges to design automation. For example, multiple cores on the same chip may have identical design in some part, while differ from each other in the rest. In the case of buffer insertion, the identical part have to be carefully optimized for all the cores with different environmental parameters. This problem has much higher complexity compared to buffer insertion on single cores. This research proposes an algorithm that optimizes the buffering solution for multiple cores simultaneously, based on critical component analysis. Under the intensifying time-to-market pressure, circuit optimization not only needs to find high quality solutions, but also has to come up with the result fast. Recent advance in general purpose graphics processing unit (GPGPU) technology provides massive parallel computing power. This research turns the complex computation task of circuit optimization into many subtasks processed by parallel threads. The proposed task partitioning and scheduling methods take advantage of the GPU computing power, achieve significant speedup without sacrifice on the solution quality

Circuit delay optimization by buffering the logic gates

Avec la miniaturisation actuelle, les circuits démontrent de plus en plus l'importance des délais d'interconnexion. Afin de réduire ce délai, l'insertion de tampons doit être effectuée durant la synthèse logique et la synthèse physique. Cette activité d'optimisation est souvent basée sur la programmation dynamique. Dans ce mémoire, la technique branch-and-bound est utilisé et le problème pour le cas spécifique d'arbres de tampons équilibrés est résolu, où toutes les charges ont un temps requis et une capacité identique. Une analyse mathématique est faite pour tenir compte d'une variété de questions de conception telles que la topologie, la bibliothèque de tampons et le changement de phase en présence d'inverseur. En combinant la programmation dynamique et les techniques branch-and-bound, une méthode hybride est présentée qui améliore le temps d'exécution tout en conservant une utilisation de mémoire raisonnable. Les concepts mathématiques et algorithmiques fondamentaux utilisés dans ce mémoire peuvent être employés pour généraliser la méthode proposée pour un ensemble de charges avec des capacités et des temps requis différents

Variability-Aware VLSI Design Automation For Nanoscale Technologies

As technology scaling enters the nanometer regime, design of large scale ICs gets more challenging due to shrinking feature sizes and increasing design complexity. Aggressive scaling causes significant degradation in reliability, increased susceptibility to fabrication and environmental randomness and increased dynamic and leakage power dissipation. In this work, we investigate these scaling issues in large scale integrated systems. This dissertation proposes to develop variability-aware design methodologies by proposing design analysis, design-time optimization, post-silicon tunability and runtime-adaptivity based optimization techniques for handling variability. We discuss our research in the area of variability-aware analysis, specifically focusing on the problem of statistical timing analysis. The first technique presents the concept of error budgeting that achieves significant runtime speedups during statistical timing analysis. The second work presents a general framework for non-linear non-Gaussian statistical timing analysis considering correlations. Further, we present our work on design-time optimization schemes that are applicable during physical synthesis. Firstly, we present a buffer insertion technique that considers wire-length uncertainty and proposes algorithms to perform probabilistic buffer insertion. Secondly, we present a stochastic optimization framework based on Monte-Carlo technique considering fabrication variability. This optimization framework can be applied to problems that can be modeled as linear programs without without imposing any assumptions on the nature of the variability. Subsequently, we present our work on post-silicon tunability based design optimization. This work presents a design management framework that can be used to balance the effort spent on pre-silicon (through gate sizing) and post-silicon optimization (through tunable clock-tree buffers) while maximizing the yield gains. Lastly, we present our work on variability-aware runtime optimization techniques. We look at the problem of runtime supply voltage scaling for dynamic power optimization, and propose a framework to consider the impact of variability on the reliability of such designs. We propose a probabilistic design synthesis technique where reliability of the design is a primary optimization metric