A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System

Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem. As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres. Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ). PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases. Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model

The cyber simulation terrain: Towards an open source cyber effects simulation ontology

Cyber resilience is characterised by an ability to understand and adapt to changing network conditions, including cyber attacks. Cyber resilience may be characterised by an effects-based approach to missions or processes. One of the fundamental preconditions underpinning cyber resilience is an accurate representation of current network and machine states and what missions they are supporting. This research outlines the need for an ontological network representation, drawing on existing literature and implementations in the domain. This work then introduces an open-source ontological representation for modelling cyber assets for the purposes of Computer Network Defence. This representation encompasses computers, network connectivity, users, software, vulnerabilities and exploits and aims for interoperability with related representations in common use. The utility of this work is highlighted against a functional use-case depicting a realistic operational network and mission. Finally, a future research direction is defined

Human behaviour modelling in complex socio-technical systems : an agent based approach

For many years we have been striving to understand human behaviour and our interactions with our socio-technological environment. By advancing our knowledge in this area, we have helped the design of new or improved work processes and technologies. Historically, much of the work in analysing social interactions has been conducted within the social sciences. However, computer simulation has brought an extra tool in trying to understand and model human behaviours. Using an agent based approach this presentation describes my work in constructing computational models of human behaviour for informing design through simulation. With examples from projects in two main application areas of crisis and emergency management, and energy management I describe how my work addresses some main issues in agent based social simulation. The first concerns the process by which we develop these models. The second lies in the nature of socio-technical systems. Human societies are a perfect example of a complex system exhibiting characteristics of self-organisation, adaptability and showing emergent phenomena such as cooperation and robustness. I describe how complex systems theory may be applied to improve our understanding of socio-technical systems, and how our micro level interactions lead to emergent mutual awareness for problem-solving. From agent based simulation systems I show how context awareness may be modelled. Looking forward to the future, I discuss how the increasing prevalence of artificial agents in our society will cause us to re-examine the new types of interactions and cooperative behaviours that will emerge.Depuis de nombreuses années, nous nous sommes efforcés de comprendre le comportement humain et nos interactions avec l'environnement sociotechnique. Grâce à l'avancée de nos connaissances dans ce domaine, nous avons contribué à la conception de technologies et de processus de travail nouveaux ou améliorés. Historiquement, une part importante du travail d'analyse des interactions sociales fut entreprise au sein des sciences sociales. Cependant, la simulation informatique a apporté un nouvel outil pour tenter de comprendre et de modéliser les comportements humains. En utilisant une approche à base d'agents, cette présentation décrit mon travail sur la construction de modèles informatiques du comportement humain pour guider la conception par la simulation. A l'aide d'exemples issus de projets des deux domaines d'application que sont la gestion des crises et de l'urgence et la gestion de l'énergie, je décris comment mon travail aborde certains problèmes centraux à la simulation sociale à base d'agents. Le premier concerne le processus par lequel nous développons ces modèles. Le second problème provient de la nature des systèmes sociotechniques. Les sociétés humaines constituent un exemple parfait de système complexe possédant des caractéristiques d'auto-organisation et d'adaptabilité, et affichant des phénomènes émergents tels que la coopération et la robustesse. Je décris comment la théorie des systèmes complexes peut être appliquée pour améliorer notre compréhension des systèmes sociotechniques, et comment nos interactions au niveau microscopique mènent à l'émergence d'une conscience mutuelle pour la résolution de problèmes. A partir de systèmes de simulation à base d'agents, je montre comment la conscience du contexte peut être modélisée. En terme de perspectives, j'expliquerai comment la hausse de la prévalence des agents artificiels dans notre société nous forcera à considérer de nouveaux types d'interactions et de comportements coopératifs

Resilience Model for Teams of Autonomous Unmanned Aerial Vehicles (UAV) Executing Surveillance Missions

Teams of low-cost Unmanned Aerial Vehicles (UAVs) have gained acceptance as an alternative for cooperatively searching and surveilling terrains. These UAVs are assembled with low-reliability components, so unit failures are possible. Losing UAVs to failures decreases the team\u27s coverage efficiency and impacts communication, given that UAVs are also communication nodes. Such is the case of a Flying Ad Hoc Network (FANET), where the failure of a communication node may isolate segments of the network covering several nodes. The main goal of this study is to develop a resilience model that would allow us to analyze the effects of individual UAV failures on the team\u27s performance to improve the team\u27s resilience. The proposed solution models and simulates the UAV team using Agent-Based Modeling and Simulation. UAVs are modeled as autonomous agents, and the searched terrain as a two-dimensional M x N grid. Communication between agents permits having the exact data on the transit and occupation of all cells in real time. Such communication allows the UAV agents to estimate the best alternatives to move within the grid and know the exact number of all agents\u27 visits to the cells. Each UAV is simulated as a hobbyist, fixed-wing airplane equipped with a generic set of actuators and a generic controller. Individual UAV failures are simulated following reliability Fault Trees. Each affected UAV is disabled and eliminated from the pool of active units. After each unit failure, the system generates a new topology. It produces a set of minimum-distance trees for each node (UAV) in the grid. The new trees will thus depict the rearrangement links as required after a node failure or if changes occur in the topology due to node movement. The model should generate parameters such as the number and location of compromised nodes, performance before and after the failure, and the estimated time of restitution needed to model the team\u27s resilience. The study addresses three research goals: identifying appropriate tools for modeling UAV scenarios, developing a model for assessing UAVs team resilience that overcomes previous studies\u27 limitations, and testing the model through multiple simulations. The study fills a gap in the literature as previous studies focus on system communication disruptions (i.e., node failures) without considering UAV unit reliability. This consideration becomes critical as using small, low-cost units prone to failure becomes widespread

Amorphous Computing

The goal of amorphous computing is to identify organizationalprinciples and create programming technologies for obtainingintentional, pre-specified behavior from the cooperation of myriadunreliable parts that are arranged in unknown, irregular, andtime-varying ways. The heightened relevance of amorphous computingtoday stems from the emergence of new technologies that could serve assubstrates for information processing systems of immense power atunprecedentedly low cost, if only we could master the challenge ofprogramming them. This document is a review of amorphous computing

Behavior Flexibility for Autonomous Unmanned Aerial Systems

Autonomous unmanned aerial systems (UAS) could supplement and eventually subsume a substantial portion of the mission set currently executed by remote pilots, making UAS more robust, responsive, and numerous than permitted by teleoperation alone. Unfortunately, the development of robust autonomous systems is difficult, costly, and time-consuming. Furthermore, the resulting systems often make little reuse of proven software components and offer limited adaptability for new tasks. This work presents a development platform for UAS which promotes behavioral flexibility. The platform incorporates the Unified Behavior Framework (a modular, extensible autonomy framework), the Robotic Operating System (a RSF), and PX4 (an open- source flight controller). Simulation of UBF agents identify a combination of reactive robotic control strategies effective for small-scale navigation tasks by a UAS in the presence of obstacles. Finally, flight tests provide a partial validation of the simulated results. The development platform presented in this work offers robust and responsive behavioral flexibility for UAS agents in simulation and reality. This work lays the foundation for further development of a unified autonomous UAS platform supporting advanced planning algorithms and inter-agent communication by providing a behavior-flexible framework in which to implement, execute, extend, and reuse behaviors

Network Performance Management Using Application-centric Key Performance Indicators

The Internet and intranets are viewed as capable of supplying Anything, Anywhere, Anytime and e-commerce, e-government, e-community, and military C4I are now deploying many and varied applications to serve their needs. Network management is currently centralized in operations centers. To assure customer satisfaction with the network performance they typically plan, configure and monitor the network devices to insure an excess of bandwidth, that is overprovision. If this proves uneconomical or if complex and poorly understood interactions of equipment, protocols and application traffic degrade performance creating customer dissatisfaction, another more application-centric, way of managing the network will be needed. This research investigates a new qualitative class of network performance measures derived from the current quantitative metrics known as quality of service (QOS) parameters. The proposed class of qualitative indicators focuses on utilizing current network performance measures (QOS values) to derive abstract quality of experience (QOE) indicators by application class. These measures may provide a more user or application-centric means of assessing network performance even when some individual QOS parameters approach or exceed specified levels. The mathematics of functional analysis suggests treating QOS performance values as a vector, and, by mapping the degradation of the application performance to a characteristic lp-norm curve, a qualitative QOE value (good/poor) can be calculated for each application class. A similar procedure could calculate a QOE node value (satisfactory/unsatisfactory) to represent the service level of the switch or router for the current mix of application traffic. To demonstrate the utility of this approach a discrete event simulation (DES) test-bed, in the OPNET telecommunications simulation environment, was created modeling the topology and traffic of three semi-autonomous networks connected by a backbone. Scenarios, designed to degrade performance by under-provisioning links or nodes, are run to evaluate QOE for an access network. The application classes and traffic load are held constant. Future research would include refinement of the mathematics, many additional simulations and scenarios varying other independent variables. Finally collaboration with researchers in areas as diverse as human computer interaction (HCI), software engineering, teletraffic engineering, and network management will enhance the concepts modeled

Exploring the Effects of Cooperative Adaptive Cruise Control in Mitigating Traffic Congestion

The aim of this research is to examine the impact of CACC (Cooperative Adaptive Cruise Control) equipped vehicles on traffic-flow characteristics of a multilane highway system. The research identifies how CACC vehicles affect the dynamics of traffic flow on a road network and demonstrates the potential benefits of reducing traffic congestion due to stop-and-go traffic conditions. An agent-based traffic simulation model is developed specifically to examine the effect of these intelligent vehicles on the traffic flow dynamics. Traffic performance metrics characterizing the evolution of traffic congestion throughout the road network, are analyzed. Different CACC penetration levels are studied. The positive impact of the CACC technology is demonstrated and shown that it has an impact of increasing the highway capacity and mitigating traffic congestions. This effect is sensitive to the market penetration and the traffic arrival rate. In addition, a progressive deployment strategy for CACC is proposed and validated