Evolution and Dynamics of Tropical River Plumes in the Great Barrier Reef: An Integrated Remote Sensing and In Situ Study

[1] The short-lived but intense discharge of freshwater from tropical rivers into the Great Barrier Reef (GBR) Lagoon and the associated salinity reductions are a critical consideration in marine research and management of the ecologically sensitive GBR World Heritage Area. Salinity provides a unique tracer that gives clues to the origin of river-borne contaminants and allows the influences of storm-induced resuspension and river discharge on turbidity to be clearly distinguished. We describe a field investigation of the evolution and dynamics of the Herbert River plume in the central GBR. Its primary goals were to use an airborne salinity mapper and in situ instruments to study the three-dimensional structure and evolution of the plume and to lay a foundation for numerical modeling studies of its dynamics. The aircraft surveys provided a rapid assessment of the plumes spatial extent, while the in situ data revealed details of its subsurface structure. The Herbert River plume was produced by heavy rainfall associated with tropical storms during the La Nina-dominated 1999/2000 monsoon season. In the near field, the surface expression of the plume boundaries was indicated by sharp color and salinity fronts that were clearly visible from the air and sea surface. In the far field and middle Lagoon, the plume was more dispersed and ultimately merged with the larger-scale salinity gradients and with the remnant plume of the more distant, and larger, Burdekin River. The plume location and structure evolved in response to changing river flows, tidal and subtidal circulation, and wind. Using Garvine\u27s Kelvin number-based scheme, the plume was classified as intermediate in dynamical character and thus is subject to a variety of forcings. The plume evolved in response to changes in the relative intensity of tidal currents and low-frequency circulation due to wind and western boundary current forcing. It also displayed a characteristic hook-shaped\u27\u27 structure, which has been identified previously in numerical plume model studies. This structure appeared in the presence of accelerating along-shelf current flow and horizontal shear and it indicates that the plume circulation had a strongly three-dimensional character. The approach demonstrates the efficacy of combining airborne and in situ methods to observe rapidly evolving coastal salinity structure and dynamics and sets the stage for future satellite-borne studies of larger-scale features showing contrasting salinity distributions

Evolution and dynamics of tropical river plumes in the Great Barrier Reef: an integrated remote sensing and in situ study

The short-lived but intense discharge of freshwater from tropical rivers into the Great Barrier Reef (GBR) Lagoon and the associated salinity reductions are a critical consideration in marine research and management of the ecologically sensitive GBR World Heritage Area. Salinity provides a unique tracer that gives clues to the origin of river-borne contaminants and allows the influences of storm-induced resuspension and river discharge on turbidity to be clearly distinguished. We describe a field investigation of the evolution and dynamics of the Herbert River plume in the central GBR. Its primary goals were to use an airborne salinity mapper and in situ instruments to study the three-dimensional structure and evolution of the plume and to lay a foundation for numerical modeling studies of its dynamics. The aircraft surveys provided a rapid assessment of the plumes spatial extent, while the in situ data revealed details of its subsurface structure. The Herbert River plume was produced by heavy rainfall associated with tropical storms during the La Nina-dominated 1999/2000 monsoon season. In the near field, the surface expression of the plume boundaries was indicated by sharp color and salinity fronts that were clearly visible from the air and sea surface. In the far field and middle Lagoon, the plume was more dispersed and ultimately merged with the larger-scale salinity gradients and with the remnant plume of the more distant, and larger, Burdekin River. The plume location and structure evolved in response to changing river flows, tidal and subtidal circulation, and wind. Using Garvine’s Kelvin number-based scheme, the plume was classified as intermediate in dynamical character and thus is subject to a variety of forcings. The plume evolved in response to changes in the relative intensity of tidal currents and low-frequency circulation due to wind and western boundary current forcing. It also displayed a characteristic ‘‘hook-shaped’’ structure, which has been identified previously in numerical plume model studies. This structure appeared in the presence of accelerating along-shelf current flow and horizontal shear and it indicates that the plume circulation had a strongly three-dimensional character. The approach demonstrates the efficacy of combining airborne and in situ methods to observe rapidly evolving coastal salinity structure and dynamics and sets the stage for future satellite-borne studies of larger-scale features showing contrasting salinity distributions

Aeronautical engineering: A continuing bibliography with indexes (supplement 315)

This bibliography lists 217 reports, articles, and other documents introduced into the NASA scientific and technical information system in Mar. 1995. Subject coverage includes: design, construction and testing of aircraft and aircraft engines; aircraft components, equipment, and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics

Potential for tsunami detection and early-warning using space-based passive microwave radiometry

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2008.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 141-150).The threat of a tsunami in coastal communities is considerable, especially in the Pacific and Indian Oceans. Current warning systems consist of two networks: (1) a network of seismometers, and (2) a network of sea level gauges and bottom pressure recorders. Bottom pressure recorders communicate with ocean surface buoys, which send the data to processing centers through satellite communication uplinks. The ability to quickly and accurately detect a tsunami in the deep ocean is proposed using a new space-based passive microwave radiometer system. Passive microwave radiometry can detect oceanic parameters such as sea-surface temperature and sea surface roughness to contribute to earlier tsunami detection, when the tsunami is farther from shore, which will increase the reaction time for at-risk coastal communities. This thesis will outline a physics based approach to manipulating brightness temperature data from the ocean's surface through the variation as a result of the satellite platform, the sensor, its location, the antenna, and other considerations. The thesis will give a description of how each component of the overall system will change the surface data because the observations are space-based. The thesis will also outline how the current detection system can be compared to the new space-based system. In the future, the comparison method can be used to make an argument to support the system with the best capability to serve as an efficient and accurate tsunami early-warning system.by Rebecca G. Myers.S.M

A study of the solar energy systems and storage devices

Includes abstract.Includes bibliographical references.Following the 2008 severe electricity shortage in South Africa, domestic and industrial users faced incessant periods of blackouts. It is generally believed to be associated with lack of generation capacity. Since then research efforts have been directed towards boosting the generation capacity of the South African network by investing in a mix of power generation projects which include coal, nuclear and renewable energy schemes such as solar and wind. The renewable energy resources are considered a more viable option because of their many advantages such as lower greenhouse gas emissions, inexhaustible, reliable and even cheaper energy cost on the long term. Africa has huge potentials of solar power because of the abundance of direct sunshine in most days of the year. The rising cost of the fossil electricity has made the solar power an attractive option bearing in mind that the cost of the solar power has plummeted steadily in the past few years. Two main technologies are prevalent in the solar power research. These are photovoltaic (PV) systems and the concentrated solar power (CSP). The PV systems are made of solar panels and power electronic circuits. They are mostly economical in small residential units. The CSPs on the other hand which are made of solar field, thermal storage and steam turbine/generator units are economical only in large scale. In this thesis, a 2.5 kW Residential PV system and a 100 MW Molten Salt Power Tower Concentrated Solar Power were developed. The technical model of the photovoltaic panel and the power electronic circuits that connect it to the grid were also developed with Matlab/Simulink while the economic simulation of the PV, as well as the Concentrated Solar Power were carried out with Systems Advisor Model (SAM) using the climate data of Cape Town. The simulation results of this work compared the cost of PV electricity first with Renewable Energy Feed-in Tariff (REFIT) of National Energy Regulator of South Africa (NERSA), and then with the residential tariff charged by the City of Cape Town. Also the cost of electricity using CSP is compared NERSA`s REFIT. Finally the cost of PV electricity is compared with that of CSP. We therefore conclude that, with government incentives, CSP and PV are viable technologies however electricity produced by CSP is cheaper than that of the PV

The optimization of multiple antenna broadband wireless communications. A study of propagation, space-time coding and spatial envelope correlation in Multiple Input, Multiple Output radio systems

This work concentrates on the application of diversity techniques and space time block coding for future mobile wireless communications. The initial system analysis employs a space-time coded OFDM transmitter over a multipath Rayleigh channel, and a receiver which uses a selection combining diversity technique. The performance of this combined scenario is characterised in terms of the bit error rate and throughput. A novel four element QOSTBC scheme is introduced, it is created by reforming the detection matrix of the original QOSTBC scheme, for which an orthogonal channel matrix is derived. This results in a computationally less complex linear decoding scheme as compared with the original QOSTBC. Space time coding schemes for three, four and eight transmitters were also derived using a Hadamard matrix. The practical optimization of multi-antenna networks is studied for realistic indoor and mixed propagation scenarios. The starting point is a detailed analysis of the throughput and field strength distributions for a commercial dual band 802.11n MIMO radio operating indoors in a variety of line of sight and non-line of sight scenarios. The physical model of the space is based on architectural schematics, and realistic propagation data for the construction materials. The modelling is then extended and generalized to a multi-storey indoor environment, and a large mixed site for indoor and outdoor channels based on the Bradford University campus. The implications for the physical layer are also explored through the specification of antenna envelope correlation coefficients. Initially this is for an antenna module configuration with two independent antennas in close proximity. An operational method is proposed using the scattering parameters of the system and which incorporates the intrinsic power losses of the radiating elements. The method is extended to estimate the envelope correlation coefficient for any two elements in a general (N,N) MIMO antenna array. Three examples are presented to validate this technique, and very close agreement is shown to exist between this method and the full electromagnetic analysis using the far field antenna radiation patterns

Development and Experimental Analysis of Wireless High Accuracy Ultra-Wideband Localization Systems for Indoor Medical Applications

This dissertation addresses several interesting and relevant problems in the field of wireless technologies applied to medical applications and specifically problems related to ultra-wideband high accuracy localization for use in the operating room. This research is cross disciplinary in nature and fundamentally builds upon microwave engineering, software engineering, systems engineering, and biomedical engineering. A good portion of this work has been published in peer reviewed microwave engineering and biomedical engineering conferences and journals. Wireless technologies in medicine are discussed with focus on ultra-wideband positioning in orthopedic surgical navigation. Characterization of the operating room as a medium for ultra-wideband signal transmission helps define system design requirements. A discussion of the first generation positioning system provides a context for understanding the overall system architecture of the second generation ultra-wideband positioning system outlined in this dissertation. A system-level simulation framework provides a method for rapid prototyping of ultra-wideband positioning systems which takes into account all facets of the system (analog, digital, channel, experimental setup). This provides a robust framework for optimizing overall system design in realistic propagation environments. A practical approach is taken to outline the development of the second generation ultra-wideband positioning system which includes an integrated tag design and real-time dynamic tracking of multiple tags. The tag and receiver designs are outlined as well as receiver-side digital signal processing, system-level design support for multi-tag tracking, and potential error sources observed in dynamic experiments including phase center error, clock jitter and drift, and geometric position dilution of precision. An experimental analysis of the multi-tag positioning system provides insight into overall system performance including the main sources of error. A five base station experiment shows the potential of redundant base stations in improving overall dynamic accuracy. Finally, the system performance in low signal-to-noise ratio and non-line-of-sight environments is analyzed by focusing on receiver-side digitally-implemented ranging algorithms including leading-edge detection and peak detection. These technologies are aimed at use in next-generation medical systems with many applications including surgical navigation, wireless telemetry, medical asset tracking, and in vivo wireless sensors

NASA Tech Briefs, November 2001

Topics include: special coverage section on data acquisition, and sections on electronic components and systems, software, materials, machinery/automation, physical sciences, book and reports, and a special section of Photonics Tech Briefs

NASA Tech Briefs, July 1995

Topics include: mechanical components, electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences, book and reports, and a special section of Federal laboratory computing Tech Briefs

FPGA-based High Performance Diagnostics For Fusion

High performance diagnostics are an important aspect of fusion research. Increasing shot-lengths paired with the requirement for higher accuracy and speed make it mandatory to employ new technology to cope with the increasing demands on digitization and data handling. Field programmable gate arrays (FPGAs) are well known in high performance applications. Their ability to handle multiple fast data streams whilst remaining programmable make them an ideal tool for diagnostic development. Both the improvement of old and the design of new diagnostics can benefit from FPGA-technology and increase the amount of accessible physics significantly. In this work the developments on two FPGA-based diagnostics are presented. In the first part a new open-hardware low-cost FPGA-based digitizer is presented for the MAST-Upgrade (MAST-U) integral electron density interferometer. The system is shown to have an optically limited phase accuracy and a detection bandwidth of over 3.5 MHz. Data is acquired continuously at 20 MS/s and streamed to an acquisition PC via optical fiber. By employing a dual-FPGA approach real-time processing of the density signal can be achieved despite severly limited resources, thus providing a control signal for the MAST-U plasma control system system with less than 8 μs latency. Due to MAST-U being still inoperable, in-situ testing has been conducted on the ASDEX Upgrade, where fast wave physics up to 3.5 MHz could first be observed. The second part presents developments to the Synthetic Aperture Microwave Imaging (SAMI) diagnostic. In addition to improving the utilization of long shot-lengths and enabling dual-polarized acquisition the system has been enhanced to continuously acquire active probing profiles for 2D Doppler back-scattering (DBS), a technique recently developed using SAMI. The aim is to measure pitch angle profiles to derive the edge current density. SAMI has been transferred to the NSTX-Upgrade and integrated into the experiment’s infrastructure, where it has been acquiring data since May 2016. As part of this move an investigation into near-field effects on SAMI’s image reconstruction algorithms was conducted